* [PATCH] ARM: shmobile: Update r8a7791 CPU freq to 1500MHz in DTS
@ 2014-03-06 3:15 Magnus Damm
2014-03-06 23:57 ` Simon Horman
0 siblings, 1 reply; 2+ messages in thread
From: Magnus Damm @ 2014-03-06 3:15 UTC (permalink / raw)
To: linux-arm-kernel
From: Magnus Damm <damm@opensource.se>
The correct maximum CPU frequency for r8a7791 is 1500 MHz
so update the r8a7791 SoC DTS to reflect this.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
arch/arm/boot/dts/r8a7791.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- 0001/arch/arm/boot/dts/r8a7791.dtsi
+++ work/arch/arm/boot/dts/r8a7791.dtsi 2014-03-06 10:52:09.000000000 +0900
@@ -37,14 +37,14 @@
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0>;
- clock-frequency = <1300000000>;
+ clock-frequency = <1500000000>;
};
cpu1: cpu at 1 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <1>;
- clock-frequency = <1300000000>;
+ clock-frequency = <1500000000>;
};
};
^ permalink raw reply [flat|nested] 2+ messages in thread
* [PATCH] ARM: shmobile: Update r8a7791 CPU freq to 1500MHz in DTS
2014-03-06 3:15 [PATCH] ARM: shmobile: Update r8a7791 CPU freq to 1500MHz in DTS Magnus Damm
@ 2014-03-06 23:57 ` Simon Horman
0 siblings, 0 replies; 2+ messages in thread
From: Simon Horman @ 2014-03-06 23:57 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Mar 06, 2014 at 12:15:36PM +0900, Magnus Damm wrote:
> From: Magnus Damm <damm@opensource.se>
>
> The correct maximum CPU frequency for r8a7791 is 1500 MHz
> so update the r8a7791 SoC DTS to reflect this.
>
> Signed-off-by: Magnus Damm <damm@opensource.se>
Thanks, I have queued this up.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-03-06 23:57 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-03-06 3:15 [PATCH] ARM: shmobile: Update r8a7791 CPU freq to 1500MHz in DTS Magnus Damm
2014-03-06 23:57 ` Simon Horman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox