From: linux@arm.linux.org.uk (Russell King - ARM Linux)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH v2 1/4] drm: Introduce generic probe function for component based masters.
Date: Mon, 19 Oct 2015 13:25:37 +0100 [thread overview]
Message-ID: <20151019122537.GZ32532@n2100.arm.linux.org.uk> (raw)
In-Reply-To: <1445257313-7147-2-git-send-email-Liviu.Dudau@arm.com>
On Mon, Oct 19, 2015 at 01:21:50PM +0100, Liviu Dudau wrote:
> A lot of component based DRM drivers use a variant of the same code
> as the probe function. They bind the crtc ports in the first iteration
> and then scan through the child nodes and bind the encoders attached
> to the remote endpoints. Factor the common code into a separate
> function called drm_of_component_probe() in order to increase code
> reuse.
>
> Cc: David Airlie <airlied@linux.ie>
> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
> ---
> drivers/gpu/drm/drm_of.c | 92 ++++++++++++++++++++++++++++++++++++++++++++++++
> include/drm/drm_of.h | 12 +++++++
> 2 files changed, 104 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_of.c b/drivers/gpu/drm/drm_of.c
> index be38840..cf16240 100644
> --- a/drivers/gpu/drm/drm_of.c
> +++ b/drivers/gpu/drm/drm_of.c
> @@ -1,3 +1,4 @@
> +#include <linux/component.h>
> #include <linux/export.h>
> #include <linux/list.h>
> #include <linux/of_graph.h>
> @@ -61,3 +62,94 @@ uint32_t drm_of_find_possible_crtcs(struct drm_device *dev,
> return possible_crtcs;
> }
> EXPORT_SYMBOL(drm_of_find_possible_crtcs);
> +
> +/**
> + * drm_of_component_probe - Generic probe function for a component based master
> + * @dev: master device containing the OF node
> + * @compare_of: compare function used for matching components
> + * @master_ops: component master ops to be used
> + *
> + * Parse the platform device OF node and bind all the components associated
> + * with the master. Interface ports are added before the encoders in order to
> + * satisfy their .bind requirements
> + * See Documentation/devicetree/bindings/graph.txt for the bindings.
> + *
> + * Returns zero if successful, or one of the standard error codes if it fails.
> + */
> +int drm_of_component_probe(struct device *dev,
> + int (*compare_of)(struct device *, void *),
> + const struct component_master_ops *master_ops)
> +{
...
> + ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
> + if (ret)
> + return ret;
Please don't move this into here, it's completely inappropriate. Just
because something makes use of this does not mean they only support
32-bit DMA. Besides, this has nothing to do with whether or not it's
OF-based or not.
> +
> + return component_master_add_with_match(dev, master_ops, match);
> +}
> +EXPORT_SYMBOL(drm_of_component_probe);
> diff --git a/include/drm/drm_of.h b/include/drm/drm_of.h
> index 2441f71..7c0c05b 100644
> --- a/include/drm/drm_of.h
> +++ b/include/drm/drm_of.h
> @@ -1,18 +1,30 @@
> #ifndef __DRM_OF_H__
> #define __DRM_OF_H__
>
> +struct component_master_ops;
> +struct device;
> struct drm_device;
> struct device_node;
>
> #ifdef CONFIG_OF
> extern uint32_t drm_of_find_possible_crtcs(struct drm_device *dev,
> struct device_node *port);
> +extern int drm_of_component_probe(struct device *dev,
> + int (*compare_of)(struct device *, void *),
> + const struct component_master_ops *master_ops);
> #else
> static inline uint32_t drm_of_find_possible_crtcs(struct drm_device *dev,
> struct device_node *port)
> {
> return 0;
> }
> +
> +static inline int drm_of_component_probe(struct device *dev,
> + int (*compare_of)(struct device *, void *),
> + const struct component_master_ops *master_ops)
Some of these lines will fail checkpatch. It would be nice to avoid
lines longer than 80 columns.
--
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
next prev parent reply other threads:[~2015-10-19 12:25 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-19 12:21 [RFC PATCH v2 0/4] drm: Cleanup probe function for component based masters Liviu Dudau
2015-10-19 12:21 ` [RFC PATCH v2 1/4] drm: Introduce generic " Liviu Dudau
2015-10-19 12:25 ` Russell King - ARM Linux [this message]
2015-10-19 13:02 ` Liviu Dudau
2015-10-19 13:26 ` Russell King - ARM Linux
2015-10-19 13:32 ` Liviu Dudau
2015-10-19 13:38 ` Russell King - ARM Linux
2015-10-19 14:42 ` Daniel Vetter
2015-10-19 14:50 ` Russell King - ARM Linux
2015-10-19 15:04 ` Emil Velikov
2015-10-19 15:21 ` Russell King - ARM Linux
2015-10-19 15:07 ` Liviu Dudau
2015-10-19 12:21 ` [RFC PATCH v2 2/4] drm/imx: Convert the probe function to the generic drm_of_component_probe() Liviu Dudau
2015-10-19 12:21 ` [RFC PATCH v2 3/4] drm/rockchip: " Liviu Dudau
2015-10-19 12:21 ` [RFC PATCH v2 4/4] drm/armada: " Liviu Dudau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151019122537.GZ32532@n2100.arm.linux.org.uk \
--to=linux@arm.linux.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox