[PATCH] dt-bindings: interrupt-controller: add SoC-specific compatible string to Marvell ODMI

[PATCH] dt-bindings: interrupt-controller: add SoC-specific compatible string to Marvell ODMI

[Thomas Petazzoni]

As requested by Rob Herring, this commit adds a SoC-specific
compatible string to the Marvell ODMI DT binding.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
This commit applies on top of the Marvell ODMI driver patch, which has
already been merged.
---
 .../bindings/interrupt-controller/marvell,odmi-controller.txt      | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt
index 252d5c9..8af0a8e 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt
@@ -6,7 +6,9 @@ which can be used by on-board peripheral for MSI interrupts.
 
 Required properties:
 
-- compatible           : The value here should contain "marvell,odmi-controller".
+- compatible           : The value here should contain:
+
+    "marvell,ap806-odmi-controller", "marvell,odmi-controller".
 
 - interrupt,controller : Identifies the node as an interrupt controller.
 
@@ -29,7 +31,8 @@ Required properties:
 Example:
 
 	odmi: odmi at 300000 {
-		compatible = "marvell,odmi-controller";
+		compatible = "marvell,ap806-odm-controller",
+			     "marvell,odmi-controller";
 		interrupt-controller;
 		msi-controller;
 		marvell,odmi-frames = <4>;
-- 
2.6.4

[PATCH] dt-bindings: interrupt-controller: add SoC-specific compatible string to Marvell ODMI

[Jason Cooper]

Morning, Thomas!

On Wed, Feb 24, 2016 at 04:24:54PM +0100, Thomas Petazzoni wrote:
> As requested by Rob Herring, this commit adds a SoC-specific
> compatible string to the Marvell ODMI DT binding.
> 
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> ---
> This commit applies on top of the Marvell ODMI driver patch, which has
> already been merged.
> ---
>  .../bindings/interrupt-controller/marvell,odmi-controller.txt      | 7 +++++--
>  1 file changed, 5 insertions(+), 2 deletions(-)

Applied to irqchip/mvebu

thx,

Jason.

[PATCH] dt-bindings: interrupt-controller: add SoC-specific compatible string to Marvell ODMI

[Rob Herring]

On Wed, Feb 24, 2016 at 04:24:54PM +0100, Thomas Petazzoni wrote:
> As requested by Rob Herring, this commit adds a SoC-specific
> compatible string to the Marvell ODMI DT binding.
> 
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> ---
> This commit applies on top of the Marvell ODMI driver patch, which has
> already been merged.
> ---
>  .../bindings/interrupt-controller/marvell,odmi-controller.txt      | 7 +++++--
>  1 file changed, 5 insertions(+), 2 deletions(-)

I see this is already merged, but for the record:

Acked-by: Rob Herring <robh@kernel.org>

There is a typo in the example though.

> 
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt
> index 252d5c9..8af0a8e 100644
> --- a/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt
> +++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt
> @@ -6,7 +6,9 @@ which can be used by on-board peripheral for MSI interrupts.
>  
>  Required properties:
>  
> -- compatible           : The value here should contain "marvell,odmi-controller".
> +- compatible           : The value here should contain:
> +
> +    "marvell,ap806-odmi-controller", "marvell,odmi-controller".
>  
>  - interrupt,controller : Identifies the node as an interrupt controller.
>  
> @@ -29,7 +31,8 @@ Required properties:
>  Example:
>  
>  	odmi: odmi at 300000 {
> -		compatible = "marvell,odmi-controller";
> +		compatible = "marvell,ap806-odm-controller",

s/odm/odmi/

> +			     "marvell,odmi-controller";
>  		interrupt-controller;
>  		msi-controller;
>  		marvell,odmi-frames = <4>;
> -- 
> 2.6.4
>