Regression: usb serial gadget on sama5d3 broken

Regression: usb serial gadget on sama5d3 broken

[Peter Rosin]

Hi!

I'm suffering from a regression while using the usb gadget port on the
sama5d3 to get terminal access to the device in question (CONFIG_USB_G_SERIAL).

I get this message when I try to connect:
udc: ep: Invalid setup request: 02.01 v0000 i0081 l0, halting endpoint...

A bisect blames commit v4.7-rc1-21-gc32b5bcfa3c4 "ARM: dts: at91: Fix
USB endpoint nodes".

And indeed, reverting that commit on top of v4.9-rc1 fixes things,
although that doesn't look like the best of fixes...

BTW, the bisect was extremely painful since v4.7-rc1 seemed broken
somewhere in the overlayfs area. I hope I will never ever need to bisect
in the v4.6..v4.7 area again. This was the second time, the first time
I was chasing a gpio interrupt bug, but I never found out what was wrong
and stopped looking when v4.9-rc1 turned out to be ok even though v4.8
was bad, it was just too painful to look for things that already seemed
fixed.

Cheers,
Peter

Regression: usb serial gadget on sama5d3 broken

[Nicolas Ferre]

Le 17/10/2016 ? 14:53, Peter Rosin a ?crit :
> Hi!
> 
> I'm suffering from a regression while using the usb gadget port on the
> sama5d3 to get terminal access to the device in question (CONFIG_USB_G_SERIAL).
> 
> I get this message when I try to connect:
> udc: ep: Invalid setup request: 02.01 v0000 i0081 l0, halting endpoint...
> 
> A bisect blames commit v4.7-rc1-21-gc32b5bcfa3c4 "ARM: dts: at91: Fix
> USB endpoint nodes".
> 
> And indeed, reverting that commit on top of v4.9-rc1 fixes things,
> although that doesn't look like the best of fixes...
> 
> BTW, the bisect was extremely painful since v4.7-rc1 seemed broken
> somewhere in the overlayfs area. I hope I will never ever need to bisect
> in the v4.6..v4.7 area again. This was the second time, the first time
> I was chasing a gpio interrupt bug, but I never found out what was wrong
> and stopped looking when v4.9-rc1 turned out to be ok even though v4.8
> was bad, it was just too painful to look for things that already seemed
> fixed.

I guess that you are referring to the regression listed here:
https://www.mail-archive.com/linux-kernel at vger.kernel.org/msg1239220.html

The patch is available and will hopefully land in an official kernel
soon (4.8.1) as said by Felipe and Greg.

Sorry for the inconvenience. Best regards,
-- 
Nicolas Ferre

Regression: usb serial gadget on sama5d3 broken

[Peter Rosin]

On 2016-10-17 16:54, Nicolas Ferre wrote:
> Le 17/10/2016 ? 14:53, Peter Rosin a ?crit :
>> Hi!
>>
>> I'm suffering from a regression while using the usb gadget port on the
>> sama5d3 to get terminal access to the device in question (CONFIG_USB_G_SERIAL).
>>
>> I get this message when I try to connect:
>> udc: ep: Invalid setup request: 02.01 v0000 i0081 l0, halting endpoint...
>>
>> A bisect blames commit v4.7-rc1-21-gc32b5bcfa3c4 "ARM: dts: at91: Fix
>> USB endpoint nodes".
>>
>> And indeed, reverting that commit on top of v4.9-rc1 fixes things,
>> although that doesn't look like the best of fixes...
>>
>> BTW, the bisect was extremely painful since v4.7-rc1 seemed broken
>> somewhere in the overlayfs area. I hope I will never ever need to bisect
>> in the v4.6..v4.7 area again. This was the second time, the first time
>> I was chasing a gpio interrupt bug, but I never found out what was wrong
>> and stopped looking when v4.9-rc1 turned out to be ok even though v4.8
>> was bad, it was just too painful to look for things that already seemed
>> fixed.
> 
> I guess that you are referring to the regression listed here:
> https://www.mail-archive.com/linux-kernel at vger.kernel.org/msg1239220.html
> 
> The patch is available and will hopefully land in an official kernel
> soon (4.8.1) as said by Felipe and Greg.
> 
> Sorry for the inconvenience. Best regards,

Ok, I tried "usb: gadget: udc: atmel: fix endpoint name" and it fixes
things for me too. But shouldn't the memory for the now dynamic name be
allocated with devm_kasprintf instead of that plain kasprint? If you
are pedantic...

Cheers,
Peter

Regression: usb serial gadget on sama5d3 broken

[Alexandre Belloni]

On 17/10/2016 at 19:50:48 +0200, Peter Rosin wrote :
> On 2016-10-17 16:54, Nicolas Ferre wrote:
> > Le 17/10/2016 ? 14:53, Peter Rosin a ?crit :
> >> Hi!
> >>
> >> I'm suffering from a regression while using the usb gadget port on the
> >> sama5d3 to get terminal access to the device in question (CONFIG_USB_G_SERIAL).
> >>
> >> I get this message when I try to connect:
> >> udc: ep: Invalid setup request: 02.01 v0000 i0081 l0, halting endpoint...
> >>
> >> A bisect blames commit v4.7-rc1-21-gc32b5bcfa3c4 "ARM: dts: at91: Fix
> >> USB endpoint nodes".
> >>
> >> And indeed, reverting that commit on top of v4.9-rc1 fixes things,
> >> although that doesn't look like the best of fixes...
> >>
> >> BTW, the bisect was extremely painful since v4.7-rc1 seemed broken
> >> somewhere in the overlayfs area. I hope I will never ever need to bisect
> >> in the v4.6..v4.7 area again. This was the second time, the first time
> >> I was chasing a gpio interrupt bug, but I never found out what was wrong
> >> and stopped looking when v4.9-rc1 turned out to be ok even though v4.8
> >> was bad, it was just too painful to look for things that already seemed
> >> fixed.
> > 
> > I guess that you are referring to the regression listed here:
> > https://www.mail-archive.com/linux-kernel at vger.kernel.org/msg1239220.html
> > 
> > The patch is available and will hopefully land in an official kernel
> > soon (4.8.1) as said by Felipe and Greg.
> > 
> > Sorry for the inconvenience. Best regards,
> 
> Ok, I tried "usb: gadget: udc: atmel: fix endpoint name" and it fixes
> things for me too. But shouldn't the memory for the now dynamic name be
> allocated with devm_kasprintf instead of that plain kasprint? If you
> are pedantic...
> 

That wouldn't be a bad idea.

-- 
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com