[PATCH 1/3] ARM: dts: exynos: Document eMMC/SD/SDIO devices in Exynos5250 Snow board

[PATCH 1/3] ARM: dts: exynos: Document eMMC/SD/SDIO devices in Exynos5250 Snow board

[Javier Martinez Canillas]

There's a cognitive load to figure out which mmc device node corresponds
to the eMMC flash, uSD card and WiFI SDIO module on the Snow boards.

So it's better to have comments in the DTS to make this more clear.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/exynos5250-snow-common.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index d5d51916bb74..8f3a80430748 100644
--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -523,6 +523,7 @@
 	status = "okay";
 };
 
+/* eMMC flash */
 &mmc_0 {
 	status = "okay";
 	num-slots = <1>;
@@ -536,6 +537,7 @@
 	cap-mmc-highspeed;
 };
 
+/* uSD card */
 &mmc_2 {
 	status = "okay";
 	num-slots = <1>;
@@ -553,6 +555,8 @@
 /*
  * On Snow we've got SIP WiFi and so can keep drive strengths low to
  * reduce EMI.
+ *
+ * WiFi SDIO module
  */
 &mmc_3 {
 	status = "okay";
-- 
2.7.4

[PATCH 2/3] ARM: dts: exynos: Document eMMC/SD/SDIO devices in Exynos5420 Pit board

[Javier Martinez Canillas]

There's a cognitive load to figure out which mmc device nodes corresponds
to the eMMC flash, uSD card and WiFI SDIO module on the Peach Pit board.

So it's better to have comments in the DTS to make this more clear.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/exynos5420-peach-pit.dts | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index ec4a00f1ce01..1f964ec35c5e 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -697,6 +697,7 @@
 	status = "okay";
 };
 
+/* eMMC flash */
 &mmc_0 {
 	status = "okay";
 	num-slots = <1>;
@@ -714,6 +715,7 @@
 	bus-width = <8>;
 };
 
+/* WiFi SDIO module */
 &mmc_1 {
 	status = "okay";
 	num-slots = <1>;
@@ -733,6 +735,7 @@
 	vqmmc-supply = <&buck10_reg>;
 };
 
+/* uSD card */
 &mmc_2 {
 	status = "okay";
 	num-slots = <1>;
-- 
2.7.4

[PATCH 3/3] ARM: dts: exynos: Document eMMC/SD/SDIO devices in Exynos5800 Peach Pi board

[Javier Martinez Canillas]

There's a cognitive load to figure out which mmc device nodes corresponds
to the eMMC flash, uSD card and WiFI SDIO module on the Peach Pi board.

So it's better to have comments in the DTS to make this more clear.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/exynos5800-peach-pi.dts | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 01f466816fea..f9ff7f07ae0c 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -665,6 +665,7 @@
 	status = "okay";
 };
 
+/* eMMC flash */
 &mmc_0 {
 	status = "okay";
 	num-slots = <1>;
@@ -683,6 +684,7 @@
 	bus-width = <8>;
 };
 
+/* WiFi SDIO module */
 &mmc_1 {
 	status = "okay";
 	num-slots = <1>;
@@ -702,6 +704,7 @@
 	vqmmc-supply = <&buck10_reg>;
 };
 
+/* uSD card */
 &mmc_2 {
 	status = "okay";
 	num-slots = <1>;
-- 
2.7.4

[PATCH 1/3] ARM: dts: exynos: Document eMMC/SD/SDIO devices in Exynos5250 Snow board

[Krzysztof Kozlowski]

On Thu, Oct 27, 2016 at 02:11:41PM -0300, Javier Martinez Canillas wrote:
> There's a cognitive load to figure out which mmc device node corresponds
> to the eMMC flash, uSD card and WiFI SDIO module on the Snow boards.
> 
> So it's better to have comments in the DTS to make this more clear.
> 
> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
> ---
> 
>  arch/arm/boot/dts/exynos5250-snow-common.dtsi | 4 ++++
>  1 file changed, 4 insertions(+)

Thanks, applied after squashing three into one. These are only comments,
so no impact on the code, and meaning/goal of them is exactly same.

Best regards,
Krzysztof

[PATCH 1/3] ARM: dts: exynos: Document eMMC/SD/SDIO devices in Exynos5250 Snow board

[Javier Martinez Canillas]

Hello Krzysztof,

On 10/28/2016 10:34 AM, Krzysztof Kozlowski wrote:
> On Thu, Oct 27, 2016 at 02:11:41PM -0300, Javier Martinez Canillas wrote:
>> There's a cognitive load to figure out which mmc device node corresponds
>> to the eMMC flash, uSD card and WiFI SDIO module on the Snow boards.
>>
>> So it's better to have comments in the DTS to make this more clear.
>>
>> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
>> ---
>>
>>  arch/arm/boot/dts/exynos5250-snow-common.dtsi | 4 ++++
>>  1 file changed, 4 insertions(+)
> 
> Thanks, applied after squashing three into one. These are only comments,
> so no impact on the code, and meaning/goal of them is exactly same.
> 

Ok, sounds good to me. Thanks!

> Best regards,
> Krzysztof
> 

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America