* [PATCH 1/3] ARM: davinci: da830: Handle vbus with a regulator
2016-11-08 18:57 [PATCH 0/3] [PART 2/4] ARM: davinci: OHCI: Use a regulator instead of callbacks Axel Haslam
@ 2016-11-08 18:57 ` Axel Haslam
2016-11-08 18:57 ` [PATCH 2/3] ARM: davinci: hawk: Remove vbus and over current gpios Axel Haslam
2016-11-08 18:57 ` [PATCH 3/3] ARM: davinci: remove ohci platform usage Axel Haslam
2 siblings, 0 replies; 4+ messages in thread
From: Axel Haslam @ 2016-11-08 18:57 UTC (permalink / raw)
To: linux-arm-kernel
The usb driver can now take a regulator instead of the platform
callbacks for vbus handling. Lets use a regulator so we can remove
the callbacks in a later patch.
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
---
arch/arm/mach-davinci/board-da830-evm.c | 108 +++++++++++---------------------
1 file changed, 38 insertions(+), 70 deletions(-)
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 5db0901..16a401a 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -14,6 +14,7 @@
#include <linux/console.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/i2c/pcf857x.h>
@@ -28,6 +29,7 @@
#include <linux/platform_data/spi-davinci.h>
#include <linux/platform_data/usb-davinci.h>
#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -38,72 +40,48 @@
#include <mach/da8xx.h>
#define DA830_EVM_PHY_ID ""
-/*
- * USB1 VBUS is controlled by GPIO1[15], over-current is reported on GPIO2[4].
- */
-#define ON_BD_USB_DRV GPIO_TO_PIN(1, 15)
-#define ON_BD_USB_OVC GPIO_TO_PIN(2, 4)
static const short da830_evm_usb11_pins[] = {
DA830_GPIO1_15, DA830_GPIO2_4,
-1
};
-static da8xx_ocic_handler_t da830_evm_usb_ocic_handler;
-
-static int da830_evm_usb_set_power(unsigned port, int on)
-{
- gpio_set_value(ON_BD_USB_DRV, on);
- return 0;
-}
+static struct regulator_consumer_supply usb_ohci_consumer_supply =
+ REGULATOR_SUPPLY("vbus", "ohci-da8xx");
-static int da830_evm_usb_get_power(unsigned port)
-{
- return gpio_get_value(ON_BD_USB_DRV);
-}
-
-static int da830_evm_usb_get_oci(unsigned port)
-{
- return !gpio_get_value(ON_BD_USB_OVC);
-}
-
-static irqreturn_t da830_evm_usb_ocic_irq(int, void *);
-
-static int da830_evm_usb_ocic_notify(da8xx_ocic_handler_t handler)
-{
- int irq = gpio_to_irq(ON_BD_USB_OVC);
- int error = 0;
-
- if (handler != NULL) {
- da830_evm_usb_ocic_handler = handler;
-
- error = request_irq(irq, da830_evm_usb_ocic_irq,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- "OHCI over-current indicator", NULL);
- if (error)
- pr_err("%s: could not request IRQ to watch over-current indicator changes\n",
- __func__);
- } else
- free_irq(irq, NULL);
-
- return error;
-}
+static struct regulator_init_data usb_ohci_initdata = {
+ .consumer_supplies = &usb_ohci_consumer_supply,
+ .num_consumer_supplies = 1,
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+};
-static struct da8xx_ohci_root_hub da830_evm_usb11_pdata = {
- .set_power = da830_evm_usb_set_power,
- .get_power = da830_evm_usb_get_power,
- .get_oci = da830_evm_usb_get_oci,
- .ocic_notify = da830_evm_usb_ocic_notify,
+static struct fixed_voltage_config usb_ohci_config = {
+ .supply_name = "vbus",
+ .microvolts = 5000000,
+ .gpio = GPIO_TO_PIN(1, 15),
+ .enable_high = 1,
+ .enabled_at_boot = 0,
+ .init_data = &usb_ohci_initdata,
+};
- /* TPS2065 switch @ 5V */
- .potpgt = (3 + 1) / 2, /* 3 ms max */
+static struct platform_device da8xx_usb11_regulator = {
+ .name = "reg-fixed-voltage",
+ .id = 0,
+ .dev = {
+ .platform_data = &usb_ohci_config,
+ },
};
-static irqreturn_t da830_evm_usb_ocic_irq(int irq, void *dev_id)
-{
- da830_evm_usb_ocic_handler(&da830_evm_usb11_pdata, 1);
- return IRQ_HANDLED;
-}
+static struct gpiod_lookup_table usb11_gpios_table = {
+ .dev_id = "reg-fixed-voltage.0",
+ .table = {
+ /* gpio chip 1 contains gpio range 32-63 */
+ GPIO_LOOKUP("davinci_gpio.1", 4, "over-current",
+ GPIO_ACTIVE_LOW),
+ },
+};
static __init void da830_evm_usb_init(void)
{
@@ -145,23 +123,13 @@ static __init void da830_evm_usb_init(void)
return;
}
- ret = gpio_request(ON_BD_USB_DRV, "ON_BD_USB_DRV");
- if (ret) {
- pr_err("%s: failed to request GPIO for USB 1.1 port power control: %d\n",
- __func__, ret);
- return;
- }
- gpio_direction_output(ON_BD_USB_DRV, 0);
+ gpiod_add_lookup_table(&usb11_gpios_table);
- ret = gpio_request(ON_BD_USB_OVC, "ON_BD_USB_OVC");
- if (ret) {
- pr_err("%s: failed to request GPIO for USB 1.1 port over-current indicator: %d\n",
- __func__, ret);
- return;
- }
- gpio_direction_input(ON_BD_USB_OVC);
+ ret = platform_device_register(&da8xx_usb11_regulator);
+ if (ret)
+ pr_warn("fail to add ohci regulator\n");
- ret = da8xx_register_usb11(&da830_evm_usb11_pdata);
+ ret = da8xx_register_usb11(NULL);
if (ret)
pr_warn("%s: USB 1.1 registration failed: %d\n", __func__, ret);
}
--
2.10.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH 2/3] ARM: davinci: hawk: Remove vbus and over current gpios
2016-11-08 18:57 [PATCH 0/3] [PART 2/4] ARM: davinci: OHCI: Use a regulator instead of callbacks Axel Haslam
2016-11-08 18:57 ` [PATCH 1/3] ARM: davinci: da830: Handle vbus with a regulator Axel Haslam
@ 2016-11-08 18:57 ` Axel Haslam
2016-11-08 18:57 ` [PATCH 3/3] ARM: davinci: remove ohci platform usage Axel Haslam
2 siblings, 0 replies; 4+ messages in thread
From: Axel Haslam @ 2016-11-08 18:57 UTC (permalink / raw)
To: linux-arm-kernel
The hawk board VBUS is fixed to a 5v source, and the over
current pin is actually not connected to the SoC.
Do not reseve these gpios for OHCI as they are not related
to usb.
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
---
arch/arm/mach-davinci/board-omapl138-hawk.c | 99 ++---------------------------
1 file changed, 4 insertions(+), 95 deletions(-)
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index a4e8726..a252404 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -28,9 +28,6 @@
#define DA850_HAWK_MMCSD_CD_PIN GPIO_TO_PIN(3, 12)
#define DA850_HAWK_MMCSD_WP_PIN GPIO_TO_PIN(3, 13)
-#define DA850_USB1_VBUS_PIN GPIO_TO_PIN(2, 4)
-#define DA850_USB1_OC_PIN GPIO_TO_PIN(6, 13)
-
static short omapl138_hawk_mii_pins[] __initdata = {
DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
@@ -181,76 +178,10 @@ static __init void omapl138_hawk_mmc_init(void)
gpio_free(DA850_HAWK_MMCSD_CD_PIN);
}
-static irqreturn_t omapl138_hawk_usb_ocic_irq(int irq, void *dev_id);
-static da8xx_ocic_handler_t hawk_usb_ocic_handler;
-
-static const short da850_hawk_usb11_pins[] = {
- DA850_GPIO2_4, DA850_GPIO6_13,
- -1
-};
-
-static int hawk_usb_set_power(unsigned port, int on)
-{
- gpio_set_value(DA850_USB1_VBUS_PIN, on);
- return 0;
-}
-
-static int hawk_usb_get_power(unsigned port)
-{
- return gpio_get_value(DA850_USB1_VBUS_PIN);
-}
-
-static int hawk_usb_get_oci(unsigned port)
-{
- return !gpio_get_value(DA850_USB1_OC_PIN);
-}
-
-static int hawk_usb_ocic_notify(da8xx_ocic_handler_t handler)
-{
- int irq = gpio_to_irq(DA850_USB1_OC_PIN);
- int error = 0;
-
- if (handler != NULL) {
- hawk_usb_ocic_handler = handler;
-
- error = request_irq(irq, omapl138_hawk_usb_ocic_irq,
- IRQF_TRIGGER_RISING |
- IRQF_TRIGGER_FALLING,
- "OHCI over-current indicator", NULL);
- if (error)
- pr_err("%s: could not request IRQ to watch "
- "over-current indicator changes\n", __func__);
- } else {
- free_irq(irq, NULL);
- }
- return error;
-}
-
-static struct da8xx_ohci_root_hub omapl138_hawk_usb11_pdata = {
- .set_power = hawk_usb_set_power,
- .get_power = hawk_usb_get_power,
- .get_oci = hawk_usb_get_oci,
- .ocic_notify = hawk_usb_ocic_notify,
- /* TPS2087 switch @ 5V */
- .potpgt = (3 + 1) / 2, /* 3 ms max */
-};
-
-static irqreturn_t omapl138_hawk_usb_ocic_irq(int irq, void *dev_id)
-{
- hawk_usb_ocic_handler(&omapl138_hawk_usb11_pdata, 1);
- return IRQ_HANDLED;
-}
-
static __init void omapl138_hawk_usb_init(void)
{
int ret;
- ret = davinci_cfg_reg_list(da850_hawk_usb11_pins);
- if (ret) {
- pr_warn("%s: USB 1.1 PinMux setup failed: %d\n", __func__, ret);
- return;
- }
-
ret = da8xx_register_usb20_phy_clk(false);
if (ret)
pr_warn("%s: USB 2.0 PHY CLK registration failed: %d\n",
@@ -266,34 +197,12 @@ static __init void omapl138_hawk_usb_init(void)
pr_warn("%s: USB PHY registration failed: %d\n",
__func__, ret);
- ret = gpio_request_one(DA850_USB1_VBUS_PIN,
- GPIOF_DIR_OUT, "USB1 VBUS");
- if (ret < 0) {
- pr_err("%s: failed to request GPIO for USB 1.1 port "
- "power control: %d\n", __func__, ret);
- return;
- }
-
- ret = gpio_request_one(DA850_USB1_OC_PIN,
- GPIOF_DIR_IN, "USB1 OC");
- if (ret < 0) {
- pr_err("%s: failed to request GPIO for USB 1.1 port "
- "over-current indicator: %d\n", __func__, ret);
- goto usb11_setup_oc_fail;
- }
-
- ret = da8xx_register_usb11(&omapl138_hawk_usb11_pdata);
- if (ret) {
- pr_warn("%s: USB 1.1 registration failed: %d\n", __func__, ret);
- goto usb11_setup_fail;
- }
+ ret = da8xx_register_usb11(NULL);
+ if (ret)
+ pr_warn("%s: USB 1.1 registration failed: %d\n",
+ __func__, ret);
return;
-
-usb11_setup_fail:
- gpio_free(DA850_USB1_OC_PIN);
-usb11_setup_oc_fail:
- gpio_free(DA850_USB1_VBUS_PIN);
}
static __init void omapl138_hawk_init(void)
--
2.10.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH 3/3] ARM: davinci: remove ohci platform usage
2016-11-08 18:57 [PATCH 0/3] [PART 2/4] ARM: davinci: OHCI: Use a regulator instead of callbacks Axel Haslam
2016-11-08 18:57 ` [PATCH 1/3] ARM: davinci: da830: Handle vbus with a regulator Axel Haslam
2016-11-08 18:57 ` [PATCH 2/3] ARM: davinci: hawk: Remove vbus and over current gpios Axel Haslam
@ 2016-11-08 18:57 ` Axel Haslam
2 siblings, 0 replies; 4+ messages in thread
From: Axel Haslam @ 2016-11-08 18:57 UTC (permalink / raw)
To: linux-arm-kernel
As all users of ohci platform data have been converted
to use a regulator, we dont need to pass platform
data to register the ohci device anymore.
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
---
arch/arm/mach-davinci/board-da830-evm.c | 2 +-
arch/arm/mach-davinci/board-omapl138-hawk.c | 2 +-
arch/arm/mach-davinci/include/mach/da8xx.h | 2 +-
arch/arm/mach-davinci/usb-da8xx.c | 3 +--
4 files changed, 4 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 16a401a..cb67885 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -129,7 +129,7 @@ static __init void da830_evm_usb_init(void)
if (ret)
pr_warn("fail to add ohci regulator\n");
- ret = da8xx_register_usb11(NULL);
+ ret = da8xx_register_usb11();
if (ret)
pr_warn("%s: USB 1.1 registration failed: %d\n", __func__, ret);
}
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index a252404..cbe7324 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -197,7 +197,7 @@ static __init void omapl138_hawk_usb_init(void)
pr_warn("%s: USB PHY registration failed: %d\n",
__func__, ret);
- ret = da8xx_register_usb11(NULL);
+ ret = da8xx_register_usb11();
if (ret)
pr_warn("%s: USB 1.1 registration failed: %d\n",
__func__, ret);
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 43322be..6096402 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -91,7 +91,7 @@ int da8xx_register_spi_bus(int instance, unsigned num_chipselect);
int da8xx_register_watchdog(void);
int da8xx_register_usb_phy(void);
int da8xx_register_usb20(unsigned mA, unsigned potpgt);
-int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata);
+int da8xx_register_usb11(void);
int da8xx_register_usb_refclkin(int rate);
int da8xx_register_usb20_phy_clk(bool use_usb_refclkin);
int da8xx_register_usb11_phy_clk(bool use_usb_refclkin);
diff --git a/arch/arm/mach-davinci/usb-da8xx.c b/arch/arm/mach-davinci/usb-da8xx.c
index c6feecf..4ea91bb 100644
--- a/arch/arm/mach-davinci/usb-da8xx.c
+++ b/arch/arm/mach-davinci/usb-da8xx.c
@@ -119,9 +119,8 @@ static struct platform_device da8xx_usb11_device = {
.resource = da8xx_usb11_resources,
};
-int __init da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata)
+int __init da8xx_register_usb11(void)
{
- da8xx_usb11_device.dev.platform_data = pdata;
return platform_device_register(&da8xx_usb11_device);
}
--
2.10.1
^ permalink raw reply related [flat|nested] 4+ messages in thread