public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
* [linux-sunxi][PATCH] clk: sunxi-ng: A31: Fix spdif clock register
@ 2016-12-20 10:44 codekipper at gmail.com
  2016-12-20 19:06 ` Maxime Ripard
  0 siblings, 1 reply; 2+ messages in thread
From: codekipper at gmail.com @ 2016-12-20 10:44 UTC (permalink / raw)
  To: linux-arm-kernel

From: Marcus Cooper <codekipper@gmail.com>

As the SPDIF was rarely documented on the earlier Allwinner SoCs
it was assumed that it had a similar clock register to the one
described in the H3 User Manual.

However this is not the case and it looks to shares the same setup
as the I2S clock registers.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
 drivers/clk/sunxi-ng/ccu-sun6i-a31.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun6i-a31.c b/drivers/clk/sunxi-ng/ccu-sun6i-a31.c
index fc75a335a7ce..4c9a920ff4ab 100644
--- a/drivers/clk/sunxi-ng/ccu-sun6i-a31.c
+++ b/drivers/clk/sunxi-ng/ccu-sun6i-a31.c
@@ -468,8 +468,8 @@ static SUNXI_CCU_MUX_WITH_GATE(daudio0_clk, "daudio0", daudio_parents,
 static SUNXI_CCU_MUX_WITH_GATE(daudio1_clk, "daudio1", daudio_parents,
 			       0x0b4, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
 
-static SUNXI_CCU_M_WITH_GATE(spdif_clk, "spdif", "pll-audio",
-			     0x0c0, 0, 4, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_MUX_WITH_GATE(spdif_clk, "spdif", daudio_parents,
+			       0x0c0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
 
 static SUNXI_CCU_GATE(usb_phy0_clk,	"usb-phy0",	"osc24M",
 		      0x0cc, BIT(8), 0);
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2016-12-20 19:06 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-12-20 10:44 [linux-sunxi][PATCH] clk: sunxi-ng: A31: Fix spdif clock register codekipper at gmail.com
2016-12-20 19:06 ` Maxime Ripard

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox