* [linux-sunxi] Re: [PATCH v3 04/10] clk: sunxi-ng: add support for Allwinner H5 SoC
[not found] <20170207000838.8UJeKISe@smtp2p.mail.yandex.net>
@ 2017-02-07 15:56 ` Maxime Ripard
0 siblings, 0 replies; only message in thread
From: Maxime Ripard @ 2017-02-07 15:56 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Jan 30, 2017 at 10:02:04PM +0800, Icenowy Zheng wrote:
> > >? static struct ccu_reset_map sunxi_h3_h5_ccu_resets[] = {
> > >? [RST_USB_PHY0] =? { 0x0cc, BIT(0) },
> > >? [RST_USB_PHY1] =? { 0x0cc, BIT(1) },
> > > @@ -791,6 +910,7 @@ static struct ccu_reset_map sunxi_h3_h5_ccu_resets[] = {
> > >? [RST_BUS_UART2] =? { 0x2d8, BIT(18) },
> > >? [RST_BUS_UART3] =? { 0x2d8, BIT(19) },
> > >? [RST_BUS_SCR0] =? { 0x2d8, BIT(20) },
> > > + [RST_BUS_SCR1] =? { 0x2d8, BIT(21) },
> >
> > That reset line is not valid on the H3.
>
> So I should split a H3 reset array and a H5 one?
Ideally, yes.
> (I modelled after ccu-sun5i.c, which shares one reset array)
They all share the same reset lines.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170207/b9b403ea/attachment.sig>
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2017-02-07 15:56 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20170207000838.8UJeKISe@smtp2p.mail.yandex.net>
2017-02-07 15:56 ` [linux-sunxi] Re: [PATCH v3 04/10] clk: sunxi-ng: add support for Allwinner H5 SoC Maxime Ripard
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox