public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: dongas86@gmail.com (Dong Aisheng)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/8] soc: imx: gpc: fix imx6sl gpc power domain regression
Date: Thu, 23 Mar 2017 08:47:39 +0800	[thread overview]
Message-ID: <20170323004739.GE16264@b29396-OptiPlex-7040> (raw)
In-Reply-To: <1490172370.2895.34.camel@pengutronix.de>

On Wed, Mar 22, 2017 at 09:46:10AM +0100, Lucas Stach wrote:
> Am Donnerstag, den 23.03.2017, 03:23 +0800 schrieb Dong Aisheng:
> > On Mon, Mar 20, 2017 at 10:26:14AM +0100, Lucas Stach wrote:
> > > Am Montag, den 20.03.2017, 14:15 +0800 schrieb Dong Aisheng:
> > > > Commit 721cabf6c660 ("soc: imx: move PGC handling to a new GPC driver")
> > > > broke the MX6SL GPC power domain support.
> > > > It always got the following error:
> > > > [    1.248364] imx-gpc 20dc000.gpc: could not find pgc DT node
> > > > This patch adds back the legecy support.
> > > 
> > > This patch removes a safeguard against abusing the old binding for new
> > > SoCs. Please leave this check in place and instead loosen the check to
> > > also allow the old i.MX6SL binding.
> > > 
> > 
> > Thanks for the reminder.
> > I found beside the checking, we probably also need some extra fix that
> > the current imx_gpc_old_dt_init() only supports two domains while the
> > driver formerly supports three for MX6SL.
> > 
> > And because the num_domains is defined by driver itself, no need check
> > in imx_gpc_old_dt_init() anymore.
> > 
> > The patch would be as follows:
> > diff --git a/drivers/soc/imx/gpc.c b/drivers/soc/imx/gpc.c
> > index 4885ec2..6a806a1 100644
> > --- a/drivers/soc/imx/gpc.c
> > +++ b/drivers/soc/imx/gpc.c
> > @@ -303,10 +303,13 @@ static struct genpd_onecell_data imx_gpc_onecell_data = {
> >  
> >  static int imx_gpc_old_dt_init(struct device *dev, struct regmap *regmap)
> >  {
> > +       const struct of_device_id *of_id =
> > +                       of_match_device(imx_gpc_dt_ids, dev);
> > +       const struct imx_gpc_dt_data *of_id_data = of_id->data;
> >         struct imx_pm_domain *domain;
> >         int i, ret;
> >  
> > -       for (i = 0; i < 2; i++) {
> > +       for (i = 0; i < of_id_data->num_domains; i++) {
> >                 domain = &imx_gpc_domains[i];
> >                 domain->regmap = regmap;
> >                 domain->ipg_rate_mhz = 66;
> > @@ -324,7 +327,7 @@ static int imx_gpc_old_dt_init(struct device *dev, struct regmap *regmap)
> >                 }
> >         }
> >  
> > -       for (i = 0; i < 2; i++)
> > +       for (i = 0; i < of_id_data->num_domains; i++)
> >                 pm_genpd_init(&imx_gpc_domains[i].base, NULL, false);
> >  
> >         if (IS_ENABLED(CONFIG_PM_GENERIC_DOMAINS)) {
> > @@ -337,7 +340,7 @@ static int imx_gpc_old_dt_init(struct device *dev, struct regmap *regmap)
> >         return 0;
> >  
> >  genpd_err:
> > -       for (i = 0; i < 2; i++)
> > +       for (i = 0; i < of_id_data->num_domains; i++)
> >                 pm_genpd_remove(&imx_gpc_domains[i].base);
> >         imx_pgc_put_clocks(&imx_gpc_domains[1]);
> >  clk_err:
> > 
> > Do you think it's ok?
> > 
> I don't like the redundant of_match_id. Please just pass num_domains as
> a parameter to imx_gpc_old_dt_init(). Otherwise this looks good.
> 

Yes, of course, will update it.

Thanks for the suggestion.

Regards
Dong Aisheng

> Regards,
> Lucas
> 

  reply	other threads:[~2017-03-23  0:47 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-20  6:15 [PATCH 0/8] soc: imx: gpc: fixes and clean up Dong Aisheng
2017-03-20  6:15 ` [PATCH 1/8] soc: imx: gpc: fix gpc clk get error handling Dong Aisheng
2017-03-20  8:05   ` Shawn Guo
2017-03-22 18:33     ` Dong Aisheng
2017-03-22  6:38       ` Shawn Guo
2017-03-20  6:15 ` [PATCH 2/8] soc: imx: gpc: fix the wrong using of regmap cache Dong Aisheng
2017-03-20  9:38   ` Lucas Stach
2017-03-22 18:53     ` Dong Aisheng
2017-03-22  8:43       ` Lucas Stach
2017-03-20  6:15 ` [PATCH 3/8] soc: imx: gpc: fix domain_index sanity check issue Dong Aisheng
2017-03-20  9:40   ` Lucas Stach
2017-03-20  6:15 ` [PATCH 4/8] soc: imx: gpc: fix imx6sl gpc power domain regression Dong Aisheng
2017-03-20  9:26   ` Lucas Stach
2017-03-22 19:23     ` Dong Aisheng
2017-03-22  8:46       ` Lucas Stach
2017-03-23  0:47         ` Dong Aisheng [this message]
2017-03-20  6:15 ` [PATCH 5/8] soc: imx: gpc: fix comment when power up domain Dong Aisheng
2017-03-20  9:41   ` Lucas Stach
2017-03-20  6:15 ` [PATCH 6/8] soc: imx: gpc: keep PGC_X_CTRL name align with reference manual Dong Aisheng
2017-03-20  9:42   ` Lucas Stach
2017-03-20  6:15 ` [PATCH 7/8] dt-bindings: imx-gpc: correct the DOMAIN_INDEX using Dong Aisheng
2017-03-20  9:43   ` Lucas Stach
2017-03-20  6:15 ` [PATCH 8/8] soc: imx: gpc: remove unnecessary readable_reg callback Dong Aisheng
2017-03-20  9:43   ` Lucas Stach
2017-03-22 19:25     ` Dong Aisheng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170323004739.GE16264@b29396-OptiPlex-7040 \
    --to=dongas86@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox