[PATCH v2 0/4] ARM: dts: keystone: Add support for new K2G evm

[PATCH v2 0/4] ARM: dts: keystone: Add support for new K2G evm

[Franklin S Cooper Jr]

This patchset adds support for new K2G Industrial Communication Engine
evm. For now only a bare minimal dts which will allow ram boot. Additional
peripherals will be added when base K2G SoC patches are upstreamed allowing
peripherals to be enabled.

Version 2 changes:
Make various tweaks to allow unit address to be added to memory node.

Franklin S Cooper Jr (4):
  ARM: dts: keystone-k2g: Remove skeleton.dtsi
  ARM: dts: k2g-evm: Add unit address to memory node
  ARM: keystone: Create new binding for K2G ICE evm
  ARM: dts: keystone: Add minimum support for K2G ICE evm

 .../devicetree/bindings/arm/keystone/keystone.txt  |  3 ++
 arch/arm/boot/dts/Makefile                         |  3 +-
 arch/arm/boot/dts/keystone-k2g-evm.dts             |  2 +-
 arch/arm/boot/dts/keystone-k2g-ice.dts             | 35 ++++++++++++++++++++++
 arch/arm/boot/dts/keystone-k2g.dtsi                |  3 +-
 5 files changed, 43 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/boot/dts/keystone-k2g-ice.dts

-- 
2.10.0

[PATCH v2 1/4] ARM: dts: keystone-k2g: Remove skeleton.dtsi

[Franklin S Cooper Jr]

Adding the unit address to the memory node was causing the below error:
Warning (reg_format): "reg" property in /memory has invalid length
(8 bytes) (#address-cells == 2, #size-cells == 2)

Further debugging showed that this was due to the memory node added by
default to skeleton.dtsi which was being included in keystone-k2g.dtsi.
Adding a missing node was all that was needed to remove this deprecated
dtsi file from the SoC dtsi. With skeleton.dtsi removed the dtc compiler
no longer complained about including the unit address for the memory node.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
---
 arch/arm/boot/dts/keystone-k2g.dtsi | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index f59567f..a789f75 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -15,7 +15,6 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/keystone.h>
-#include "skeleton.dtsi"
 
 / {
 	compatible = "ti,k2g","ti,keystone";
@@ -24,6 +23,8 @@
 	#size-cells = <2>;
 	interrupt-parent = <&gic>;
 
+	chosen { };
+
 	aliases {
 		serial0 = &uart0;
 	};
-- 
2.10.0

[PATCH v2 2/4] ARM: dts: k2g-evm: Add unit address to memory node

[Franklin S Cooper Jr]

With the new Keystone 2 Industrial Communication EVM adding the
unit address to the memory node it made sense to add it for this board
also.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
---
 arch/arm/boot/dts/keystone-k2g-evm.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
index 692fcbb..61883cb 100644
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -20,7 +20,7 @@
 	compatible =  "ti,k2g-evm", "ti,k2g", "ti,keystone";
 	model = "Texas Instruments K2G General Purpose EVM";
 
-	memory {
+	memory at 800000000 {
 		device_type = "memory";
 		reg = <0x00000008 0x00000000 0x00000000 0x80000000>;
 	};
-- 
2.10.0

[PATCH v2 3/4] ARM: keystone: Create new binding for K2G ICE evm

[Franklin S Cooper Jr]

Add a new binding for the new K2G Industrial Communication Engine evm.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/arm/keystone/keystone.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/keystone/keystone.txt b/Documentation/devicetree/bindings/arm/keystone/keystone.txt
index 48f6703..f310bad 100644
--- a/Documentation/devicetree/bindings/arm/keystone/keystone.txt
+++ b/Documentation/devicetree/bindings/arm/keystone/keystone.txt
@@ -37,3 +37,6 @@ Boards:
 
 -  K2G EVM
    compatible = "ti,k2g-evm", "ti,k2g", "ti-keystone"
+
+-  K2G Industrial Communication Engine EVM
+   compatible = "ti,k2g-ice", "ti,k2g", "ti-keystone"
-- 
2.10.0

[PATCH v2 4/4] ARM: dts: keystone: Add minimum support for K2G ICE evm

[Franklin S Cooper Jr]

Add barebones dts support for TI's K2G Industrial Communication Engine evm.
This dts allows the board to boot using a ram based filesystem.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
---
 arch/arm/boot/dts/Makefile             |  3 ++-
 arch/arm/boot/dts/keystone-k2g-ice.dts | 35 ++++++++++++++++++++++++++++++++++
 2 files changed, 37 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/keystone-k2g-ice.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 0118084..01a98f1 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -193,7 +193,8 @@ dtb-$(CONFIG_ARCH_KEYSTONE) += \
 	keystone-k2hk-evm.dtb \
 	keystone-k2l-evm.dtb \
 	keystone-k2e-evm.dtb \
-	keystone-k2g-evm.dtb
+	keystone-k2g-evm.dtb \
+	keystone-k2g-ice.dtb
 dtb-$(CONFIG_MACH_KIRKWOOD) += \
 	kirkwood-b3.dtb \
 	kirkwood-blackarmor-nas220.dtb \
diff --git a/arch/arm/boot/dts/keystone-k2g-ice.dts b/arch/arm/boot/dts/keystone-k2g-ice.dts
new file mode 100644
index 0000000..d820d37
--- /dev/null
+++ b/arch/arm/boot/dts/keystone-k2g-ice.dts
@@ -0,0 +1,35 @@
+/*
+ * Device Tree Source for K2G Industrial Communication Engine EVM
+ *
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+/dts-v1/;
+
+#include "keystone-k2g.dtsi"
+
+/ {
+	compatible = "ti,k2g-ice", "ti,k2g", "ti,keystone";
+	model = "Texas Instruments K2G Industrial Communication EVM";
+
+	memory at 800000000 {
+		device_type = "memory";
+		reg = <0x00000008 0x00000000 0x00000000 0x20000000>;
+	};
+};
+
+&k2g_pinctrl {
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x11cc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			K2G_CORE_IOPAD(0x11d0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
-- 
2.10.0

[PATCH v2 0/4] ARM: dts: keystone: Add support for new K2G evm

[Franklin S Cooper Jr]

On 04/24/2017 03:22 PM, Franklin S Cooper Jr wrote:
> This patchset adds support for new K2G Industrial Communication Engine
> evm. For now only a bare minimal dts which will allow ram boot. Additional
> peripherals will be added when base K2G SoC patches are upstreamed allowing
> peripherals to be enabled.
> 
> Version 2 changes:
> Make various tweaks to allow unit address to be added to memory node.
> 
> Franklin S Cooper Jr (4):
>   ARM: dts: keystone-k2g: Remove skeleton.dtsi
>   ARM: dts: k2g-evm: Add unit address to memory node
>   ARM: keystone: Create new binding for K2G ICE evm
>   ARM: dts: keystone: Add minimum support for K2G ICE evm
> 

ping
>  .../devicetree/bindings/arm/keystone/keystone.txt  |  3 ++
>  arch/arm/boot/dts/Makefile                         |  3 +-
>  arch/arm/boot/dts/keystone-k2g-evm.dts             |  2 +-
>  arch/arm/boot/dts/keystone-k2g-ice.dts             | 35 ++++++++++++++++++++++
>  arch/arm/boot/dts/keystone-k2g.dtsi                |  3 +-
>  5 files changed, 43 insertions(+), 3 deletions(-)
>  create mode 100644 arch/arm/boot/dts/keystone-k2g-ice.dts
> 

[PATCH v2 0/4] ARM: dts: keystone: Add support for new K2G evm

[Santosh Shilimkar]

On 4/24/2017 1:22 PM, Franklin S Cooper Jr wrote:
> This patchset adds support for new K2G Industrial Communication Engine
> evm. For now only a bare minimal dts which will allow ram boot. Additional
> peripherals will be added when base K2G SoC patches are upstreamed allowing
> peripherals to be enabled.
>
> Version 2 changes:
> Make various tweaks to allow unit address to be added to memory node.
>
> Franklin S Cooper Jr (4):
>   ARM: dts: keystone-k2g: Remove skeleton.dtsi
>   ARM: dts: k2g-evm: Add unit address to memory node
>   ARM: keystone: Create new binding for K2G ICE evm
>   ARM: dts: keystone: Add minimum support for K2G ICE evm
>
Will pick this up for next merge window. Thanks !!

Regards,
Santosh

[PATCH v2 0/4] ARM: dts: keystone: Add support for new K2G evm

[santosh.shilimkar at oracle.com]

On 5/10/17 9:08 AM, Santosh Shilimkar wrote:
> On 4/24/2017 1:22 PM, Franklin S Cooper Jr wrote:
>> This patchset adds support for new K2G Industrial Communication Engine
>> evm. For now only a bare minimal dts which will allow ram boot.
>> Additional
>> peripherals will be added when base K2G SoC patches are upstreamed
>> allowing
>> peripherals to be enabled.
>>
>> Version 2 changes:
>> Make various tweaks to allow unit address to be added to memory node.
>>
>> Franklin S Cooper Jr (4):
>>   ARM: dts: keystone-k2g: Remove skeleton.dtsi
>>   ARM: dts: k2g-evm: Add unit address to memory node
>>   ARM: keystone: Create new binding for K2G ICE evm
>>   ARM: dts: keystone: Add minimum support for K2G ICE evm
>>
> Will pick this up for next merge window. Thanks !!
>
Applied to 'for_4.13/keystone_dts'. Should show up in next soon.

Regards,
Santosh