[PATCH] ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v6)

[PATCH] ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v6)

[Eric Anholt]

Raspbian and Fedora have decided to support the Pi3 in 32-bit mode for
now, so it's useful to be able to test that mode on an upstream
kernel.  It's also been useful for me to use the same board for 32-bit
and 64-bit development.

Signed-off-by: Eric Anholt <eric@anholt.net>
---
 arch/arm/boot/dts/Makefile            | 1 +
 arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 1 +
 2 files changed, 2 insertions(+)
 create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3-b.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 011808490fed..eded842d9978 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
 	bcm2835-rpi-b-plus.dtb \
 	bcm2835-rpi-a-plus.dtb \
 	bcm2836-rpi-2-b.dtb \
+	bcm2837-rpi-3-b.dtb \
 	bcm2835-rpi-zero.dtb
 dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm4708-asus-rt-ac56u.dtb \
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
new file mode 100644
index 000000000000..c72a27d908b6
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
@@ -0,0 +1 @@
+#include "arm64/broadcom/bcm2837-rpi-3-b.dts"
-- 
2.11.0

[PATCH] ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v6)

[Olof Johansson]

Hi,

On Tue, Apr 25, 2017 at 9:45 AM, Eric Anholt <eric@anholt.net> wrote:
> Raspbian and Fedora have decided to support the Pi3 in 32-bit mode for
> now, so it's useful to be able to test that mode on an upstream
> kernel.  It's also been useful for me to use the same board for 32-bit
> and 64-bit development.
>
> Signed-off-by: Eric Anholt <eric@anholt.net>

Acked-by: Olof Johansson <olof@lixom.net>


-Olof