* [PATCH v2 1/2] ARM: sun8i: a83t: Drop leading zeroes from device node addresses
2017-05-01 3:14 [PATCH v2 0/2] ARM: sun8i: a83t: device tree cleanup Chen-Yu Tsai
@ 2017-05-01 3:14 ` Chen-Yu Tsai
2017-05-01 3:14 ` [PATCH v2 2/2] ARM: sun8i: a83t: Replace underscores with hyphens in pinmux node names Chen-Yu Tsai
2017-05-01 17:31 ` [PATCH v2 0/2] ARM: sun8i: a83t: device tree cleanup Maxime Ripard
2 siblings, 0 replies; 4+ messages in thread
From: Chen-Yu Tsai @ 2017-05-01 3:14 UTC (permalink / raw)
To: linux-arm-kernel
Kbuild now complains about leading zeroes in the address portion of
device node names.
Get rid of them all, except for the uart device node. U-boot currently
hard codes the device node path. We can remove the leading zero for
the uart once we teach U-boot to use the aliases or stdout-path
property.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun8i-a83t.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 5f5c10c04dd3..aecde8be53bc 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -162,7 +162,7 @@
#size-cells = <1>;
ranges;
- pio: pinctrl at 01c20800 {
+ pio: pinctrl at 1c20800 {
compatible = "allwinner,sun8i-a83t-pinctrl";
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
@@ -193,7 +193,7 @@
};
};
- timer at 01c20c00 {
+ timer at 1c20c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0xa0>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
@@ -201,7 +201,7 @@
clocks = <&osc24M>;
};
- watchdog at 01c20ca0 {
+ watchdog at 1c20ca0 {
compatible = "allwinner,sun6i-a31-wdt";
reg = <0x01c20ca0 0x20>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
@@ -218,7 +218,7 @@
status = "disabled";
};
- gic: interrupt-controller at 01c81000 {
+ gic: interrupt-controller at 1c81000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x2000>,
--
2.11.0
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH v2 2/2] ARM: sun8i: a83t: Replace underscores with hyphens in pinmux node names
2017-05-01 3:14 [PATCH v2 0/2] ARM: sun8i: a83t: device tree cleanup Chen-Yu Tsai
2017-05-01 3:14 ` [PATCH v2 1/2] ARM: sun8i: a83t: Drop leading zeroes from device node addresses Chen-Yu Tsai
@ 2017-05-01 3:14 ` Chen-Yu Tsai
2017-05-01 17:31 ` [PATCH v2 0/2] ARM: sun8i: a83t: device tree cleanup Maxime Ripard
2 siblings, 0 replies; 4+ messages in thread
From: Chen-Yu Tsai @ 2017-05-01 3:14 UTC (permalink / raw)
To: linux-arm-kernel
We should use hyphens and not underscores in device node names.
Replace the ones that were just added.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun8i-a83t.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index aecde8be53bc..c0a1e4f74b89 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -174,7 +174,7 @@
#interrupt-cells = <3>;
#gpio-cells = <3>;
- mmc0_pins: mmc0_pins {
+ mmc0_pins: mmc0-pins {
pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
function = "mmc0";
@@ -182,12 +182,12 @@
bias-pull-up;
};
- uart0_pb_pins: uart0_pb_pins {
+ uart0_pb_pins: uart0-pb-pins {
pins = "PB9", "PB10";
function = "uart0";
};
- uart0_pf_pins: uart0_pf_pins {
+ uart0_pf_pins: uart0-pf-pins {
pins = "PF2", "PF4";
function = "uart0";
};
--
2.11.0
^ permalink raw reply related [flat|nested] 4+ messages in thread