* [PATCH 01/11] arm64: dts: renesas: r8a7795: Move nodes which have no reg property out of bus
2017-12-22 10:29 [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.16 Simon Horman
@ 2017-12-22 10:29 ` Simon Horman
2017-12-22 10:29 ` [PATCH 02/11] arm64: dts: renesas: salvator-common: Add EthernetAVB PHY reset Simon Horman
` (10 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Simon Horman @ 2017-12-22 10:29 UTC (permalink / raw)
To: linux-arm-kernel
Move pmu_a5[73], timer and thermal-zones nodes from soc node to root node.
The nodes that have been moved do not have any register properties and thus
shouldn't be placed on the bus.
This problem is flagged by the compiler as follows:
$ make
...
DTC arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dtb
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dtb: Warning (simple_bus_reg): Node /soc/pmu_a57 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dtb: Warning (simple_bus_reg): Node /soc/pmu_a53 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property
DTC arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dtb
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dtb: Warning (simple_bus_reg): Node /soc/pmu_a57 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dtb: Warning (simple_bus_reg): Node /soc/pmu_a53 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property
DTC arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dtb
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dtb: Warning (simple_bus_reg): Node /soc/pmu_a57 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dtb: Warning (simple_bus_reg): Node /soc/pmu_a53 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property
DTC arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dtb
arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dtb: Warning (simple_bus_reg): Node /soc/pmu_a57 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dtb: Warning (simple_bus_reg): Node /soc/pmu_a53 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property
DTC arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dtb
arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dtb: Warning (simple_bus_reg): Node /soc/pmu_a57 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dtb: Warning (simple_bus_reg): Node /soc/pmu_a53 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property
DTC arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dtb
arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dtb: Warning (simple_bus_reg): Node /soc/pmu_a57 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dtb: Warning (simple_bus_reg): Node /soc/pmu_a53 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property
DTC arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dtb
arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dtb: Warning (simple_bus_reg): Node /soc/pmu_a57 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dtb: Warning (simple_bus_reg): Node /soc/pmu_a53 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 138 ++++++++++++++++---------------
1 file changed, 71 insertions(+), 67 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index 6db4f10376a1..a851c88e1e04 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -184,6 +184,30 @@
clock-frequency = <0>;
};
+ pmu_a57 {
+ compatible = "arm,cortex-a57-pmu";
+ interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&a57_0>,
+ <&a57_1>,
+ <&a57_2>,
+ <&a57_3>;
+ };
+
+ pmu_a53 {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&a53_0>,
+ <&a53_1>,
+ <&a53_2>,
+ <&a53_3>;
+ };
+
soc: soc {
compatible = "simple-bus";
interrupt-parent = <&gic>;
@@ -338,42 +362,6 @@
resets = <&cpg 905>;
};
- pmu_a57 {
- compatible = "arm,cortex-a57-pmu";
- interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&a57_0>,
- <&a57_1>,
- <&a57_2>,
- <&a57_3>;
- };
-
- pmu_a53 {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&a53_0>,
- <&a53_1>,
- <&a53_2>,
- <&a53_3>;
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13
- (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14
- (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11
- (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10
- (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
cpg: clock-controller at e6150000 {
compatible = "renesas,r8a7795-cpg-mssr";
reg = <0 0xe6150000 0 0x1000>;
@@ -2331,47 +2319,63 @@
#thermal-sensor-cells = <1>;
status = "okay";
};
+ };
- thermal-zones {
- sensor_thermal1: sensor-thermal1 {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
- thermal-sensors = <&tsc 0>;
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts-extended = <&gic GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(8) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(8) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(8) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(8) |
+ IRQ_TYPE_LEVEL_LOW)>;
+ };
- trips {
- sensor1_crit: sensor1-crit {
- temperature = <120000>;
- hysteresis = <2000>;
- type = "critical";
- };
+ thermal-zones {
+ sensor_thermal1: sensor-thermal1 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 0>;
+
+ trips {
+ sensor1_crit: sensor1-crit {
+ temperature = <120000>;
+ hysteresis = <2000>;
+ type = "critical";
};
};
+ };
- sensor_thermal2: sensor-thermal2 {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
- thermal-sensors = <&tsc 1>;
+ sensor_thermal2: sensor-thermal2 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 1>;
- trips {
- sensor2_crit: sensor2-crit {
- temperature = <120000>;
- hysteresis = <2000>;
- type = "critical";
- };
+ trips {
+ sensor2_crit: sensor2-crit {
+ temperature = <120000>;
+ hysteresis = <2000>;
+ type = "critical";
};
};
+ };
- sensor_thermal3: sensor-thermal3 {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
- thermal-sensors = <&tsc 2>;
+ sensor_thermal3: sensor-thermal3 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 2>;
- trips {
- sensor3_crit: sensor3-crit {
- temperature = <120000>;
- hysteresis = <2000>;
- type = "critical";
- };
+ trips {
+ sensor3_crit: sensor3-crit {
+ temperature = <120000>;
+ hysteresis = <2000>;
+ type = "critical";
};
};
};
--
2.11.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH 02/11] arm64: dts: renesas: salvator-common: Add EthernetAVB PHY reset
2017-12-22 10:29 [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.16 Simon Horman
2017-12-22 10:29 ` [PATCH 01/11] arm64: dts: renesas: r8a7795: Move nodes which have no reg property out of bus Simon Horman
@ 2017-12-22 10:29 ` Simon Horman
2017-12-22 10:29 ` [PATCH 03/11] arm64: dts: renesas: ulcb: " Simon Horman
` (9 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Simon Horman @ 2017-12-22 10:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Describe the GPIO used to reset the Ethernet PHY for EthernetAVB.
This allows the driver to reset the PHY during probe and after system
resume.
This fixes Ethernet operation after resume from s2ram on Salvator-XS,
where the enable pin of the regulator providing PHY power is connected
to PRESETn, and PSCI powers down the SoC during system suspend.
On Salvator-X, the enable pin is always pulled high, but the driver may
still need to reset the PHY if this wasn't done by the bootloader
before.
Inspired by patches in the BSP for the individual Salvator-X/XS boards
by Kazuya Mizuguchi.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/salvator-common.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index b9505a65a793..4e800e933944 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -264,6 +264,7 @@
reg = <0>;
interrupt-parent = <&gpio2>;
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
};
};
--
2.11.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH 03/11] arm64: dts: renesas: ulcb: Add EthernetAVB PHY reset
2017-12-22 10:29 [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.16 Simon Horman
2017-12-22 10:29 ` [PATCH 01/11] arm64: dts: renesas: r8a7795: Move nodes which have no reg property out of bus Simon Horman
2017-12-22 10:29 ` [PATCH 02/11] arm64: dts: renesas: salvator-common: Add EthernetAVB PHY reset Simon Horman
@ 2017-12-22 10:29 ` Simon Horman
2017-12-22 10:29 ` [PATCH 04/11] arm64: dts: renesas: r8a7795: sort subnodes of root node alphabetically Simon Horman
` (8 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Simon Horman @ 2017-12-22 10:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Describe the GPIO used to reset the Ethernet PHY for EthernetAVB.
This allows the driver to reset the PHY during probe and after system
resume.
On ULCB, the enable pin of the regulator providing PHY power is always
pulled high, but the driver may still need to reset the PHY if this
wasn't done by the bootloader before.
Inspired by patches in the BSP for the individual Salvator-X/XS boards
by Kazuya Mizuguchi.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/ulcb.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
index 0d85b315ce71..be91016e0b48 100644
--- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -154,6 +154,7 @@
reg = <0>;
interrupt-parent = <&gpio2>;
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
};
};
--
2.11.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH 04/11] arm64: dts: renesas: r8a7795: sort subnodes of root node alphabetically
2017-12-22 10:29 [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.16 Simon Horman
` (2 preceding siblings ...)
2017-12-22 10:29 ` [PATCH 03/11] arm64: dts: renesas: ulcb: " Simon Horman
@ 2017-12-22 10:29 ` Simon Horman
2017-12-22 10:29 ` [PATCH 05/11] arm64: dts: renesas: r8a7796: " Simon Horman
` (7 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Simon Horman @ 2017-12-22 10:29 UTC (permalink / raw)
To: linux-arm-kernel
Sort root sub-nodes alphabetically for allow for easier maintenance
of this file.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index a851c88e1e04..62dfc7781cc1 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -30,11 +30,6 @@
i2c7 = &i2c_dvfs;
};
- psci {
- compatible = "arm,psci-1.0", "arm,psci-0.2";
- method = "smc";
- };
-
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -208,6 +203,11 @@
<&a53_3>;
};
+ psci {
+ compatible = "arm,psci-1.0", "arm,psci-0.2";
+ method = "smc";
+ };
+
soc: soc {
compatible = "simple-bus";
interrupt-parent = <&gic>;
--
2.11.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH 05/11] arm64: dts: renesas: r8a7796: sort subnodes of root node alphabetically
2017-12-22 10:29 [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.16 Simon Horman
` (3 preceding siblings ...)
2017-12-22 10:29 ` [PATCH 04/11] arm64: dts: renesas: r8a7795: sort subnodes of root node alphabetically Simon Horman
@ 2017-12-22 10:29 ` Simon Horman
2017-12-22 10:29 ` [PATCH 06/11] arm64: dts: renesas: r8a7796: move nodes which have no reg property out of bus Simon Horman
` (6 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Simon Horman @ 2017-12-22 10:29 UTC (permalink / raw)
To: linux-arm-kernel
Sort root sub-nodes alphabetically for allow for easier maintenance
of this file.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm64/boot/dts/renesas/r8a7796.dtsi | 66 ++++++++++++++++----------------
1 file changed, 33 insertions(+), 33 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index cc0cca7c0494..c1b0d0344329 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -30,9 +30,34 @@
i2c7 = &i2c_dvfs;
};
- psci {
- compatible = "arm,psci-1.0", "arm,psci-0.2";
- method = "smc";
+ /*
+ * The external audio clocks are configured as 0 Hz fixed frequency
+ * clocks by default.
+ * Boards that provide audio clocks should override them.
+ */
+ audio_clk_a: audio_clk_a {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ audio_clk_b: audio_clk_b {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ audio_clk_c: audio_clk_c {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ /* External CAN clock - to be overridden by boards that provide it */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
};
cpus {
@@ -122,34 +147,16 @@
clock-frequency = <0>;
};
- /*
- * The external audio clocks are configured as 0 Hz fixed frequency
- * clocks by default.
- * Boards that provide audio clocks should override them.
- */
- audio_clk_a: audio_clk_a {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
-
- audio_clk_b: audio_clk_b {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
-
- audio_clk_c: audio_clk_c {
+ /* External PCIe clock - can be overridden by the board */
+ pcie_bus_clk: pcie_bus {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
- /* External CAN clock - to be overridden by boards that provide it */
- can_clk: can {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
+ psci {
+ compatible = "arm,psci-1.0", "arm,psci-0.2";
+ method = "smc";
};
/* External SCIF clock - to be overridden by boards that provide it */
@@ -159,13 +166,6 @@
clock-frequency = <0>;
};
- /* External PCIe clock - can be overridden by the board */
- pcie_bus_clk: pcie_bus {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
-
soc {
compatible = "simple-bus";
interrupt-parent = <&gic>;
--
2.11.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH 06/11] arm64: dts: renesas: r8a7796: move nodes which have no reg property out of bus
2017-12-22 10:29 [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.16 Simon Horman
` (4 preceding siblings ...)
2017-12-22 10:29 ` [PATCH 05/11] arm64: dts: renesas: r8a7796: " Simon Horman
@ 2017-12-22 10:29 ` Simon Horman
2017-12-22 10:29 ` [PATCH 07/11] arm64: dts: renesas: r8a7796: add reg properties to pciec[01] nodes Simon Horman
` (5 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Simon Horman @ 2017-12-22 10:29 UTC (permalink / raw)
To: linux-arm-kernel
Move pmu_a5[73], timer and thermal-zones nodes from soc node to root node.
The nodes that have been moved do not have any register properties and thus
shouldn't be placed on the bus.
This problem is flagged by the compiler as follows:
$ make
...
DTC arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dtb
...
arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dtb: Warning (simple_bus_reg): Node /soc/pmu_a57 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dtb: Warning (simple_bus_reg): Node /soc/pmu_a53 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property
...
DTC arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dtb
...
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dtb: Warning (simple_bus_reg): Node /soc/pmu_a57 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dtb: Warning (simple_bus_reg): Node /soc/pmu_a53 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property
...
DTC arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dtb
...
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dtb: Warning (simple_bus_reg): Node /soc/pmu_a57 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dtb: Warning (simple_bus_reg): Node /soc/pmu_a53 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property
...
DTC arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dtb
...
arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dtb: Warning (simple_bus_reg): Node /soc/pmu_a57 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dtb: Warning (simple_bus_reg): Node /soc/pmu_a53 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property
...
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796.dtsi | 144 +++++++++++++++----------------
1 file changed, 68 insertions(+), 76 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index c1b0d0344329..49c5893f8a35 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -154,6 +154,22 @@
clock-frequency = <0>;
};
+ pmu_a57 {
+ compatible = "arm,cortex-a57-pmu";
+ interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&a57_0>, <&a57_1>;
+ };
+
+ pmu_a53 {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>;
+ };
+
psci {
compatible = "arm,psci-1.0", "arm,psci-0.2";
method = "smc";
@@ -190,18 +206,6 @@
resets = <&cpg 408>;
};
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13
- (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14
- (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11
- (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10
- (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
wdt0: watchdog at e6020000 {
compatible = "renesas,r8a7796-wdt",
"renesas,rcar-gen3-wdt";
@@ -337,26 +341,6 @@
reg = <0 0xe6060000 0 0x50c>;
};
- pmu_a57 {
- compatible = "arm,cortex-a57-pmu";
- interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&a57_0>,
- <&a57_1>;
- };
-
- pmu_a53 {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&a53_0>,
- <&a53_1>,
- <&a53_2>,
- <&a53_3>;
- };
-
ipmmu_vi0: mmu at febd0000 {
compatible = "renesas,ipmmu-r8a7796";
reg = <0 0xfebd0000 0 0x1000>;
@@ -1577,50 +1561,6 @@
status = "okay";
};
- thermal-zones {
- sensor_thermal1: sensor-thermal1 {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
- thermal-sensors = <&tsc 0>;
-
- trips {
- sensor1_crit: sensor1-crit {
- temperature = <120000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
-
- sensor_thermal2: sensor-thermal2 {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
- thermal-sensors = <&tsc 1>;
-
- trips {
- sensor2_crit: sensor2-crit {
- temperature = <120000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
-
- sensor_thermal3: sensor-thermal3 {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
- thermal-sensors = <&tsc 2>;
-
- trips {
- sensor3_crit: sensor3-crit {
- temperature = <120000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
- };
-
rcar_sound: sound at ec500000 {
/*
* #sound-dai-cells is required
@@ -2027,4 +1967,56 @@
resets = <&cpg 822>;
};
};
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ thermal-zones {
+ sensor_thermal1: sensor-thermal1 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 0>;
+
+ trips {
+ sensor1_crit: sensor1-crit {
+ temperature = <120000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ sensor_thermal2: sensor-thermal2 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 1>;
+
+ trips {
+ sensor2_crit: sensor2-crit {
+ temperature = <120000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ sensor_thermal3: sensor-thermal3 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 2>;
+
+ trips {
+ sensor3_crit: sensor3-crit {
+ temperature = <120000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
};
--
2.11.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH 07/11] arm64: dts: renesas: r8a7796: add reg properties to pciec[01] nodes
2017-12-22 10:29 [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.16 Simon Horman
` (5 preceding siblings ...)
2017-12-22 10:29 ` [PATCH 06/11] arm64: dts: renesas: r8a7796: move nodes which have no reg property out of bus Simon Horman
@ 2017-12-22 10:29 ` Simon Horman
2017-12-22 10:29 ` [PATCH 08/11] arm64: dts: renesas: r8a7795: add usb3_phy node Simon Horman
` (4 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Simon Horman @ 2017-12-22 10:29 UTC (permalink / raw)
To: linux-arm-kernel
Add reg properties to pciec[01] placeholder nodes
This is to stop the compiler complaining as follows:
$ make
...
DTC arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dtb
arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dtb: Warning (unit_address_vs_reg): Node /soc/pcie at fe000000 has a unit name, but no reg property
arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dtb: Warning (unit_address_vs_reg): Node /soc/pcie at ee800000 has a unit name, but no reg property
arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dtb: Warning (simple_bus_reg): Node /soc/pcie at fe000000 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dtb: Warning (simple_bus_reg): Node /soc/pcie at ee800000 missing or empty reg/ranges property
DTC arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dtb
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dtb: Warning (unit_address_vs_reg): Node /soc/pcie at fe000000 has a unit name, but no reg property
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dtb: Warning (unit_address_vs_reg): Node /soc/pcie at ee800000 has a unit name, but no reg property
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dtb: Warning (simple_bus_reg): Node /soc/pcie at fe000000 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dtb: Warning (simple_bus_reg): Node /soc/pcie at ee800000 missing or empty reg/ranges property
DTC arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dtb
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dtb: Warning (unit_address_vs_reg): Node /soc/pcie at fe000000 has a unit name, but no reg property
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dtb: Warning (unit_address_vs_reg): Node /soc/pcie at ee800000 has a unit name, but no reg property
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dtb: Warning (simple_bus_reg): Node /soc/pcie at fe000000 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dtb: Warning (simple_bus_reg): Node /soc/pcie at ee800000 missing or empty reg/ranges property
DTC arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dtb
arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dtb: Warning (unit_address_vs_reg): Node /soc/pcie at fe000000 has a unit name, but no reg property
arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dtb: Warning (unit_address_vs_reg): Node /soc/pcie at ee800000 has a unit name, but no reg property
arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dtb: Warning (simple_bus_reg): Node /soc/pcie at fe000000 missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dtb: Warning (simple_bus_reg): Node /soc/pcie at ee800000 missing or empty reg/ranges property
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm64/boot/dts/renesas/r8a7796.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index 49c5893f8a35..a339047acdc7 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -1758,10 +1758,12 @@
};
pciec0: pcie at fe000000 {
+ reg = <0 0xfe000000 0 0x80000>;
/* placeholder */
};
pciec1: pcie at ee800000 {
+ reg = <0 0xee800000 0 0x80000>;
/* placeholder */
};
--
2.11.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH 08/11] arm64: dts: renesas: r8a7795: add usb3_phy node
2017-12-22 10:29 [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.16 Simon Horman
` (6 preceding siblings ...)
2017-12-22 10:29 ` [PATCH 07/11] arm64: dts: renesas: r8a7796: add reg properties to pciec[01] nodes Simon Horman
@ 2017-12-22 10:29 ` Simon Horman
2017-12-22 10:29 ` [PATCH 09/11] arm64: dts: renesas: r8a7796: " Simon Horman
` (3 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Simon Horman @ 2017-12-22 10:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
This patch adds USB3.0 PHY node for r8a7795.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index 62dfc7781cc1..d12df6f2ff09 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -1631,6 +1631,19 @@
iommus = <&ipmmu_hc 2>;
};
+ usb3_phy0: usb-phy at e65ee000 {
+ compatible = "renesas,r8a7795-usb3-phy",
+ "renesas,rcar-gen3-usb3-phy";
+ reg = <0 0xe65ee000 0 0x90>;
+ clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>,
+ <&usb_extal_clk>;
+ clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 328>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
xhci0: usb at ee000000 {
compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci";
reg = <0 0xee000000 0 0xc00>;
@@ -2380,4 +2393,17 @@
};
};
};
+
+ /* External USB clocks - can be overridden by the board */
+ usb3s0_clk: usb3s0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ usb_extal_clk: usb_extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
};
--
2.11.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH 09/11] arm64: dts: renesas: r8a7796: add usb3_phy node
2017-12-22 10:29 [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.16 Simon Horman
` (7 preceding siblings ...)
2017-12-22 10:29 ` [PATCH 08/11] arm64: dts: renesas: r8a7795: add usb3_phy node Simon Horman
@ 2017-12-22 10:29 ` Simon Horman
2017-12-22 10:29 ` [PATCH 10/11] arm64: dts: renesas: salvator-common: enable usb3_phy0 node Simon Horman
` (2 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Simon Horman @ 2017-12-22 10:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
This patch adds USB3.0 PHY node for r8a7796.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796.dtsi | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index a339047acdc7..c5192d513d7d 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -1403,6 +1403,19 @@
status = "disabled";
};
+ usb3_phy0: usb-phy at e65ee000 {
+ compatible = "renesas,r8a7796-usb3-phy",
+ "renesas,rcar-gen3-usb3-phy";
+ reg = <0 0xe65ee000 0 0x90>;
+ clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>,
+ <&usb_extal_clk>;
+ clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 328>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
xhci0: usb at ee000000 {
compatible = "renesas,xhci-r8a7796",
"renesas,rcar-gen3-xhci";
@@ -2021,4 +2034,17 @@
};
};
};
+
+ /* External USB clocks - can be overridden by the board */
+ usb3s0_clk: usb3s0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ usb_extal_clk: usb_extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
};
--
2.11.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH 10/11] arm64: dts: renesas: salvator-common: enable usb3_phy0 node
2017-12-22 10:29 [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.16 Simon Horman
` (8 preceding siblings ...)
2017-12-22 10:29 ` [PATCH 09/11] arm64: dts: renesas: r8a7796: " Simon Horman
@ 2017-12-22 10:29 ` Simon Horman
2017-12-22 10:29 ` [PATCH 11/11] arm64: dts: renesas: salvator-common: enable usb3_peri0 Simon Horman
2018-01-05 6:39 ` [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.16 Olof Johansson
11 siblings, 0 replies; 13+ messages in thread
From: Simon Horman @ 2017-12-22 10:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
This patch enables usb3_phy0 node for Salvator-X[S].
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/salvator-common.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index 4e800e933944..38831a734019 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -648,6 +648,10 @@
shared-pin;
};
+&usb_extal_clk {
+ clock-frequency = <50000000>;
+};
+
&usb2_phy0 {
pinctrl-0 = <&usb0_pins>;
pinctrl-names = "default";
@@ -663,6 +667,14 @@
status = "okay";
};
+&usb3_phy0 {
+ status = "okay";
+};
+
+&usb3s0_clk {
+ clock-frequency = <100000000>;
+};
+
&wdt0 {
timeout-sec = <60>;
status = "okay";
--
2.11.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH 11/11] arm64: dts: renesas: salvator-common: enable usb3_peri0
2017-12-22 10:29 [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.16 Simon Horman
` (9 preceding siblings ...)
2017-12-22 10:29 ` [PATCH 10/11] arm64: dts: renesas: salvator-common: enable usb3_phy0 node Simon Horman
@ 2017-12-22 10:29 ` Simon Horman
2018-01-05 6:39 ` [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.16 Olof Johansson
11 siblings, 0 replies; 13+ messages in thread
From: Simon Horman @ 2017-12-22 10:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
This patch enables usb3_peri0 that uses usb3_phy0 to enable VBUS
detection for the USB3.0 peripheral.
The Salvator-X[S] has USB3.0 type-A connector and supplies VBUS
if USB3.0 host runs. So, you need a special cable for it, and
to stop the VBUS supplies from the board, after you installs
a gadget driver, you should run the following command to avoid
conflict VBUS supply:
# echo 1 > /sys/kernel/debug/ee020000.usb/b_device
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/salvator-common.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index 38831a734019..a7c1dd1d905a 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -667,6 +667,13 @@
status = "okay";
};
+&usb3_peri0 {
+ phys = <&usb3_phy0>;
+ phy-names = "usb";
+
+ status = "okay";
+};
+
&usb3_phy0 {
status = "okay";
};
--
2.11.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.16
2017-12-22 10:29 [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.16 Simon Horman
` (10 preceding siblings ...)
2017-12-22 10:29 ` [PATCH 11/11] arm64: dts: renesas: salvator-common: enable usb3_peri0 Simon Horman
@ 2018-01-05 6:39 ` Olof Johansson
11 siblings, 0 replies; 13+ messages in thread
From: Olof Johansson @ 2018-01-05 6:39 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Dec 22, 2017 at 11:29:20AM +0100, Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
>
> Please consider these second round of Renesas ARM64 based SoC DT updates
> for v4.16.
>
> This pull request is based on the previous round of
> such requests, tagged as renesas-arm64-dt-for-v4.16,
> which you have already pulled.
>
>
> The following changes since commit 8aba250d7800702bbd2f6a91174e01b9a84ed2dd:
>
> arm64: dts: renesas: r8a77970: use SYSC power domain macros (2017-12-05 09:30:48 +0100)
>
> are available in the git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-arm64-dt2-for-v4.16
>
> for you to fetch changes up to 68b2c029e6200933fa3f6c06c8e6de33e8c78c51:
>
> arm64: dts: renesas: salvator-common: enable usb3_peri0 (2017-12-21 10:22:12 +0100)
>
> ----------------------------------------------------------------
> Second Round of Renesas ARM64 Based SoC DT Updates for v4.16
>
> * Add usb3_phy node to r8a7795 (R-Car H3) and r8a7796 (R-Car M3-W) SoCs, and
> enable usb3_peri0 on salvator boards
>
> * Allow DTBs of boards of r8a7795 (R-Car H3) and r8a7796 SoCs to build
> without any warnings when compiled with W=1 using gcc-linaro-5.4.1-2017.05
> - Move nodes which have no reg property out of bus, they don't belong there
> - Add reg properties to dummy pciec[01] nodes
> - Also sort sub-nodes of root node to allow for easier maintenance
>
> * Add Add EthernetAVB PHY reset to r8a7795 (R-Car H3) and r8a7796 SoCs boards.
>
> Geert Uytterhoeven says "... add properties to describe the EthernetAVB
> PHY reset topology to the common Salvator-X/XS and ULCB DTS files, which
> solves two issues:
> 1. On Salvator-XS, the enable pin of the regulator providing PHY power
> is connected to PRESETn, and PSCI powers down the SoC during system
> suspend. Hence a PHY reset is needed to restore network
> functionality after system resume.
> 2. Linux should not rely on the boot loader having reset the PHY, but
> should reset the PHY during driver probe."
>
Merged, thanks.
-Olof
^ permalink raw reply [flat|nested] 13+ messages in thread