[PATCH v3 1/6] ARM: dts: exynos: Add #sound-dai-cells property to hdmi node in exynos5250.dtsi

[PATCH v3 1/6] ARM: dts: exynos: Add #sound-dai-cells property to hdmi node in exynos5250.dtsi

[Sylwester Nawrocki]

This property is required for specifying link between the HDMI IP block
and the SoC's audio subsystem.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
---
Changes since v1:
 - edited commit summary line.
---
 arch/arm/boot/dts/exynos5250.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 56626d1a4235..71d2ede118e3 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -700,6 +700,7 @@
 					"sclk_hdmiphy", "mout_hdmi";
 			samsung,syscon-phandle = <&pmu_system_controller>;
 			phy = <&hdmiphy>;
+			#sound-dai-cells = <0>;
 			status = "disabled";
 		};
 
-- 
2.14.2

[PATCH v3 2/6] ARM: dts: exynos: Add audio clocks configuration for exynos5250-snow

[Sylwester Nawrocki]

Currently the audio subsystem clocks are not configured properly on Snow
and sound is not working. The MAX98095 CODEC is not getting its master clock
on the MCLK pin connected to the SOC's CLKOUT GPIO. This patch adds CLKOUT
and other clocks configuration so HDMI audio can also be supported.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
---
Changes since v1:
 - edited commit summary line.
---
 arch/arm/boot/dts/exynos5250-snow-common.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index 59cf1b202849..bdf59dd3654b 100644
--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -225,6 +225,16 @@
 	};
 };
 
+&clock {
+	assigned-clocks = <&clock CLK_FOUT_EPLL>;
+	assigned-clock-rates = <49152000>;
+};
+
+&clock_audss {
+	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
+	assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
+};
+
 &cpu0 {
 	cpu0-supply = <&buck2_reg>;
 };
@@ -649,6 +659,11 @@
 	};
 };
 
+&pmu_system_controller {
+	assigned-clocks = <&pmu_system_controller 0>;
+	assigned-clock-parents = <&clock CLK_FIN_PLL>;
+};
+
 &rtc {
 	status = "okay";
 	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
-- 
2.14.2

[PATCH v3 2/6] ARM: dts: exynos: Add audio clocks configuration for exynos5250-snow

[Krzysztof Kozlowski]

On Fri, Mar 09, 2018 at 06:22:46PM +0100, Sylwester Nawrocki wrote:
> Currently the audio subsystem clocks are not configured properly on Snow
> and sound is not working. The MAX98095 CODEC is not getting its master clock
> on the MCLK pin connected to the SOC's CLKOUT GPIO. This patch adds CLKOUT
> and other clocks configuration so HDMI audio can also be supported.
> 
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> ---
> Changes since v1:
>  - edited commit summary line.
> ---
>  arch/arm/boot/dts/exynos5250-snow-common.dtsi | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 

Thanks, applied.

Best regards,
Krzysztof

[PATCH v3 3/6] ARM: dts: exynos: Update of the max98095 node in exynos5250-snow.dts

[Sylwester Nawrocki]

This patch adds missing clocks, clock-names properties so the CODEC can
properly handle its master clock. Without this change sound on exynos5250-snow
doesn't work.
Missing #sound-dai-cells property is also added so it is possible to specify
the DAI links properly for HDMI audio support.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
---
Changes since v1:
 - edited commit summary line.
---
 arch/arm/boot/dts/exynos5250-snow.dts | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 4827cb506fa3..16e37c337a3f 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -27,6 +27,9 @@
 		reg = <0x11>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max98095_en>;
+		clocks = <&pmu_system_controller 0>;
+		clock-names = "mclk";
+		#sound-dai-cells = <1>;
 	};
 };
 
-- 
2.14.2

[PATCH v3 3/6] ARM: dts: exynos: Update of the max98095 node in exynos5250-snow.dts

[Krzysztof Kozlowski]

On Fri, Mar 09, 2018 at 06:22:47PM +0100, Sylwester Nawrocki wrote:
> This patch adds missing clocks, clock-names properties so the CODEC can
> properly handle its master clock. Without this change sound on exynos5250-snow
> doesn't work.
> Missing #sound-dai-cells property is also added so it is possible to specify
> the DAI links properly for HDMI audio support.
> 
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> ---
> Changes since v1:
>  - edited commit summary line.
> ---
>  arch/arm/boot/dts/exynos5250-snow.dts | 3 +++
>  1 file changed, 3 insertions(+)
> 

Thanks, applied.

Best regards,
Krzysztof

[PATCH v3 4/6] ARM: dts: exynos: Enable HDMI audio on Snow Chromebook

[Sylwester Nawrocki]

This patch adds new cpu, codec subnodes according to the updated
"google,snow-audio-max98095" DT bindings and the I2S clock tree
configuration so sound on the HDMI interface can also be supported.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
---
Changes since v2:
 - i2s0/#clock-cells property moved to exynos5250.dtsi
 - edited commit summary line.

Changes since v1:
 - changed order of codec in codec/cpu-dai property
   to match the DT bindings documentation.
---
 arch/arm/boot/dts/exynos5250-snow-common.dtsi | 3 +++
 arch/arm/boot/dts/exynos5250-snow.dts         | 8 ++++++++
 arch/arm/boot/dts/exynos5250.dtsi             | 1 +
 3 files changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index bdf59dd3654b..fd9226d3b207 100644
--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/clock/maxim,max77686.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/samsung-i2s.h>
 #include "exynos5250.dtsi"
 
 / {
@@ -523,6 +524,8 @@
 };
 
 &i2s0 {
+	assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
+	assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 16e37c337a3f..75fdc5e6d423 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -18,6 +18,14 @@
 
 		samsung,model = "Snow-I2S-MAX98095";
 		samsung,audio-codec = <&max98095>;
+
+		cpu {
+			sound-dai = <&i2s0 0>;
+		};
+
+		codec {
+			sound-dai = <&max98095 0>, <&hdmi>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 71d2ede118e3..f6c6c94d3d7d 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -500,6 +500,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&i2s0_bus>;
 			power-domains = <&pd_mau>;
+			#clock-cells = <1>;
 		};
 
 		i2s1: i2s at 12d60000 {
-- 
2.14.2

[PATCH v3 4/6] ARM: dts: exynos: Enable HDMI audio on Snow Chromebook

[Krzysztof Kozlowski]

On Fri, Mar 09, 2018 at 06:22:48PM +0100, Sylwester Nawrocki wrote:
> This patch adds new cpu, codec subnodes according to the updated
> "google,snow-audio-max98095" DT bindings and the I2S clock tree
> configuration so sound on the HDMI interface can also be supported.
> 
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> ---
> Changes since v2:
>  - i2s0/#clock-cells property moved to exynos5250.dtsi
>  - edited commit summary line.
> 
> Changes since v1:
>  - changed order of codec in codec/cpu-dai property
>    to match the DT bindings documentation.
> ---
>  arch/arm/boot/dts/exynos5250-snow-common.dtsi | 3 +++
>  arch/arm/boot/dts/exynos5250-snow.dts         | 8 ++++++++
>  arch/arm/boot/dts/exynos5250.dtsi             | 1 +
>  3 files changed, 12 insertions(+)
> 

Thanks, applied.

Best regards,
Krzysztof

[PATCH v3 5/6] ARM: dts: exynos: Enable HDMI audio support on exynos5420-peach-pit

[Sylwester Nawrocki]

This patch adds new cpu, codec subnodes according to the updated
"google,snow-audio-max98090" DT bindings and the I2S clock tree
configuration so sound on the HDMI interface can also be supported.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
---
Changes since v1:
 - edited commit summary line.
---
 arch/arm/boot/dts/exynos5420-peach-pit.dts | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 5a76ed77dda1..244f0091c21f 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/maxim,max77802.h>
 #include <dt-bindings/regulator/maxim,max77802.h>
+#include <dt-bindings/sound/samsung-i2s.h>
 #include "exynos5420.dtsi"
 #include "exynos5420-cpus.dtsi"
 
@@ -86,6 +87,14 @@
 		samsung,model = "Peach-Pit-I2S-MAX98090";
 		samsung,i2s-controller = <&i2s0>;
 		samsung,audio-codec = <&max98090>;
+
+		cpu {
+			sound-dai = <&i2s0 0>;
+		};
+
+		codec {
+			sound-dai = <&max98090>, <&hdmi>;
+		};
 	};
 
 	usb300_vbus_reg: regulator-usb300 {
@@ -142,6 +151,11 @@
 	vdd-supply = <&ldo9_reg>;
 };
 
+&clock_audss {
+	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
+	assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
+};
+
 &cpu0 {
 	cpu-supply = <&buck2_reg>;
 };
@@ -606,6 +620,7 @@
 		pinctrl-0 = <&max98090_irq>;
 		clocks = <&pmu_system_controller 0>;
 		clock-names = "mclk";
+		#sound-dai-cells = <0>;
 	};
 
 	light-sensor at 44 {
@@ -690,6 +705,8 @@
 };
 
 &i2s0 {
+	assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
+	assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>;
 	status = "okay";
 };
 
-- 
2.14.2

[PATCH v3 5/6] ARM: dts: exynos: Enable HDMI audio support on exynos5420-peach-pit

[Krzysztof Kozlowski]

On Fri, Mar 09, 2018 at 06:22:49PM +0100, Sylwester Nawrocki wrote:
> This patch adds new cpu, codec subnodes according to the updated
> "google,snow-audio-max98090" DT bindings and the I2S clock tree
> configuration so sound on the HDMI interface can also be supported.
> 
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> ---
> Changes since v1:
>  - edited commit summary line.
> ---
>  arch/arm/boot/dts/exynos5420-peach-pit.dts | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 

Thanks, applied.

Best regards,
Krzysztof

[PATCH v3 6/6] ARM: dts: exynos: Enable HDMI audio support on exynos5800-peach-pi

[Sylwester Nawrocki]

This patch adds new cpu, codec subnodes according to the updated
"google,snow-audio-max98091" DT bindings and the I2S clock tree
configuration so sound on the HDMI interface can be also supported.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
---
NOTE:
I couldn't test this patch as I have no access to Peach-pi Chromebook.
I think it shouldn't be applied unless someone actually tests it.

Changes since v1:
 - edited commit summary line.
---
 arch/arm/boot/dts/exynos5800-peach-pi.dts | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 0029ec27819c..0a4766e0484e 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -14,6 +14,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/maxim,max77802.h>
 #include <dt-bindings/regulator/maxim,max77802.h>
+#include <dt-bindings/sound/samsung-i2s.h>
 #include "exynos5800.dtsi"
 #include "exynos5420-cpus.dtsi"
 
@@ -89,6 +90,14 @@
 		samsung,model = "Peach-Pi-I2S-MAX98091";
 		samsung,i2s-controller = <&i2s0>;
 		samsung,audio-codec = <&max98091>;
+
+		cpu {
+			sound-dai = <&i2s0 0>;
+		};
+
+		codec {
+			sound-dai = <&max98091>, <&hdmi>;
+		};
 	};
 
 	usb300_vbus_reg: regulator-usb300 {
@@ -145,6 +154,11 @@
 	vdd-supply = <&ldo9_reg>;
 };
 
+&clock_audss {
+	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
+	assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
+};
+
 &cpu0 {
 	cpu-supply = <&buck2_reg>;
 };
@@ -609,6 +623,7 @@
 		pinctrl-0 = <&max98091_irq>;
 		clocks = <&pmu_system_controller 0>;
 		clock-names = "mclk";
+		#sound-dai-cells = <0>;
 	};
 
 	light-sensor at 44 {
@@ -661,6 +676,8 @@
 };
 
 &i2s0 {
+	assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
+	assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>;
 	status = "okay";
 };
 
-- 
2.14.2

[PATCH v3 6/6] ARM: dts: exynos: Enable HDMI audio support on exynos5800-peach-pi

[Krzysztof Kozlowski]

On Fri, Mar 09, 2018 at 06:22:50PM +0100, Sylwester Nawrocki wrote:
> This patch adds new cpu, codec subnodes according to the updated
> "google,snow-audio-max98091" DT bindings and the I2S clock tree
> configuration so sound on the HDMI interface can be also supported.
> 
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> ---
> NOTE:
> I couldn't test this patch as I have no access to Peach-pi Chromebook.
> I think it shouldn't be applied unless someone actually tests it.
> 
> Changes since v1:
>  - edited commit summary line.
> ---
>  arch/arm/boot/dts/exynos5800-peach-pi.dts | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 

Thanks, applied.

Best regards,
Krzysztof

[PATCH v3 1/6] ARM: dts: exynos: Add #sound-dai-cells property to hdmi node in exynos5250.dtsi

[Krzysztof Kozlowski]

On Fri, Mar 09, 2018 at 06:22:45PM +0100, Sylwester Nawrocki wrote:
> This property is required for specifying link between the HDMI IP block
> and the SoC's audio subsystem.
> 
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> ---
> Changes since v1:
>  - edited commit summary line.
> ---
>  arch/arm/boot/dts/exynos5250.dtsi | 1 +
>  1 file changed, 1 insertion(+)
> 

Thanks, applied.

Best regards,
Krzysztof