[PATCH 0/2] pinctrl: nand: meson: fix missing data pins

[PATCH 0/2] pinctrl: nand: meson: fix missing data pins

[Yixun Lan]

Hi Linus
   We found the data pins of NAND controller are actually mising from
the nand pinctrl group in the GXBB, GXL SoC driver, these two patches
will fix these issue.
   I have prepared the two patches separated with different Fix tag,
but I can squash them into one patch if you prefer, since the meson nand
driver has never been pushed into mainline (so probably the Fix tag is
useless).
   Btw, the patches are formated on top your 'for-next' branch,
and I'm fine with this merged as for-next.

   Thanks

Yixun Lan (2):
  pinctrl: nand: meson-gxbb: fix missing data pins
  pinctrl: nand: meson-gxl: fix missing data pins

 drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 4 ++--
 drivers/pinctrl/meson/pinctrl-meson-gxl.c  | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

-- 
2.17.0

[PATCH 1/2] pinctrl: nand: meson-gxbb: fix missing data pins

[Yixun Lan]

The data pin 0-7 of the NAND controller are actually missing from
the nand pinctrl group, so we fix it here.

Fixes: cd1e3b01c7d3 ("pinctrl: amlogic: gxbb: add nand pins")
Reported-by: Liang Yang <liang.yang@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
 drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
index 9079020259c5..2c97a2e07a5f 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
@@ -627,8 +627,8 @@ static const char * const sdio_groups[] = {
 };
 
 static const char * const nand_groups[] = {
-	"nand_ce0", "nand_ce1", "nand_rb0", "nand_ale", "nand_cle",
-	"nand_wen_clk", "nand_ren_wr", "nand_dqs",
+	"emmc_nand_d07", "nand_ce0", "nand_ce1", "nand_rb0", "nand_ale",
+	"nand_cle", "nand_wen_clk", "nand_ren_wr", "nand_dqs",
 };
 
 static const char * const uart_a_groups[] = {
-- 
2.17.0

[PATCH 1/2] pinctrl: nand: meson-gxbb: fix missing data pins

[Linus Walleij]

On Thu, May 10, 2018 at 12:08 AM, Yixun Lan <yixun.lan@amlogic.com> wrote:

> The data pin 0-7 of the NAND controller are actually missing from
> the nand pinctrl group, so we fix it here.
>
> Fixes: cd1e3b01c7d3 ("pinctrl: amlogic: gxbb: add nand pins")
> Reported-by: Liang Yang <liang.yang@amlogic.com>
> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>

Patch applied.

Yours,
Linus Walleij

[PATCH 2/2] pinctrl: nand: meson-gxl: fix missing data pins

[Yixun Lan]

The data pin 0-7 of the NAND controller are actually missing from
the nand pinctrl group, so we fix it here.

Fixes: 0f15f500ff2c ("pinctrl: meson: Add GXL pinctrl definitions")
Reported-by: Liang Yang <liang.yang@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
 drivers/pinctrl/meson/pinctrl-meson-gxl.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxl.c b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
index b3786cde963d..7dae1d7bf6b0 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxl.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
@@ -617,8 +617,8 @@ static const char * const sdio_groups[] = {
 };
 
 static const char * const nand_groups[] = {
-	"nand_ce0", "nand_ce1", "nand_rb0", "nand_ale", "nand_cle",
-	"nand_wen_clk", "nand_ren_wr", "nand_dqs",
+	"emmc_nand_d07", "nand_ce0", "nand_ce1", "nand_rb0", "nand_ale",
+	"nand_cle", "nand_wen_clk", "nand_ren_wr", "nand_dqs",
 };
 
 static const char * const uart_a_groups[] = {
-- 
2.17.0