[PATCH v2] dmaengine: qcom: bam_dma: check if the runtime pm enabled

[PATCH v2] dmaengine: qcom: bam_dma: check if the runtime pm enabled

[Srinivas Kandagatla]

Disabling pm runtime at probe is not sufficient to get BAM working
on remotely controller instances. pm_runtime_get_sync() would return
-EACCES in such cases.
So check if runtime pm is enabled before returning error from bam functions.

Fixes: 5b4a68952a89 ("dmaengine: qcom: bam_dma: disable runtime pm on remote controlled")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 drivers/dma/qcom/bam_dma.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/dma/qcom/bam_dma.c b/drivers/dma/qcom/bam_dma.c
index d29275b97e84..4a828c18099a 100644
--- a/drivers/dma/qcom/bam_dma.c
+++ b/drivers/dma/qcom/bam_dma.c
@@ -524,6 +524,14 @@ static int bam_alloc_chan(struct dma_chan *chan)
 	return 0;
 }
 
+static int bam_pm_runtime_get_sync(struct device *dev)
+{
+	if (pm_runtime_enabled(dev))
+		return pm_runtime_get_sync(dev);
+
+	return 0;
+}
+
 /**
  * bam_free_chan - Frees dma resources associated with specific channel
  * @chan: specified channel
@@ -539,7 +547,7 @@ static void bam_free_chan(struct dma_chan *chan)
 	unsigned long flags;
 	int ret;
 
-	ret = pm_runtime_get_sync(bdev->dev);
+	ret = bam_pm_runtime_get_sync(bdev->dev);
 	if (ret < 0)
 		return;
 
@@ -720,7 +728,7 @@ static int bam_pause(struct dma_chan *chan)
 	unsigned long flag;
 	int ret;
 
-	ret = pm_runtime_get_sync(bdev->dev);
+	ret = bam_pm_runtime_get_sync(bdev->dev);
 	if (ret < 0)
 		return ret;
 
@@ -746,7 +754,7 @@ static int bam_resume(struct dma_chan *chan)
 	unsigned long flag;
 	int ret;
 
-	ret = pm_runtime_get_sync(bdev->dev);
+	ret = bam_pm_runtime_get_sync(bdev->dev);
 	if (ret < 0)
 		return ret;
 
@@ -852,7 +860,7 @@ static irqreturn_t bam_dma_irq(int irq, void *data)
 	if (srcs & P_IRQ)
 		tasklet_schedule(&bdev->task);
 
-	ret = pm_runtime_get_sync(bdev->dev);
+	ret = bam_pm_runtime_get_sync(bdev->dev);
 	if (ret < 0)
 		return ret;
 
@@ -969,7 +977,7 @@ static void bam_start_dma(struct bam_chan *bchan)
 	if (!vd)
 		return;
 
-	ret = pm_runtime_get_sync(bdev->dev);
+	ret = bam_pm_runtime_get_sync(bdev->dev);
 	if (ret < 0)
 		return;
 
-- 
2.16.2

[PATCH v2] dmaengine: qcom: bam_dma: check if the runtime pm enabled

[Vinod]

On 17-05-18, 10:42, Srinivas Kandagatla wrote:
> Disabling pm runtime at probe is not sufficient to get BAM working
> on remotely controller instances. pm_runtime_get_sync() would return
> -EACCES in such cases.
> So check if runtime pm is enabled before returning error from bam functions.
> 
> Fixes: 5b4a68952a89 ("dmaengine: qcom: bam_dma: disable runtime pm on remote controlled")
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
>  drivers/dma/qcom/bam_dma.c | 18 +++++++++++++-----
>  1 file changed, 13 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/dma/qcom/bam_dma.c b/drivers/dma/qcom/bam_dma.c
> index d29275b97e84..4a828c18099a 100644
> --- a/drivers/dma/qcom/bam_dma.c
> +++ b/drivers/dma/qcom/bam_dma.c
> @@ -524,6 +524,14 @@ static int bam_alloc_chan(struct dma_chan *chan)
>  	return 0;
>  }
>  
> +static int bam_pm_runtime_get_sync(struct device *dev)
> +{
> +	if (pm_runtime_enabled(dev))
> +		return pm_runtime_get_sync(dev);
> +
> +	return 0;
> +}

This makes it look lot neater :)

Applied, thanks

-- 
~Vinod