[PATCH] mmc: sunxi: allow 3.3V DDR when DDR is available

[PATCH] mmc: sunxi: allow 3.3V DDR when DDR is available

[Icenowy Zheng]

Some Allwinner boards feature an on-board eMMC with fixed 3.3V voltage
(e.g. Banana Pi M2+), and in this case both the eMMC and the SoC are
capable of doing 3.3V DDR transmission.

Add capability of 3.3V DDR when DDR is available (extra clock or new
timing).

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
 drivers/mmc/host/sunxi-mmc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
index 8e7f3e35ee3d..4ea8e2611079 100644
--- a/drivers/mmc/host/sunxi-mmc.c
+++ b/drivers/mmc/host/sunxi-mmc.c
@@ -1388,7 +1388,7 @@ static int sunxi_mmc_probe(struct platform_device *pdev)
 				  MMC_CAP_ERASE | MMC_CAP_SDIO_IRQ;
 
 	if (host->cfg->clk_delays || host->use_new_timings)
-		mmc->caps      |= MMC_CAP_1_8V_DDR;
+		mmc->caps      |= MMC_CAP_1_8V_DDR | MMC_CAP_3_3V_DDR;
 
 	ret = mmc_of_parse(mmc);
 	if (ret)
-- 
2.18.0

[PATCH] mmc: sunxi: allow 3.3V DDR when DDR is available

[Maxime Ripard]

On Sun, Jul 22, 2018 at 08:54:07PM +0800, Icenowy Zheng wrote:
> Some Allwinner boards feature an on-board eMMC with fixed 3.3V voltage
> (e.g. Banana Pi M2+), and in this case both the eMMC and the SoC are
> capable of doing 3.3V DDR transmission.
> 
> Add capability of 3.3V DDR when DDR is available (extra clock or new
> timing).
> 
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>

Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>

Maxime

-- 
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180724/a598348e/attachment.sig>

[PATCH] mmc: sunxi: allow 3.3V DDR when DDR is available

[Ulf Hansson]

On 22 July 2018 at 14:54, Icenowy Zheng <icenowy@aosc.io> wrote:
> Some Allwinner boards feature an on-board eMMC with fixed 3.3V voltage
> (e.g. Banana Pi M2+), and in this case both the eMMC and the SoC are
> capable of doing 3.3V DDR transmission.
>
> Add capability of 3.3V DDR when DDR is available (extra clock or new
> timing).
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>

Thanks, applied for next!

Kind regards
Uffe

> ---
>  drivers/mmc/host/sunxi-mmc.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
> index 8e7f3e35ee3d..4ea8e2611079 100644
> --- a/drivers/mmc/host/sunxi-mmc.c
> +++ b/drivers/mmc/host/sunxi-mmc.c
> @@ -1388,7 +1388,7 @@ static int sunxi_mmc_probe(struct platform_device *pdev)
>                                   MMC_CAP_ERASE | MMC_CAP_SDIO_IRQ;
>
>         if (host->cfg->clk_delays || host->use_new_timings)
> -               mmc->caps      |= MMC_CAP_1_8V_DDR;
> +               mmc->caps      |= MMC_CAP_1_8V_DDR | MMC_CAP_3_3V_DDR;
>
>         ret = mmc_of_parse(mmc);
>         if (ret)
> --
> 2.18.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html