[PATCH v4 0/6] Proper arch timer support for Exynos5433-based TM2(e) boards

[PATCH v4 0/6] Proper arch timer support for Exynos5433-based TM2(e) boards

[Marek Szyprowski]

Dear All,

This patchset is an attempt to submit the last piece of missing code
to have proper support for Exynos5433 SoCs based TM2(e) boards. It
performs a cleanup of timer configuration, which so far needed various
out-of-tree workarounds. The fixes provided by this patchset are also
needed for add proper support for system suspend/resume.

Best regards
Marek Szyprowski
Samsung R&D Institute Poland


Changelog:

v4:
- fixes lack of fixup in patch #3, pointed by Krzysztof Kozlowski

v3:
- added patch, which splits resources and interrupts allocation
- simplified arch timer cooperation mode
- dropped CPU hotplug priority change patch, it is not really needed
- removed more non-dt dead code

v2:
- dropped arch timer patch, it will be discussed separately
- fixed issues pointed by Krzysztof Kozlowski

v1: https://patchwork.kernel.org/project/linux-samsung-soc/list/?series=27965&state=*&archive=both
- initial version


Patch summary:

Marek Szyprowski (6):
  clocksource: exynos_mct: Remove dead code
  clocksource: exynos_mct: Fix error path in timer resources
    initialization
  clocksource: exynos_mct: Refactor resources allocation
  clocksource: exynos_mct: Add arch_timer cooperation mode for ARM64
  arm64: dts: exynos: Move arch-timer node to right place
  arm64: platform: Add enable Exynos Multi-Core Timer driver

 arch/arm64/Kconfig.platforms               |  1 +
 arch/arm64/boot/dts/exynos/exynos5433.dtsi | 23 +++---
 drivers/clocksource/exynos_mct.c           | 81 ++++++++++++++--------
 3 files changed, 67 insertions(+), 38 deletions(-)

-- 
2.17.1

[PATCH v4 1/6] clocksource: exynos_mct: Remove dead code

[Marek Szyprowski]

Exynos Multi-Core Timer driver is used only on device-tree based
systems, so remove non-dt related code. In case of !CONFIG_OF
the code is anyway equal because of_irq_count() has a stub
returning 0. Device node pointer is always provided when driver
has been probed from device tree.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
---
 drivers/clocksource/exynos_mct.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index 7a244b681876..ef18bbf8d20c 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -507,13 +507,12 @@ static int __init exynos4_timer_resources(struct device_node *np, void __iomem *
 	int err, cpu;
 	struct clk *mct_clk, *tick_clk;
 
-	tick_clk = np ? of_clk_get_by_name(np, "fin_pll") :
-				clk_get(NULL, "fin_pll");
+	tick_clk = of_clk_get_by_name(np, "fin_pll");
 	if (IS_ERR(tick_clk))
 		panic("%s: unable to determine tick clock rate\n", __func__);
 	clk_rate = clk_get_rate(tick_clk);
 
-	mct_clk = np ? of_clk_get_by_name(np, "mct") : clk_get(NULL, "mct");
+	mct_clk = of_clk_get_by_name(np, "mct");
 	if (IS_ERR(mct_clk))
 		panic("%s: unable to retrieve mct clock instance\n", __func__);
 	clk_prepare_enable(mct_clk);
@@ -581,11 +580,7 @@ static int __init mct_init_dt(struct device_node *np, unsigned int int_type)
 	 * timer irqs are specified after the four global timer
 	 * irqs are specified.
 	 */
-#ifdef CONFIG_OF
 	nr_irqs = of_irq_count(np);
-#else
-	nr_irqs = 0;
-#endif
 	for (i = MCT_L0_IRQ; i < nr_irqs; i++)
 		mct_irqs[i] = irq_of_parse_and_map(np, i);
 
-- 
2.17.1

[PATCH v4 2/6] clocksource: exynos_mct: Fix error path in timer resources initialization

[Marek Szyprowski]

While freeing interrupt handlers in error path, don't assume that all
requested interrupts are per-processor interrupts and properly release
standard interrupts too.

Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Fixes: 56a94f13919c ("clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
---
 drivers/clocksource/exynos_mct.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index ef18bbf8d20c..49413900b24c 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -561,7 +561,19 @@ static int __init exynos4_timer_resources(struct device_node *np, void __iomem *
 	return 0;
 
 out_irq:
-	free_percpu_irq(mct_irqs[MCT_L0_IRQ], &percpu_mct_tick);
+	if (mct_int_type == MCT_INT_PPI) {
+		free_percpu_irq(mct_irqs[MCT_L0_IRQ], &percpu_mct_tick);
+	} else {
+		for_each_possible_cpu(cpu) {
+			struct mct_clock_event_device *pcpu_mevt =
+				per_cpu_ptr(&percpu_mct_tick, cpu);
+
+			if (pcpu_mevt->evt.irq != -1) {
+				free_irq(pcpu_mevt->evt.irq, pcpu_mevt);
+				pcpu_mevt->evt.irq = -1;
+			}
+		}
+	}
 	return err;
 }
 
-- 
2.17.1

[PATCH v4 3/6] clocksource: exynos_mct: Refactor resources allocation

[Marek Szyprowski]

Move interrupts allocation from exynos4_timer_resources() into separate
function together with the interrupt number parsing code from
mct_init_dt(), so the code for managing interrupts is kept together.
While touching exynos4_timer_resources() function, move of_iomap() to it.
No functional changes.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
---
 drivers/clocksource/exynos_mct.c | 50 +++++++++++++++++++-------------
 1 file changed, 30 insertions(+), 20 deletions(-)

diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index 49413900b24c..4c886ff2941a 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -502,11 +502,14 @@ static int exynos4_mct_dying_cpu(unsigned int cpu)
 	return 0;
 }
 
-static int __init exynos4_timer_resources(struct device_node *np, void __iomem *base)
+static int __init exynos4_timer_resources(struct device_node *np)
 {
-	int err, cpu;
 	struct clk *mct_clk, *tick_clk;
 
+	reg_base = of_iomap(np, 0);
+	if (!reg_base)
+		panic("%s: unable to ioremap mct address space\n", __func__);
+
 	tick_clk = of_clk_get_by_name(np, "fin_pll");
 	if (IS_ERR(tick_clk))
 		panic("%s: unable to determine tick clock rate\n", __func__);
@@ -517,9 +520,27 @@ static int __init exynos4_timer_resources(struct device_node *np, void __iomem *
 		panic("%s: unable to retrieve mct clock instance\n", __func__);
 	clk_prepare_enable(mct_clk);
 
-	reg_base = base;
-	if (!reg_base)
-		panic("%s: unable to ioremap mct address space\n", __func__);
+	return 0;
+}
+
+static int __init exynos4_timer_interrupts(struct device_node *np,
+					   unsigned int int_type)
+{
+	int nr_irqs, i, err, cpu;
+
+	mct_int_type = int_type;
+
+	/* This driver uses only one global timer interrupt */
+	mct_irqs[MCT_G0_IRQ] = irq_of_parse_and_map(np, MCT_G0_IRQ);
+
+	/*
+	 * Find out the number of local irqs specified. The local
+	 * timer irqs are specified after the four global timer
+	 * irqs are specified.
+	 */
+	nr_irqs = of_irq_count(np);
+	for (i = MCT_L0_IRQ; i < nr_irqs; i++)
+		mct_irqs[i] = irq_of_parse_and_map(np, i);
 
 	if (mct_int_type == MCT_INT_PPI) {
 
@@ -579,24 +600,13 @@ static int __init exynos4_timer_resources(struct device_node *np, void __iomem *
 
 static int __init mct_init_dt(struct device_node *np, unsigned int int_type)
 {
-	u32 nr_irqs, i;
 	int ret;
 
-	mct_int_type = int_type;
-
-	/* This driver uses only one global timer interrupt */
-	mct_irqs[MCT_G0_IRQ] = irq_of_parse_and_map(np, MCT_G0_IRQ);
-
-	/*
-	 * Find out the number of local irqs specified. The local
-	 * timer irqs are specified after the four global timer
-	 * irqs are specified.
-	 */
-	nr_irqs = of_irq_count(np);
-	for (i = MCT_L0_IRQ; i < nr_irqs; i++)
-		mct_irqs[i] = irq_of_parse_and_map(np, i);
+	ret = exynos4_timer_resources(np);
+	if (ret)
+		return ret;
 
-	ret = exynos4_timer_resources(np, of_iomap(np, 0));
+	ret = exynos4_timer_interrupts(np, int_type);
 	if (ret)
 		return ret;
 
-- 
2.17.1

[PATCH v4 3/6] clocksource: exynos_mct: Refactor resources allocation

[Krzysztof Kozlowski]

On Thu, 18 Oct 2018 at 11:57, Marek Szyprowski <m.szyprowski@samsung.com> wrote:
>
> Move interrupts allocation from exynos4_timer_resources() into separate
> function together with the interrupt number parsing code from
> mct_init_dt(), so the code for managing interrupts is kept together.
> While touching exynos4_timer_resources() function, move of_iomap() to it.
> No functional changes.
>
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
> Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
> ---
>  drivers/clocksource/exynos_mct.c | 50 +++++++++++++++++++-------------
>  1 file changed, 30 insertions(+), 20 deletions(-)

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>

Best regards,
Krzysztof

[PATCH v4 4/6] clocksource: exynos_mct: Add arch_timer cooperation mode for ARM64

[Marek Szyprowski]

To get ARM Architected Timers working on Samsung Exynos SoCs, one has to
first configure and enable Exynos Multi-Core Timer, because they both
share some common hardware blocks (global system counter). This patch
adds a mode of cooperation with arch_timer driver, so kernel can use
CP15 based timer interface via arch_timer driver, which is mandatory
on ARM64. In such mode MCT driver only enables its clocks and starts
global timer. Everything else will be handled by arch_timer driver.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
---
 drivers/clocksource/exynos_mct.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index 4c886ff2941a..1f5249fb25fd 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -606,6 +606,16 @@ static int __init mct_init_dt(struct device_node *np, unsigned int int_type)
 	if (ret)
 		return ret;
 
+	if (IS_ENABLED(CONFIG_ARM64) && IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) {
+		struct device_node *np = of_find_compatible_node(NULL, NULL,
+							     "arm,armv8-timer");
+		if (np) {
+			of_node_put(np);
+			exynos4_mct_frc_start();
+			return 0;
+		}
+	}
+
 	ret = exynos4_timer_interrupts(np, int_type);
 	if (ret)
 		return ret;
-- 
2.17.1

[PATCH v4 4/6] clocksource: exynos_mct: Add arch_timer cooperation mode for ARM64

[Krzysztof Kozlowski]

On Thu, 18 Oct 2018 at 11:57, Marek Szyprowski <m.szyprowski@samsung.com> wrote:
>
> To get ARM Architected Timers working on Samsung Exynos SoCs, one has to
> first configure and enable Exynos Multi-Core Timer, because they both
> share some common hardware blocks (global system counter). This patch
> adds a mode of cooperation with arch_timer driver, so kernel can use
> CP15 based timer interface via arch_timer driver, which is mandatory
> on ARM64. In such mode MCT driver only enables its clocks and starts
> global timer. Everything else will be handled by arch_timer driver.
>
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
> Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
> ---
>  drivers/clocksource/exynos_mct.c | 10 ++++++++++
>  1 file changed, 10 insertions(+)

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>

Best regards,
Krzysztof

[PATCH v4 5/6] arm64: dts: exynos: Move arch-timer node to right place

[Marek Szyprowski]

Move ARM architected timer device-tree node to the beginning of 'soc'
node, to group it together with other ARM CPU core devices (like PMU).

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
---
 arch/arm64/boot/dts/exynos/exynos5433.dtsi | 23 +++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)

diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 2131f12364cb..fa20eb3495b3 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -255,6 +255,18 @@
 			interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
 		};
 
+		timer: timer {
+			compatible = "arm,armv8-timer";
+			interrupts = <GIC_PPI 13
+					(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+				<GIC_PPI 14
+					(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+				<GIC_PPI 11
+					(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+				<GIC_PPI 10
+					(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
 		chipid at 10000000 {
 			compatible = "samsung,exynos4210-chipid";
 			reg = <0x10000000 0x100>;
@@ -1750,17 +1762,6 @@
 		};
 	};
 
-	timer: timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13
-				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
-			<GIC_PPI 14
-				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
-			<GIC_PPI 11
-				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
-			<GIC_PPI 10
-				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
-	};
 };
 
 #include "exynos5433-bus.dtsi"
-- 
2.17.1

[PATCH v4 6/6] arm64: platform: Add enable Exynos Multi-Core Timer driver

[Marek Szyprowski]

On Exynos SoCs enabling MCT driver is required even if ARM Architected
Timer driver is used to for managing timer hardware and clock source
events.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
---
 arch/arm64/Kconfig.platforms | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 51bc479334a4..7cc687580fad 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -62,6 +62,7 @@ config ARCH_BRCMSTB
 config ARCH_EXYNOS
 	bool "ARMv8 based Samsung Exynos SoC family"
 	select COMMON_CLK_SAMSUNG
+	select CLKSRC_EXYNOS_MCT
 	select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS
 	select EXYNOS_PMU
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
-- 
2.17.1