[PATCH 10/14] regulator: dts: set proper lradc vref on OLinuXino Lime2

[maxime.ripard@bootlin.com (Maxime Ripard)]

On Tue, Nov 27, 2018 at 05:41:10PM +0800, Chen-Yu Tsai wrote:
> On Tue, Nov 27, 2018 at 5:37 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
> >
> > On Mon, Nov 26, 2018 at 05:27:51PM +0200, Priit Laes wrote:
> > > From: Olliver Schinagl <oliver@schinagl.nl>
> > >
> > > The lradc's analog reference voltage is set to 3.0 volt in the
> > > hardware. This is more or less set in copper for at least lradc0. Set the
> > > property in the dts to ensure the lradc is referenced properly.
> > >
> > > Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
> > > Signed-off-by: Priit Laes <plaes@plaes.org>
> >
> > I'm not sure why that patch is part of this series, but I applied
> > it. Thanks!
> 
> Please help fix up the subject. Should read
> 
> "ARM: dts: sun7i: set proper lradc vref on OLinuXino Lime2"
> 
> or
> 
> "ARM: dts: sun7i: olinoxino-lime2: set proper lradc vref"

Yes, I've noticed it while applying, and this is already fixed :)

Thanks for the reminder!
Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20181127/01490643/attachment.sig>