Re: [PATCH 06/14] media: platform: fix several typos

["Niklas Söderlund" <niklas.soderlund@ragnatech.se>]

Hi Mauro,

Thanks for your patch,

On 2019-02-18 14:29:00 -0500, Mauro Carvalho Chehab wrote:
> Use codespell to fix lots of typos over frontends.
> 
> Manually verified to avoid false-positives.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

For drivers/media/platform/rcar-vin/*

Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

> ---
>  drivers/media/platform/Kconfig                     |  2 +-
>  drivers/media/platform/atmel/atmel-isi.c           |  4 ++--
>  drivers/media/platform/coda/coda-jpeg.c            |  2 +-
>  drivers/media/platform/davinci/isif.c              |  4 ++--
>  drivers/media/platform/davinci/vpbe.c              |  2 +-
>  drivers/media/platform/davinci/vpif.c              |  2 +-
>  drivers/media/platform/davinci/vpif_display.c      |  4 ++--
>  .../media/platform/exynos4-is/fimc-is-command.h    |  2 +-
>  drivers/media/platform/exynos4-is/fimc-is-param.h  |  2 +-
>  drivers/media/platform/exynos4-is/media-dev.h      |  2 +-
>  drivers/media/platform/exynos4-is/mipi-csis.c      |  4 ++--
>  drivers/media/platform/marvell-ccic/mmp-driver.c   |  4 ++--
>  drivers/media/platform/mtk-mdp/mtk_mdp_core.h      |  6 +++---
>  drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c |  2 +-
>  drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h |  4 ++--
>  drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c |  2 +-
>  .../media/platform/mtk-vcodec/vdec/vdec_h264_if.c  |  4 ++--
>  .../media/platform/mtk-vcodec/vdec/vdec_vp8_if.c   |  2 +-
>  drivers/media/platform/mtk-vcodec/vdec_drv_if.h    |  2 +-
>  drivers/media/platform/mtk-vcodec/vdec_vpu_if.h    |  2 +-
>  drivers/media/platform/omap/omap_vout.c            |  4 ++--
>  drivers/media/platform/omap/omap_voutdef.h         |  4 ++--
>  drivers/media/platform/omap3isp/isp.c              |  2 +-
>  drivers/media/platform/omap3isp/ispccdc.c          |  4 ++--
>  drivers/media/platform/omap3isp/ispcsi2.c          |  2 +-
>  drivers/media/platform/pxa_camera.c                |  2 +-
>  drivers/media/platform/qcom/venus/core.h           |  2 +-
>  drivers/media/platform/rcar-vin/rcar-dma.c         |  2 +-
>  drivers/media/platform/rcar-vin/rcar-v4l2.c        |  4 ++--
>  drivers/media/platform/rockchip/rga/rga-hw.c       |  6 +++---
>  drivers/media/platform/s3c-camif/camif-core.h      |  2 +-
>  drivers/media/platform/s5p-jpeg/jpeg-core.h        |  4 ++--
>  drivers/media/platform/s5p-mfc/s5p_mfc_common.h    |  2 +-
>  drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c      |  2 +-
>  drivers/media/platform/s5p-mfc/s5p_mfc_dec.c       |  2 +-
>  drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c    |  2 +-
>  drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c    |  4 ++--
>  .../media/platform/sti/c8sectpfe/c8sectpfe-core.h  |  2 +-
>  drivers/media/platform/sti/delta/delta.h           |  2 +-
>  drivers/media/platform/sti/hva/hva-h264.c          |  2 +-
>  drivers/media/platform/stm32/stm32-dcmi.c          |  2 +-
>  drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h |  2 +-
>  drivers/media/platform/ti-vpe/vpdma.c              | 14 +++++++-------
>  drivers/media/platform/ti-vpe/vpe.c                |  2 +-
>  drivers/media/platform/vsp1/vsp1_brx.c             |  4 ++--
>  drivers/media/platform/xilinx/xilinx-vip.c         |  2 +-
>  46 files changed, 70 insertions(+), 70 deletions(-)
> 
> diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
> index 6cff26b29a38..4acbed189644 100644
> --- a/drivers/media/platform/Kconfig
> +++ b/drivers/media/platform/Kconfig
> @@ -668,7 +668,7 @@ menuconfig SDR_PLATFORM_DRIVERS
>  if SDR_PLATFORM_DRIVERS
>  
>  config VIDEO_RCAR_DRIF
> -	tristate "Renesas Digitial Radio Interface (DRIF)"
> +	tristate "Renesas Digital Radio Interface (DRIF)"
>  	depends on VIDEO_V4L2
>  	depends on ARCH_RENESAS || COMPILE_TEST
>  	select VIDEOBUF2_VMALLOC
> diff --git a/drivers/media/platform/atmel/atmel-isi.c b/drivers/media/platform/atmel/atmel-isi.c
> index fdb255e4a956..08b8d5583080 100644
> --- a/drivers/media/platform/atmel/atmel-isi.c
> +++ b/drivers/media/platform/atmel/atmel-isi.c
> @@ -110,7 +110,7 @@ struct atmel_isi {
>  	bool				enable_preview_path;
>  
>  	struct completion		complete;
> -	/* ISI peripherial clock */
> +	/* ISI peripheral clock */
>  	struct clk			*pclk;
>  	unsigned int			irq;
>  
> @@ -1078,7 +1078,7 @@ static void isi_graph_notify_unbind(struct v4l2_async_notifier *notifier,
>  
>  	dev_dbg(isi->dev, "Removing %s\n", video_device_node_name(isi->vdev));
>  
> -	/* Checks internaly if vdev have been init or not */
> +	/* Checks internally if vdev have been init or not */
>  	video_unregister_device(isi->vdev);
>  }
>  
> diff --git a/drivers/media/platform/coda/coda-jpeg.c b/drivers/media/platform/coda/coda-jpeg.c
> index 9f899a6cefed..39a2351c1e48 100644
> --- a/drivers/media/platform/coda/coda-jpeg.c
> +++ b/drivers/media/platform/coda/coda-jpeg.c
> @@ -103,7 +103,7 @@ static const unsigned char chroma_ac_value[162 + 2] = {
>  
>  /*
>   * Quantization tables for luminance and chrominance components in
> - * zig-zag scan order from the Freescale i.MX VPU libaries
> + * zig-zag scan order from the Freescale i.MX VPU libraries
>   */
>  
>  static unsigned char luma_q[64] = {
> diff --git a/drivers/media/platform/davinci/isif.c b/drivers/media/platform/davinci/isif.c
> index 340f8218f54d..47cecd10eb9f 100644
> --- a/drivers/media/platform/davinci/isif.c
> +++ b/drivers/media/platform/davinci/isif.c
> @@ -328,7 +328,7 @@ static void isif_config_bclamp(struct isif_black_clamp *bc)
>  	if (bc->en) {
>  		val = bc->bc_mode_color << ISIF_BC_MODE_COLOR_SHIFT;
>  
> -		/* Enable BC and horizontal clamp caculation paramaters */
> +		/* Enable BC and horizontal clamp calculation parameters */
>  		val = val | 1 | (bc->horz.mode << ISIF_HORZ_BC_MODE_SHIFT);
>  
>  		regw(val, CLAMPCFG);
> @@ -358,7 +358,7 @@ static void isif_config_bclamp(struct isif_black_clamp *bc)
>  			regw(bc->horz.win_start_v_calc, CLHWIN2);
>  		}
>  
> -		/* vertical clamp caculation paramaters */
> +		/* vertical clamp calculation parameters */
>  
>  		/* Reset clamp value sel for previous line */
>  		val |=
> diff --git a/drivers/media/platform/davinci/vpbe.c b/drivers/media/platform/davinci/vpbe.c
> index 4766a7a23d16..8339163a5231 100644
> --- a/drivers/media/platform/davinci/vpbe.c
> +++ b/drivers/media/platform/davinci/vpbe.c
> @@ -242,7 +242,7 @@ static int vpbe_set_output(struct vpbe_device *vpbe_dev, int index)
>  		goto unlock;
>  
>  	/*
> -	 * It is assumed that venc or extenal encoder will set a default
> +	 * It is assumed that venc or external encoder will set a default
>  	 * mode in the sub device. For external encoder or LCD pannel output,
>  	 * we also need to set up the lcd port for the required mode. So setup
>  	 * the lcd port for the default mode that is configured in the board
> diff --git a/drivers/media/platform/davinci/vpif.c b/drivers/media/platform/davinci/vpif.c
> index 16352e2263d2..df66461f5d4f 100644
> --- a/drivers/media/platform/davinci/vpif.c
> +++ b/drivers/media/platform/davinci/vpif.c
> @@ -1,7 +1,7 @@
>  /*
>   * vpif - Video Port Interface driver
>   * VPIF is a receiver and transmitter for video data. It has two channels(0, 1)
> - * that receiveing video byte stream and two channels(2, 3) for video output.
> + * that receiving video byte stream and two channels(2, 3) for video output.
>   * The hardware supports SDTV, HDTV formats, raw data capture.
>   * Currently, the driver supports NTSC and PAL standards.
>   *
> diff --git a/drivers/media/platform/davinci/vpif_display.c b/drivers/media/platform/davinci/vpif_display.c
> index 3517487d9760..f4b4f2a1dfc0 100644
> --- a/drivers/media/platform/davinci/vpif_display.c
> +++ b/drivers/media/platform/davinci/vpif_display.c
> @@ -138,7 +138,7 @@ static int vpif_buffer_queue_setup(struct vb2_queue *vq,
>   * vpif_buffer_queue : Callback function to add buffer to DMA queue
>   * @vb: ptr to vb2_buffer
>   *
> - * This callback fucntion queues the buffer to DMA engine
> + * This callback function queues the buffer to DMA engine
>   */
>  static void vpif_buffer_queue(struct vb2_buffer *vb)
>  {
> @@ -635,7 +635,7 @@ static int vpif_try_fmt_vid_out(struct file *file, void *priv,
>  	struct v4l2_pix_format *pixfmt = &fmt->fmt.pix;
>  
>  	/*
> -	 * to supress v4l-compliance warnings silently correct
> +	 * to suppress v4l-compliance warnings silently correct
>  	 * the pixelformat
>  	 */
>  	if (pixfmt->pixelformat != V4L2_PIX_FMT_YUV422P)
> diff --git a/drivers/media/platform/exynos4-is/fimc-is-command.h b/drivers/media/platform/exynos4-is/fimc-is-command.h
> index 0d1f52e394b1..b06b56b890d5 100644
> --- a/drivers/media/platform/exynos4-is/fimc-is-command.h
> +++ b/drivers/media/platform/exynos4-is/fimc-is-command.h
> @@ -18,7 +18,7 @@
>  
>  #define FIMC_IS_COMMAND_VER	110 /* FIMC-IS command set version 1.10 */
>  
> -/* Enumeration of commands beetween the FIMC-IS and the host processor. */
> +/* Enumeration of commands between the FIMC-IS and the host processor. */
>  
>  /* HOST to FIMC-IS */
>  #define HIC_PREVIEW_STILL	0x0001
> diff --git a/drivers/media/platform/exynos4-is/fimc-is-param.h b/drivers/media/platform/exynos4-is/fimc-is-param.h
> index 8e31f7642776..22923a3d405e 100644
> --- a/drivers/media/platform/exynos4-is/fimc-is-param.h
> +++ b/drivers/media/platform/exynos4-is/fimc-is-param.h
> @@ -298,7 +298,7 @@ enum isp_af_mode {
>  #define ISP_FLASH_COMMAND_AUTO			2
>  #define ISP_FLASH_COMMAND_TORCH			3 /* 3 sec */
>  
> -/* Flash red-eye commads */
> +/* Flash red-eye commands */
>  #define ISP_FLASH_REDEYE_DISABLE		0
>  #define ISP_FLASH_REDEYE_ENABLE			1
>  
> diff --git a/drivers/media/platform/exynos4-is/media-dev.h b/drivers/media/platform/exynos4-is/media-dev.h
> index 9f527670395a..a7c9490bbcb4 100644
> --- a/drivers/media/platform/exynos4-is/media-dev.h
> +++ b/drivers/media/platform/exynos4-is/media-dev.h
> @@ -79,7 +79,7 @@ struct fimc_camclk_info {
>  
>  /**
>   * struct fimc_sensor_info - image data source subdev information
> - * @pdata: sensor's atrributes passed as media device's platform data
> + * @pdata: sensor's attributes passed as media device's platform data
>   * @asd: asynchronous subdev registration data structure
>   * @subdev: image sensor v4l2 subdev
>   * @host: fimc device the sensor is currently linked to
> diff --git a/drivers/media/platform/exynos4-is/mipi-csis.c b/drivers/media/platform/exynos4-is/mipi-csis.c
> index 35cb0162085b..234e047e3e8f 100644
> --- a/drivers/media/platform/exynos4-is/mipi-csis.c
> +++ b/drivers/media/platform/exynos4-is/mipi-csis.c
> @@ -183,7 +183,7 @@ struct csis_drvdata {
>   * @index: the hardware instance index
>   * @pdev: CSIS platform device
>   * @phy: pointer to the CSIS generic PHY
> - * @regs: mmaped I/O registers memory
> + * @regs: mmapped I/O registers memory
>   * @supplies: CSIS regulator supplies
>   * @clock: CSIS clocks
>   * @irq: requested s5p-mipi-csis irq number
> @@ -745,7 +745,7 @@ static int s5pcsis_parse_dt(struct platform_device *pdev,
>  		goto err;
>  	}
>  
> -	/* Get MIPI CSI-2 bus configration from the endpoint node. */
> +	/* Get MIPI CSI-2 bus configuration from the endpoint node. */
>  	of_property_read_u32(node, "samsung,csis-hs-settle",
>  					&state->hs_settle);
>  	state->wclk_ext = of_property_read_bool(node,
> diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c
> index 70a2833db0d1..af76eb637773 100644
> --- a/drivers/media/platform/marvell-ccic/mmp-driver.c
> +++ b/drivers/media/platform/marvell-ccic/mmp-driver.c
> @@ -240,8 +240,8 @@ static void mmpcam_calc_dphy(struct mcam_camera *mcam)
>  	 *  bit 8 ~ bit 15: HS_SETTLE
>  	 *   Time interval during which the HS
>  	 *   receiver shall ignore any Data Lane
> -	 *   HS transistions.
> -	 *   The vaule has been calibrated on
> +	 *   HS transitions.
> +	 *   The value has been calibrated on
>  	 *   different boards. It seems to work well.
>  	 *
>  	 *  More detail please refer
> diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_core.h b/drivers/media/platform/mtk-mdp/mtk_mdp_core.h
> index ad1cff306efd..e5abb1abb3a3 100644
> --- a/drivers/media/platform/mtk-mdp/mtk_mdp_core.h
> +++ b/drivers/media/platform/mtk-mdp/mtk_mdp_core.h
> @@ -41,7 +41,7 @@
>  #define MTK_MDP_CTX_ERROR		BIT(5)
>  
>  /**
> - *  struct mtk_mdp_pix_align - alignement of image
> + *  struct mtk_mdp_pix_align - alignment of image
>   *  @org_w: source alignment of width
>   *  @org_h: source alignment of height
>   *  @target_w: dst alignment of width
> @@ -122,8 +122,8 @@ struct mtk_mdp_frame {
>  /**
>   * struct mtk_mdp_variant - image processor variant information
>   * @pix_max:		maximum limit of image size
> - * @pix_min:		minimun limit of image size
> - * @pix_align:		alignement of image
> + * @pix_min:		minimum limit of image size
> + * @pix_align:		alignment of image
>   * @h_scale_up_max:	maximum scale-up in horizontal
>   * @v_scale_up_max:	maximum scale-up in vertical
>   * @h_scale_down_max:	maximum scale-down in horizontal
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
> index ba619647bc10..794aba685120 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
> @@ -1170,7 +1170,7 @@ static void vb2ops_vdec_buf_queue(struct vb2_buffer *vb)
>  	ret = vdec_if_decode(ctx, &src_mem, NULL, &res_chg);
>  	if (ret || !res_chg) {
>  		/*
> -		 * fb == NULL menas to parse SPS/PPS header or
> +		 * fb == NULL means to parse SPS/PPS header or
>  		 * resolution info in src_mem. Decode can fail
>  		 * if there is no SPS header or picture info
>  		 * in bs
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> index 8aba69555b12..e7e2a108def9 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> @@ -151,9 +151,9 @@ struct mtk_q_data {
>   * @intra_period: I frame period
>   * @gop_size: group of picture size, it's used as the intra frame period
>   * @framerate_num: frame rate numerator. ex: framerate_num=30 and
> - *		   framerate_denom=1 menas FPS is 30
> + *		   framerate_denom=1 means FPS is 30
>   * @framerate_denom: frame rate denominator. ex: framerate_num=30 and
> - *		     framerate_denom=1 menas FPS is 30
> + *		     framerate_denom=1 means FPS is 30
>   * @h264_max_qp: Max value for H.264 quantization parameter
>   * @h264_profile: V4L2 defined H.264 profile
>   * @h264_level: V4L2 defined H.264 level
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
> index d1f12257bf66..2af654240d96 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
> @@ -393,7 +393,7 @@ static void mtk_venc_set_param(struct mtk_vcodec_ctx *ctx,
>  		param->input_yuv_fmt = VENC_YUV_FORMAT_NV21;
>  		break;
>  	default:
> -		mtk_v4l2_err("Unsupport fourcc =%d", q_data_src->fmt->fourcc);
> +		mtk_v4l2_err("Unsupported fourcc =%d", q_data_src->fmt->fourcc);
>  		break;
>  	}
>  	param->h264_profile = enc_params->h264_profile;
> diff --git a/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c b/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c
> index aa3ce41898bc..02c960c63ac0 100644
> --- a/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c
> +++ b/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c
> @@ -55,7 +55,7 @@ struct h264_fb {
>  
>  /**
>   * struct h264_ring_fb_list - ring frame buffer list
> - * @fb_list   : frame buffer arrary
> + * @fb_list   : frame buffer array
>   * @read_idx  : read index
>   * @write_idx : write index
>   * @count     : buffer count in list
> @@ -72,7 +72,7 @@ struct h264_ring_fb_list {
>  /**
>   * struct vdec_h264_dec_info - decode information
>   * @dpb_sz		: decoding picture buffer size
> - * @resolution_changed  : resoltion change happen
> + * @resolution_changed  : resolution change happen
>   * @realloc_mv_buf	: flag to notify driver to re-allocate mv buffer
>   * @reserved		: for 8 bytes alignment
>   * @bs_dma		: Input bit-stream buffer dma address
> diff --git a/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c b/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c
> index 3e84a761db3a..bac3723038de 100644
> --- a/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c
> +++ b/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c
> @@ -120,7 +120,7 @@ struct vdec_vp8_hw_reg_base {
>  /**
>   * struct vdec_vp8_vpu_inst - VPU instance for VP8 decode
>   * @wq_hd	: Wait queue to wait VPU message ack
> - * @signaled	: 1 - Host has received ack message from VPU, 0 - not recevie
> + * @signaled	: 1 - Host has received ack message from VPU, 0 - not receive
>   * @failure	: VPU execution result status 0 - success, others - fail
>   * @inst_addr	: VPU decoder instance address
>   */
> diff --git a/drivers/media/platform/mtk-vcodec/vdec_drv_if.h b/drivers/media/platform/mtk-vcodec/vdec_drv_if.h
> index ded1154481cd..9a21591f3818 100644
> --- a/drivers/media/platform/mtk-vcodec/vdec_drv_if.h
> +++ b/drivers/media/platform/mtk-vcodec/vdec_drv_if.h
> @@ -80,7 +80,7 @@ void vdec_if_deinit(struct mtk_vcodec_ctx *ctx);
>   * vdec_if_decode() - trigger decode
>   * @ctx	: [in] v4l2 context
>   * @bs	: [in] input bitstream
> - * @fb	: [in] frame buffer to store decoded frame, when null menas parse
> + * @fb	: [in] frame buffer to store decoded frame, when null means parse
>   *	header only
>   * @res_chg	: [out] resolution change happens if current bs have different
>   *	picture width/height
> diff --git a/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h b/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h
> index cd37bb2a610f..79d8eac7f5e2 100644
> --- a/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h
> +++ b/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h
> @@ -62,7 +62,7 @@ int vpu_dec_start(struct vdec_vpu_inst *vpu, uint32_t *data, unsigned int len);
>  /**
>   * vpu_dec_end - end decoding, basically the function will be invoked once
>   *               when HW decoding done interrupt received successfully. The
> - *               decoder in VPU will continute to do referene frame management
> + *               decoder in VPU will continue to do reference frame management
>   *               and check if there is a new decoded frame available to display.
>   *
>   * @vpu : instance for vdec_vpu_inst
> diff --git a/drivers/media/platform/omap/omap_vout.c b/drivers/media/platform/omap/omap_vout.c
> index ff3de2dce5a2..37f0d7146dfa 100644
> --- a/drivers/media/platform/omap/omap_vout.c
> +++ b/drivers/media/platform/omap/omap_vout.c
> @@ -1129,7 +1129,7 @@ static int vidioc_s_fmt_vid_out(struct file *file, void *fh,
>  	}
>  	timing = &dssdev->panel.timings;
>  
> -	/* We dont support RGB24-packed mode if vrfb rotation
> +	/* We don't support RGB24-packed mode if vrfb rotation
>  	 * is enabled*/
>  	if ((is_rotation_enabled(vout)) &&
>  			f->fmt.pix.pixelformat == V4L2_PIX_FMT_RGB24) {
> @@ -1147,7 +1147,7 @@ static int vidioc_s_fmt_vid_out(struct file *file, void *fh,
>  		vout->fbuf.fmt.width = timing->x_res;
>  	}
>  
> -	/* change to samller size is OK */
> +	/* change to smaller size is OK */
>  
>  	bpp = omap_vout_try_format(&f->fmt.pix);
>  	f->fmt.pix.sizeimage = f->fmt.pix.width * f->fmt.pix.height * bpp;
> diff --git a/drivers/media/platform/omap/omap_voutdef.h b/drivers/media/platform/omap/omap_voutdef.h
> index 56b630b1c8b4..c740393c8509 100644
> --- a/drivers/media/platform/omap/omap_voutdef.h
> +++ b/drivers/media/platform/omap/omap_voutdef.h
> @@ -37,7 +37,7 @@
>  #define VID_MAX_WIDTH		1280	/* Largest width */
>  #define VID_MAX_HEIGHT		720	/* Largest height */
>  
> -/* Mimimum requirement is 2x2 for DSS */
> +/* Minimum requirement is 2x2 for DSS */
>  #define VID_MIN_WIDTH		2
>  #define VID_MIN_HEIGHT		2
>  
> @@ -135,7 +135,7 @@ struct omap_vout_device {
>  	enum omap_color_mode dss_mode;
>  
>  	/* we don't allow to request new buffer when old buffers are
> -	 * still mmaped
> +	 * still mmapped
>  	 */
>  	int mmap_count;
>  
> diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c
> index 13f2828d880d..bd57174d81a7 100644
> --- a/drivers/media/platform/omap3isp/isp.c
> +++ b/drivers/media/platform/omap3isp/isp.c
> @@ -1517,7 +1517,7 @@ void omap3isp_print_status(struct isp_device *isp)
>   *
>   * To solve this problem power management support is split into prepare/complete
>   * and suspend/resume operations. The pipelines are stopped in prepare() and the
> - * ISP clocks get disabled in suspend(). Similarly, the clocks are reenabled in
> + * ISP clocks get disabled in suspend(). Similarly, the clocks are re-enabled in
>   * resume(), and the the pipelines are restarted in complete().
>   *
>   * TODO: PM dependencies between the ISP and sensors are not modelled explicitly
> diff --git a/drivers/media/platform/omap3isp/ispccdc.c b/drivers/media/platform/omap3isp/ispccdc.c
> index 14a1c24037c4..261ad1175f98 100644
> --- a/drivers/media/platform/omap3isp/ispccdc.c
> +++ b/drivers/media/platform/omap3isp/ispccdc.c
> @@ -1594,7 +1594,7 @@ static int ccdc_isr_buffer(struct isp_ccdc_device *ccdc)
>  		return 0;
>  
>  	/* We're in continuous mode, and memory writes were disabled due to a
> -	 * buffer underrun. Reenable them now that we have a buffer. The buffer
> +	 * buffer underrun. Re-enable them now that we have a buffer. The buffer
>  	 * address has been set in ccdc_video_queue.
>  	 */
>  	if (ccdc->state == ISP_PIPELINE_STREAM_CONTINUOUS && ccdc->underrun) {
> @@ -1712,7 +1712,7 @@ static void ccdc_vd1_isr(struct isp_ccdc_device *ccdc)
>  	 * data to memory the CCDC and LSC are stopped immediately but
>  	 * without change the CCDC stopping state machine. The CCDC
>  	 * stopping state machine should be used only when user request
> -	 * for stopping is received (SINGLESHOT is an exeption).
> +	 * for stopping is received (SINGLESHOT is an exception).
>  	 */
>  	switch (ccdc->state) {
>  	case ISP_PIPELINE_STREAM_SINGLESHOT:
> diff --git a/drivers/media/platform/omap3isp/ispcsi2.c b/drivers/media/platform/omap3isp/ispcsi2.c
> index 9c180f607bcb..da66ea65be5d 100644
> --- a/drivers/media/platform/omap3isp/ispcsi2.c
> +++ b/drivers/media/platform/omap3isp/ispcsi2.c
> @@ -710,7 +710,7 @@ static void csi2_isr_ctx(struct isp_csi2_device *csi2,
>  
>  	/* Skip interrupts until we reach the frame skip count. The CSI2 will be
>  	 * automatically disabled, as the frame skip count has been programmed
> -	 * in the CSI2_CTx_CTRL1::COUNT field, so reenable it.
> +	 * in the CSI2_CTx_CTRL1::COUNT field, so re-enable it.
>  	 *
>  	 * It would have been nice to rely on the FRAME_NUMBER interrupt instead
>  	 * but it turned out that the interrupt is only generated when the CSI2
> diff --git a/drivers/media/platform/pxa_camera.c b/drivers/media/platform/pxa_camera.c
> index 3cf3c6390cc8..4fe228752a43 100644
> --- a/drivers/media/platform/pxa_camera.c
> +++ b/drivers/media/platform/pxa_camera.c
> @@ -1631,7 +1631,7 @@ static int pxa_camera_set_bus_param(struct pxa_camera_dev *pcdev)
>  
>  	pcdev->channels = 1;
>  
> -	/* Make choises, based on platform preferences */
> +	/* Make choices, based on platform preferences */
>  	if ((common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) &&
>  	    (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) {
>  		if (pcdev->platform_flags & PXA_CAMERA_HSP)
> diff --git a/drivers/media/platform/qcom/venus/core.h b/drivers/media/platform/qcom/venus/core.h
> index 79c7e816c706..7a3feb5cee00 100644
> --- a/drivers/media/platform/qcom/venus/core.h
> +++ b/drivers/media/platform/qcom/venus/core.h
> @@ -219,7 +219,7 @@ struct venus_buffer {
>  #define to_venus_buffer(ptr)	container_of(ptr, struct venus_buffer, vb)
>  
>  /**
> - * struct venus_inst - holds per instance paramerters
> + * struct venus_inst - holds per instance parameters
>   *
>   * @list:	used for attach an instance to the core
>   * @lock:	instance lock
> diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
> index beb9248992a4..2207a31d355e 100644
> --- a/drivers/media/platform/rcar-vin/rcar-dma.c
> +++ b/drivers/media/platform/rcar-vin/rcar-dma.c
> @@ -681,7 +681,7 @@ static int rvin_setup(struct rvin_dev *vin)
>  		break;
>  	}
>  
> -	/* Enable VSYNC Field Toogle mode after one VSYNC input */
> +	/* Enable VSYNC Field Toggle mode after one VSYNC input */
>  	if (vin->info->model == RCAR_GEN3)
>  		dmr2 = VNDMR2_FTEV;
>  	else
> diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
> index 7a2851790b91..7cbdcbf9b090 100644
> --- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
> +++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
> @@ -665,7 +665,7 @@ static void rvin_mc_try_format(struct rvin_dev *vin,
>  	 * The V4L2 specification clearly documents the colorspace fields
>  	 * as being set by drivers for capture devices. Using the values
>  	 * supplied by userspace thus wouldn't comply with the API. Until
> -	 * the API is updated force fixed vaules.
> +	 * the API is updated force fixed values.
>  	 */
>  	pix->colorspace = RVIN_DEFAULT_COLORSPACE;
>  	pix->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(pix->colorspace);
> @@ -964,7 +964,7 @@ void rvin_v4l2_unregister(struct rvin_dev *vin)
>  	v4l2_info(&vin->v4l2_dev, "Removing %s\n",
>  		  video_device_node_name(&vin->vdev));
>  
> -	/* Checks internaly if vdev have been init or not */
> +	/* Checks internally if vdev have been init or not */
>  	video_unregister_device(&vin->vdev);
>  }
>  
> diff --git a/drivers/media/platform/rockchip/rga/rga-hw.c b/drivers/media/platform/rockchip/rga/rga-hw.c
> index 96d1b1b3fe8e..843e50d17a72 100644
> --- a/drivers/media/platform/rockchip/rga/rga-hw.c
> +++ b/drivers/media/platform/rockchip/rga/rga-hw.c
> @@ -256,7 +256,7 @@ static void rga_cmd_set_trans_info(struct rga_ctx *ctx)
>  	}
>  
>  	/*
> -	 * Cacluate the up/down scaling mode/factor.
> +	 * Calculate the up/down scaling mode/factor.
>  	 *
>  	 * RGA used to scale the picture first, and then rotate second,
>  	 * so we need to swap the w/h when rotate degree is 90/270.
> @@ -304,7 +304,7 @@ static void rga_cmd_set_trans_info(struct rga_ctx *ctx)
>  	}
>  
>  	/*
> -	 * Cacluate the framebuffer virtual strides and active size,
> +	 * Calculate the framebuffer virtual strides and active size,
>  	 * note that the step of vir_stride / vir_width is 4 byte words
>  	 */
>  	src_vir_info.data.vir_stride = ctx->in.stride >> 2;
> @@ -318,7 +318,7 @@ static void rga_cmd_set_trans_info(struct rga_ctx *ctx)
>  	dst_act_info.data.act_width = dst_w - 1;
>  
>  	/*
> -	 * Cacluate the source framebuffer base address with offset pixel.
> +	 * Calculate the source framebuffer base address with offset pixel.
>  	 */
>  	src_offsets = rga_get_addr_offset(&ctx->in, src_x, src_y,
>  					  src_w, src_h);
> diff --git a/drivers/media/platform/s3c-camif/camif-core.h b/drivers/media/platform/s3c-camif/camif-core.h
> index 1f5c8c94ce89..be5e7357dffc 100644
> --- a/drivers/media/platform/s3c-camif/camif-core.h
> +++ b/drivers/media/platform/s3c-camif/camif-core.h
> @@ -260,7 +260,7 @@ struct camif_vp {
>   * @clock:	  clocks required for the CAMIF operation
>   * @lock:	  mutex protecting this data structure
>   * @slock:	  spinlock protecting CAMIF registers
> - * @io_base:	  start address of the mmaped CAMIF registers
> + * @io_base:	  start address of the mmapped CAMIF registers
>   */
>  struct camif_dev {
>  	struct media_device		media_dev;
> diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.h b/drivers/media/platform/s5p-jpeg/jpeg-core.h
> index 90fda4b720eb..144c102ff05f 100644
> --- a/drivers/media/platform/s5p-jpeg/jpeg-core.h
> +++ b/drivers/media/platform/s5p-jpeg/jpeg-core.h
> @@ -153,7 +153,7 @@ struct s5p_jpeg_variant {
>  
>  /**
>   * struct jpeg_fmt - driver's internal color format data
> - * @name:	format descritpion
> + * @name:	format description
>   * @fourcc:	the fourcc code, 0 if not applicable
>   * @depth:	number of bits per pixel
>   * @colplanes:	number of color planes (1 for packed formats)
> @@ -193,7 +193,7 @@ struct s5p_jpeg_marker {
>   * @sos:	SOS marker's position relative to the buffer beginning
>   * @dht:	DHT markers' positions relative to the buffer beginning
>   * @dqt:	DQT markers' positions relative to the buffer beginning
> - * @sof:	SOF0 marker's postition relative to the buffer beginning
> + * @sof:	SOF0 marker's position relative to the buffer beginning
>   * @sof_len:	SOF0 marker's payload length (without length field itself)
>   * @components:	number of image components
>   * @size:	image buffer size in bytes
> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
> index 20442a9b9f7a..24148020baa9 100644
> --- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
> @@ -268,7 +268,7 @@ struct s5p_mfc_priv_buf {
>   * @enc_ctrl_handler:	control framework handler for encoding
>   * @pm:			power management control
>   * @variant:		MFC hardware variant information
> - * @num_inst:		couter of active MFC instances
> + * @num_inst:		counter of active MFC instances
>   * @irqlock:		lock for operations on videobuf2 queues
>   * @condlock:		lock for changing/checking if a context is ready to be
>   *			processed
> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
> index ee7b15b335e0..9f832ba7bc8c 100644
> --- a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
> @@ -51,7 +51,7 @@ int s5p_mfc_load_firmware(struct s5p_mfc_dev *dev)
>  	struct firmware *fw_blob;
>  	int i, err = -EINVAL;
>  
> -	/* Firmare has to be present as a separate file or compiled
> +	/* Firmware has to be present as a separate file or compiled
>  	 * into kernel. */
>  	mfc_debug_enter();
>  
> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
> index f4c0e3a8f27d..e111f9c47179 100644
> --- a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
> @@ -602,7 +602,7 @@ static int vidioc_querybuf(struct file *file, void *priv,
>  	int i;
>  
>  	if (buf->memory != V4L2_MEMORY_MMAP) {
> -		mfc_err("Only mmaped buffers can be used\n");
> +		mfc_err("Only mmapped buffers can be used\n");
>  		return -EINVAL;
>  	}
>  	mfc_debug(2, "State: %d, buf->type: %d\n", ctx->state, buf->type);
> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c
> index 0913881219ff..6144e95f6425 100644
> --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c
> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c
> @@ -1293,7 +1293,7 @@ static int s5p_mfc_run_init_dec_buffers(struct s5p_mfc_ctx *ctx)
>  	 * First set the output frame buffers
>  	 */
>  	if (ctx->capture_state != QUEUE_BUFS_MMAPED) {
> -		mfc_err("It seems that not all destination buffers were mmaped\nMFC requires that all destination are mmaped before starting processing\n");
> +		mfc_err("It seems that not all destination buffers were mmapped\nMFC requires that all destination are mmapped before starting processing\n");
>  		return -EAGAIN;
>  	}
>  	if (list_empty(&ctx->src_queue)) {
> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
> index 7c629be43205..281699ab7fe1 100644
> --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
> @@ -53,7 +53,7 @@ static int s5p_mfc_alloc_dec_temp_buffers_v6(struct s5p_mfc_ctx *ctx)
>  	return 0;
>  }
>  
> -/* Release temproary buffers for decoding */
> +/* Release temporary buffers for decoding */
>  static void s5p_mfc_release_dec_desc_buffer_v6(struct s5p_mfc_ctx *ctx)
>  {
>  	/* NOP */
> @@ -1928,7 +1928,7 @@ static inline int s5p_mfc_run_init_dec_buffers(struct s5p_mfc_ctx *ctx)
>  
>  	if (ctx->capture_state != QUEUE_BUFS_MMAPED) {
>  		mfc_err("It seems that not all destination buffers were\n"
> -			"mmaped.MFC requires that all destination are mmaped\n"
> +			"mmapped.MFC requires that all destination are mmapped\n"
>  			"before starting processing.\n");
>  		return -EAGAIN;
>  	}
> diff --git a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h
> index 3dbb3a287cc0..c9d6021904cd 100644
> --- a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h
> +++ b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h
> @@ -193,7 +193,7 @@ struct c8sectpfei {
>  #define C8SECTPFE_SYS_ENABLE             BIT(0)
>  
>  /*
> - * Ponter record data structure required for each input block
> + * Pointer record data structure required for each input block
>   * see Table 82 on page 167 of functional specification.
>   */
>  
> diff --git a/drivers/media/platform/sti/delta/delta.h b/drivers/media/platform/sti/delta/delta.h
> index 2ba99922c05b..914556030e70 100644
> --- a/drivers/media/platform/sti/delta/delta.h
> +++ b/drivers/media/platform/sti/delta/delta.h
> @@ -286,7 +286,7 @@ struct delta_dec {
>  	 * Header parsing must be done using decode(), giving
>  	 * explicitly header access unit or first access unit of bitstream.
>  	 * If no valid header is found, get_streaminfo will return -ENODATA,
> -	 * in this case the next bistream access unit must be decoded till
> +	 * in this case the next bitstream access unit must be decoded till
>  	 * get_streaminfo becomes successful.
>  	 */
>  	int (*get_streaminfo)(struct delta_ctx *ctx,
> diff --git a/drivers/media/platform/sti/hva/hva-h264.c b/drivers/media/platform/sti/hva/hva-h264.c
> index b61a5d337d2a..c34f7cf5aed2 100644
> --- a/drivers/media/platform/sti/hva/hva-h264.c
> +++ b/drivers/media/platform/sti/hva/hva-h264.c
> @@ -626,7 +626,7 @@ static int hva_h264_prepare_task(struct hva_ctx *pctx,
>  	td->frame_width = frame_width;
>  	td->frame_height = frame_height;
>  
> -	/* set frame alignement */
> +	/* set frame alignment */
>  	td->window_width =  frame_width;
>  	td->window_height = frame_height;
>  	td->window_horizontal_offset = 0;
> diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
> index 6732874114cf..5fe5b38fa901 100644
> --- a/drivers/media/platform/stm32/stm32-dcmi.c
> +++ b/drivers/media/platform/stm32/stm32-dcmi.c
> @@ -1544,7 +1544,7 @@ static void dcmi_graph_notify_unbind(struct v4l2_async_notifier *notifier,
>  
>  	dev_dbg(dcmi->dev, "Removing %s\n", video_device_node_name(dcmi->vdev));
>  
> -	/* Checks internaly if vdev has been init or not */
> +	/* Checks internally if vdev has been init or not */
>  	video_unregister_device(dcmi->vdev);
>  }
>  
> diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h
> index 0bb000712c33..85f97d4f086e 100644
> --- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h
> +++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h
> @@ -65,7 +65,7 @@ bool sun6i_csi_is_format_supported(struct sun6i_csi *csi, u32 pixformat,
>  int sun6i_csi_set_power(struct sun6i_csi *csi, bool enable);
>  
>  /**
> - * sun6i_csi_update_config() - update the csi register setttings
> + * sun6i_csi_update_config() - update the csi register settings
>   * @csi:	pointer to the csi
>   * @config:	see struct sun6i_csi_config
>   */
> diff --git a/drivers/media/platform/ti-vpe/vpdma.c b/drivers/media/platform/ti-vpe/vpdma.c
> index e2cf2b90e500..1da2cb3aaf0c 100644
> --- a/drivers/media/platform/ti-vpe/vpdma.c
> +++ b/drivers/media/platform/ti-vpe/vpdma.c
> @@ -404,7 +404,7 @@ EXPORT_SYMBOL(vpdma_map_desc_buf);
>  
>  /*
>   * unmap descriptor/payload DMA buffer, disabling DMA access and
> - * allowing the main processor to acces the data
> + * allowing the main processor to access the data
>   */
>  void vpdma_unmap_desc_buf(struct vpdma_data *vpdma, struct vpdma_buf *buf)
>  {
> @@ -501,7 +501,7 @@ void vpdma_reset_desc_list(struct vpdma_desc_list *list)
>  EXPORT_SYMBOL(vpdma_reset_desc_list);
>  
>  /*
> - * free the buffer allocated fot the VPDMA descriptor list, this should be
> + * free the buffer allocated for the VPDMA descriptor list, this should be
>   * called when the user doesn't want to use VPDMA any more.
>   */
>  void vpdma_free_desc_list(struct vpdma_desc_list *list)
> @@ -790,7 +790,7 @@ static void dump_dtd(struct vpdma_dtd *dtd)
>   * append an outbound data transfer descriptor to the given descriptor list,
>   * this sets up a 'client to memory' VPDMA transfer for the given VPDMA channel
>   *
> - * @list: vpdma desc list to which we add this decriptor
> + * @list: vpdma desc list to which we add this descriptor
>   * @width: width of the image in pixels in memory
>   * @c_rect: compose params of output image
>   * @fmt: vpdma data format of the buffer
> @@ -798,7 +798,7 @@ static void dump_dtd(struct vpdma_dtd *dtd)
>   * max_width: enum for maximum width of data transfer
>   * max_height: enum for maximum height of data transfer
>   * chan: VPDMA channel
> - * flags: VPDMA flags to configure some descriptor fileds
> + * flags: VPDMA flags to configure some descriptor fields
>   */
>  void vpdma_add_out_dtd(struct vpdma_desc_list *list, int width,
>  		int stride, const struct v4l2_rect *c_rect,
> @@ -863,14 +863,14 @@ EXPORT_SYMBOL(vpdma_rawchan_add_out_dtd);
>   * append an inbound data transfer descriptor to the given descriptor list,
>   * this sets up a 'memory to client' VPDMA transfer for the given VPDMA channel
>   *
> - * @list: vpdma desc list to which we add this decriptor
> + * @list: vpdma desc list to which we add this descriptor
>   * @width: width of the image in pixels in memory(not the cropped width)
>   * @c_rect: crop params of input image
>   * @fmt: vpdma data format of the buffer
>   * dma_addr: dma address as seen by VPDMA
>   * chan: VPDMA channel
>   * field: top or bottom field info of the input image
> - * flags: VPDMA flags to configure some descriptor fileds
> + * flags: VPDMA flags to configure some descriptor fields
>   * frame_width/height: the complete width/height of the image presented to the
>   *			client (this makes sense when multiple channels are
>   *			connected to the same client, forming a larger frame)
> @@ -1008,7 +1008,7 @@ unsigned int vpdma_get_list_mask(struct vpdma_data *vpdma, int irq_num)
>  }
>  EXPORT_SYMBOL(vpdma_get_list_mask);
>  
> -/* clear previosuly occured list intterupts in the LIST_STAT register */
> +/* clear previously occurred list interupts in the LIST_STAT register */
>  void vpdma_clear_list_stat(struct vpdma_data *vpdma, int irq_num,
>  			   int list_num)
>  {
> diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
> index d70871d0ad2d..207e7e76c048 100644
> --- a/drivers/media/platform/ti-vpe/vpe.c
> +++ b/drivers/media/platform/ti-vpe/vpe.c
> @@ -876,7 +876,7 @@ static int set_srcdst_params(struct vpe_ctx *ctx)
>  		/*
>  		 * we make sure that the source image has a 16 byte aligned
>  		 * stride, we need to do the same for the motion vector buffer
> -		 * by aligning it's stride to the next 16 byte boundry. this
> +		 * by aligning it's stride to the next 16 byte boundary. this
>  		 * extra space will not be used by the de-interlacer, but will
>  		 * ensure that vpdma operates correctly
>  		 */
> diff --git a/drivers/media/platform/vsp1/vsp1_brx.c b/drivers/media/platform/vsp1/vsp1_brx.c
> index 5e50178b057d..58ad248cd7f7 100644
> --- a/drivers/media/platform/vsp1/vsp1_brx.c
> +++ b/drivers/media/platform/vsp1/vsp1_brx.c
> @@ -296,7 +296,7 @@ static void brx_configure_stream(struct vsp1_entity *entity,
>  	/*
>  	 * The hardware is extremely flexible but we have no userspace API to
>  	 * expose all the parameters, nor is it clear whether we would have use
> -	 * cases for all the supported modes. Let's just harcode the parameters
> +	 * cases for all the supported modes. Let's just hardcode the parameters
>  	 * to sane default values for now.
>  	 */
>  
> @@ -373,7 +373,7 @@ static void brx_configure_stream(struct vsp1_entity *entity,
>  		vsp1_brx_write(brx, dlb, VI6_BRU_CTRL(i), ctrl);
>  
>  		/*
> -		 * Harcode the blending formula to
> +		 * Hardcode the blending formula to
>  		 *
>  		 *	DSTc = DSTc * (1 - SRCa) + SRCc * SRCa
>  		 *	DSTa = DSTa * (1 - SRCa) + SRCa
> diff --git a/drivers/media/platform/xilinx/xilinx-vip.c b/drivers/media/platform/xilinx/xilinx-vip.c
> index 18f98838111b..08a825c3a3f6 100644
> --- a/drivers/media/platform/xilinx/xilinx-vip.c
> +++ b/drivers/media/platform/xilinx/xilinx-vip.c
> @@ -166,7 +166,7 @@ EXPORT_SYMBOL_GPL(xvip_set_format_size);
>   * the register, otherwise the bitmask is cleared from the register
>   * when the flag @set is false.
>   *
> - * Fox eample, this function can be used to set a control with a boolean value
> + * Fox example, this function can be used to set a control with a boolean value
>   * requested by users. If the caller knows whether to set or clear in the first
>   * place, the caller should call xvip_clr() or xvip_set() directly instead of
>   * using this function.
> -- 
> 2.20.1
> 

-- 
Regards,
Niklas Söderlund

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel