Re: [PATCH 06/14] media: platform: fix several typos

[Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>]

Hi again,

W dniu 19.02.2019 o 13:17, Andrzej Pietrasiewicz pisze:
> Hi Mauro,
> 
> 
> W dniu 18.02.2019 o 20:29, Mauro Carvalho Chehab pisze:
>> Use codespell to fix lots of typos over frontends.
>>
>> Manually verified to avoid false-positives.
>>
>> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
> 

I meant
> for drivers/media/platform/sp5-jpeg.c:

for drivers/media/platform/sp5-jpeg/*

Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>

> 
>> ---
>>   drivers/media/platform/Kconfig                     |  2 +-
>>   drivers/media/platform/atmel/atmel-isi.c           |  4 ++--
>>   drivers/media/platform/coda/coda-jpeg.c            |  2 +-
>>   drivers/media/platform/davinci/isif.c              |  4 ++--
>>   drivers/media/platform/davinci/vpbe.c              |  2 +-
>>   drivers/media/platform/davinci/vpif.c              |  2 +-
>>   drivers/media/platform/davinci/vpif_display.c      |  4 ++--
>>   .../media/platform/exynos4-is/fimc-is-command.h    |  2 +-
>>   drivers/media/platform/exynos4-is/fimc-is-param.h  |  2 +-
>>   drivers/media/platform/exynos4-is/media-dev.h      |  2 +-
>>   drivers/media/platform/exynos4-is/mipi-csis.c      |  4 ++--
>>   drivers/media/platform/marvell-ccic/mmp-driver.c   |  4 ++--
>>   drivers/media/platform/mtk-mdp/mtk_mdp_core.h      |  6 +++---
>>   drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c |  2 +-
>>   drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h |  4 ++--
>>   drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c |  2 +-
>>   .../media/platform/mtk-vcodec/vdec/vdec_h264_if.c  |  4 ++--
>>   .../media/platform/mtk-vcodec/vdec/vdec_vp8_if.c   |  2 +-
>>   drivers/media/platform/mtk-vcodec/vdec_drv_if.h    |  2 +-
>>   drivers/media/platform/mtk-vcodec/vdec_vpu_if.h    |  2 +-
>>   drivers/media/platform/omap/omap_vout.c            |  4 ++--
>>   drivers/media/platform/omap/omap_voutdef.h         |  4 ++--
>>   drivers/media/platform/omap3isp/isp.c              |  2 +-
>>   drivers/media/platform/omap3isp/ispccdc.c          |  4 ++--
>>   drivers/media/platform/omap3isp/ispcsi2.c          |  2 +-
>>   drivers/media/platform/pxa_camera.c                |  2 +-
>>   drivers/media/platform/qcom/venus/core.h           |  2 +-
>>   drivers/media/platform/rcar-vin/rcar-dma.c         |  2 +-
>>   drivers/media/platform/rcar-vin/rcar-v4l2.c        |  4 ++--
>>   drivers/media/platform/rockchip/rga/rga-hw.c       |  6 +++---
>>   drivers/media/platform/s3c-camif/camif-core.h      |  2 +-
>>   drivers/media/platform/s5p-jpeg/jpeg-core.h        |  4 ++--
>>   drivers/media/platform/s5p-mfc/s5p_mfc_common.h    |  2 +-
>>   drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c      |  2 +-
>>   drivers/media/platform/s5p-mfc/s5p_mfc_dec.c       |  2 +-
>>   drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c    |  2 +-
>>   drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c    |  4 ++--
>>   .../media/platform/sti/c8sectpfe/c8sectpfe-core.h  |  2 +-
>>   drivers/media/platform/sti/delta/delta.h           |  2 +-
>>   drivers/media/platform/sti/hva/hva-h264.c          |  2 +-
>>   drivers/media/platform/stm32/stm32-dcmi.c          |  2 +-
>>   drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h |  2 +-
>>   drivers/media/platform/ti-vpe/vpdma.c              | 14 +++++++-------
>>   drivers/media/platform/ti-vpe/vpe.c                |  2 +-
>>   drivers/media/platform/vsp1/vsp1_brx.c             |  4 ++--
>>   drivers/media/platform/xilinx/xilinx-vip.c         |  2 +-
>>   46 files changed, 70 insertions(+), 70 deletions(-)
>>
>> diff --git a/drivers/media/platform/Kconfig 
>> b/drivers/media/platform/Kconfig
>> index 6cff26b29a38..4acbed189644 100644
>> --- a/drivers/media/platform/Kconfig
>> +++ b/drivers/media/platform/Kconfig
>> @@ -668,7 +668,7 @@ menuconfig SDR_PLATFORM_DRIVERS
>>   if SDR_PLATFORM_DRIVERS
>>   config VIDEO_RCAR_DRIF
>> -    tristate "Renesas Digitial Radio Interface (DRIF)"
>> +    tristate "Renesas Digital Radio Interface (DRIF)"
>>       depends on VIDEO_V4L2
>>       depends on ARCH_RENESAS || COMPILE_TEST
>>       select VIDEOBUF2_VMALLOC
>> diff --git a/drivers/media/platform/atmel/atmel-isi.c 
>> b/drivers/media/platform/atmel/atmel-isi.c
>> index fdb255e4a956..08b8d5583080 100644
>> --- a/drivers/media/platform/atmel/atmel-isi.c
>> +++ b/drivers/media/platform/atmel/atmel-isi.c
>> @@ -110,7 +110,7 @@ struct atmel_isi {
>>       bool                enable_preview_path;
>>       struct completion        complete;
>> -    /* ISI peripherial clock */
>> +    /* ISI peripheral clock */
>>       struct clk            *pclk;
>>       unsigned int            irq;
>> @@ -1078,7 +1078,7 @@ static void isi_graph_notify_unbind(struct 
>> v4l2_async_notifier *notifier,
>>       dev_dbg(isi->dev, "Removing %s\n", 
>> video_device_node_name(isi->vdev));
>> -    /* Checks internaly if vdev have been init or not */
>> +    /* Checks internally if vdev have been init or not */
>>       video_unregister_device(isi->vdev);
>>   }
>> diff --git a/drivers/media/platform/coda/coda-jpeg.c 
>> b/drivers/media/platform/coda/coda-jpeg.c
>> index 9f899a6cefed..39a2351c1e48 100644
>> --- a/drivers/media/platform/coda/coda-jpeg.c
>> +++ b/drivers/media/platform/coda/coda-jpeg.c
>> @@ -103,7 +103,7 @@ static const unsigned char chroma_ac_value[162 + 
>> 2] = {
>>   /*
>>    * Quantization tables for luminance and chrominance components in
>> - * zig-zag scan order from the Freescale i.MX VPU libaries
>> + * zig-zag scan order from the Freescale i.MX VPU libraries
>>    */
>>   static unsigned char luma_q[64] = {
>> diff --git a/drivers/media/platform/davinci/isif.c 
>> b/drivers/media/platform/davinci/isif.c
>> index 340f8218f54d..47cecd10eb9f 100644
>> --- a/drivers/media/platform/davinci/isif.c
>> +++ b/drivers/media/platform/davinci/isif.c
>> @@ -328,7 +328,7 @@ static void isif_config_bclamp(struct 
>> isif_black_clamp *bc)
>>       if (bc->en) {
>>           val = bc->bc_mode_color << ISIF_BC_MODE_COLOR_SHIFT;
>> -        /* Enable BC and horizontal clamp caculation paramaters */
>> +        /* Enable BC and horizontal clamp calculation parameters */
>>           val = val | 1 | (bc->horz.mode << ISIF_HORZ_BC_MODE_SHIFT);
>>           regw(val, CLAMPCFG);
>> @@ -358,7 +358,7 @@ static void isif_config_bclamp(struct 
>> isif_black_clamp *bc)
>>               regw(bc->horz.win_start_v_calc, CLHWIN2);
>>           }
>> -        /* vertical clamp caculation paramaters */
>> +        /* vertical clamp calculation parameters */
>>           /* Reset clamp value sel for previous line */
>>           val |=
>> diff --git a/drivers/media/platform/davinci/vpbe.c 
>> b/drivers/media/platform/davinci/vpbe.c
>> index 4766a7a23d16..8339163a5231 100644
>> --- a/drivers/media/platform/davinci/vpbe.c
>> +++ b/drivers/media/platform/davinci/vpbe.c
>> @@ -242,7 +242,7 @@ static int vpbe_set_output(struct vpbe_device 
>> *vpbe_dev, int index)
>>           goto unlock;
>>       /*
>> -     * It is assumed that venc or extenal encoder will set a default
>> +     * It is assumed that venc or external encoder will set a default
>>        * mode in the sub device. For external encoder or LCD pannel 
>> output,
>>        * we also need to set up the lcd port for the required mode. So 
>> setup
>>        * the lcd port for the default mode that is configured in the 
>> board
>> diff --git a/drivers/media/platform/davinci/vpif.c 
>> b/drivers/media/platform/davinci/vpif.c
>> index 16352e2263d2..df66461f5d4f 100644
>> --- a/drivers/media/platform/davinci/vpif.c
>> +++ b/drivers/media/platform/davinci/vpif.c
>> @@ -1,7 +1,7 @@
>>   /*
>>    * vpif - Video Port Interface driver
>>    * VPIF is a receiver and transmitter for video data. It has two 
>> channels(0, 1)
>> - * that receiveing video byte stream and two channels(2, 3) for video 
>> output.
>> + * that receiving video byte stream and two channels(2, 3) for video 
>> output.
>>    * The hardware supports SDTV, HDTV formats, raw data capture.
>>    * Currently, the driver supports NTSC and PAL standards.
>>    *
>> diff --git a/drivers/media/platform/davinci/vpif_display.c 
>> b/drivers/media/platform/davinci/vpif_display.c
>> index 3517487d9760..f4b4f2a1dfc0 100644
>> --- a/drivers/media/platform/davinci/vpif_display.c
>> +++ b/drivers/media/platform/davinci/vpif_display.c
>> @@ -138,7 +138,7 @@ static int vpif_buffer_queue_setup(struct 
>> vb2_queue *vq,
>>    * vpif_buffer_queue : Callback function to add buffer to DMA queue
>>    * @vb: ptr to vb2_buffer
>>    *
>> - * This callback fucntion queues the buffer to DMA engine
>> + * This callback function queues the buffer to DMA engine
>>    */
>>   static void vpif_buffer_queue(struct vb2_buffer *vb)
>>   {
>> @@ -635,7 +635,7 @@ static int vpif_try_fmt_vid_out(struct file *file, 
>> void *priv,
>>       struct v4l2_pix_format *pixfmt = &fmt->fmt.pix;
>>       /*
>> -     * to supress v4l-compliance warnings silently correct
>> +     * to suppress v4l-compliance warnings silently correct
>>        * the pixelformat
>>        */
>>       if (pixfmt->pixelformat != V4L2_PIX_FMT_YUV422P)
>> diff --git a/drivers/media/platform/exynos4-is/fimc-is-command.h 
>> b/drivers/media/platform/exynos4-is/fimc-is-command.h
>> index 0d1f52e394b1..b06b56b890d5 100644
>> --- a/drivers/media/platform/exynos4-is/fimc-is-command.h
>> +++ b/drivers/media/platform/exynos4-is/fimc-is-command.h
>> @@ -18,7 +18,7 @@
>>   #define FIMC_IS_COMMAND_VER    110 /* FIMC-IS command set version 
>> 1.10 */
>> -/* Enumeration of commands beetween the FIMC-IS and the host 
>> processor. */
>> +/* Enumeration of commands between the FIMC-IS and the host 
>> processor. */
>>   /* HOST to FIMC-IS */
>>   #define HIC_PREVIEW_STILL    0x0001
>> diff --git a/drivers/media/platform/exynos4-is/fimc-is-param.h 
>> b/drivers/media/platform/exynos4-is/fimc-is-param.h
>> index 8e31f7642776..22923a3d405e 100644
>> --- a/drivers/media/platform/exynos4-is/fimc-is-param.h
>> +++ b/drivers/media/platform/exynos4-is/fimc-is-param.h
>> @@ -298,7 +298,7 @@ enum isp_af_mode {
>>   #define ISP_FLASH_COMMAND_AUTO            2
>>   #define ISP_FLASH_COMMAND_TORCH            3 /* 3 sec */
>> -/* Flash red-eye commads */
>> +/* Flash red-eye commands */
>>   #define ISP_FLASH_REDEYE_DISABLE        0
>>   #define ISP_FLASH_REDEYE_ENABLE            1
>> diff --git a/drivers/media/platform/exynos4-is/media-dev.h 
>> b/drivers/media/platform/exynos4-is/media-dev.h
>> index 9f527670395a..a7c9490bbcb4 100644
>> --- a/drivers/media/platform/exynos4-is/media-dev.h
>> +++ b/drivers/media/platform/exynos4-is/media-dev.h
>> @@ -79,7 +79,7 @@ struct fimc_camclk_info {
>>   /**
>>    * struct fimc_sensor_info - image data source subdev information
>> - * @pdata: sensor's atrributes passed as media device's platform data
>> + * @pdata: sensor's attributes passed as media device's platform data
>>    * @asd: asynchronous subdev registration data structure
>>    * @subdev: image sensor v4l2 subdev
>>    * @host: fimc device the sensor is currently linked to
>> diff --git a/drivers/media/platform/exynos4-is/mipi-csis.c 
>> b/drivers/media/platform/exynos4-is/mipi-csis.c
>> index 35cb0162085b..234e047e3e8f 100644
>> --- a/drivers/media/platform/exynos4-is/mipi-csis.c
>> +++ b/drivers/media/platform/exynos4-is/mipi-csis.c
>> @@ -183,7 +183,7 @@ struct csis_drvdata {
>>    * @index: the hardware instance index
>>    * @pdev: CSIS platform device
>>    * @phy: pointer to the CSIS generic PHY
>> - * @regs: mmaped I/O registers memory
>> + * @regs: mmapped I/O registers memory
>>    * @supplies: CSIS regulator supplies
>>    * @clock: CSIS clocks
>>    * @irq: requested s5p-mipi-csis irq number
>> @@ -745,7 +745,7 @@ static int s5pcsis_parse_dt(struct platform_device 
>> *pdev,
>>           goto err;
>>       }
>> -    /* Get MIPI CSI-2 bus configration from the endpoint node. */
>> +    /* Get MIPI CSI-2 bus configuration from the endpoint node. */
>>       of_property_read_u32(node, "samsung,csis-hs-settle",
>>                       &state->hs_settle);
>>       state->wclk_ext = of_property_read_bool(node,
>> diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c 
>> b/drivers/media/platform/marvell-ccic/mmp-driver.c
>> index 70a2833db0d1..af76eb637773 100644
>> --- a/drivers/media/platform/marvell-ccic/mmp-driver.c
>> +++ b/drivers/media/platform/marvell-ccic/mmp-driver.c
>> @@ -240,8 +240,8 @@ static void mmpcam_calc_dphy(struct mcam_camera 
>> *mcam)
>>        *  bit 8 ~ bit 15: HS_SETTLE
>>        *   Time interval during which the HS
>>        *   receiver shall ignore any Data Lane
>> -     *   HS transistions.
>> -     *   The vaule has been calibrated on
>> +     *   HS transitions.
>> +     *   The value has been calibrated on
>>        *   different boards. It seems to work well.
>>        *
>>        *  More detail please refer
>> diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_core.h 
>> b/drivers/media/platform/mtk-mdp/mtk_mdp_core.h
>> index ad1cff306efd..e5abb1abb3a3 100644
>> --- a/drivers/media/platform/mtk-mdp/mtk_mdp_core.h
>> +++ b/drivers/media/platform/mtk-mdp/mtk_mdp_core.h
>> @@ -41,7 +41,7 @@
>>   #define MTK_MDP_CTX_ERROR        BIT(5)
>>   /**
>> - *  struct mtk_mdp_pix_align - alignement of image
>> + *  struct mtk_mdp_pix_align - alignment of image
>>    *  @org_w: source alignment of width
>>    *  @org_h: source alignment of height
>>    *  @target_w: dst alignment of width
>> @@ -122,8 +122,8 @@ struct mtk_mdp_frame {
>>   /**
>>    * struct mtk_mdp_variant - image processor variant information
>>    * @pix_max:        maximum limit of image size
>> - * @pix_min:        minimun limit of image size
>> - * @pix_align:        alignement of image
>> + * @pix_min:        minimum limit of image size
>> + * @pix_align:        alignment of image
>>    * @h_scale_up_max:    maximum scale-up in horizontal
>>    * @v_scale_up_max:    maximum scale-up in vertical
>>    * @h_scale_down_max:    maximum scale-down in horizontal
>> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c 
>> b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
>> index ba619647bc10..794aba685120 100644
>> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
>> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
>> @@ -1170,7 +1170,7 @@ static void vb2ops_vdec_buf_queue(struct 
>> vb2_buffer *vb)
>>       ret = vdec_if_decode(ctx, &src_mem, NULL, &res_chg);
>>       if (ret || !res_chg) {
>>           /*
>> -         * fb == NULL menas to parse SPS/PPS header or
>> +         * fb == NULL means to parse SPS/PPS header or
>>            * resolution info in src_mem. Decode can fail
>>            * if there is no SPS header or picture info
>>            * in bs
>> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h 
>> b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
>> index 8aba69555b12..e7e2a108def9 100644
>> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
>> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
>> @@ -151,9 +151,9 @@ struct mtk_q_data {
>>    * @intra_period: I frame period
>>    * @gop_size: group of picture size, it's used as the intra frame 
>> period
>>    * @framerate_num: frame rate numerator. ex: framerate_num=30 and
>> - *           framerate_denom=1 menas FPS is 30
>> + *           framerate_denom=1 means FPS is 30
>>    * @framerate_denom: frame rate denominator. ex: framerate_num=30 and
>> - *             framerate_denom=1 menas FPS is 30
>> + *             framerate_denom=1 means FPS is 30
>>    * @h264_max_qp: Max value for H.264 quantization parameter
>>    * @h264_profile: V4L2 defined H.264 profile
>>    * @h264_level: V4L2 defined H.264 level
>> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c 
>> b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
>> index d1f12257bf66..2af654240d96 100644
>> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
>> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
>> @@ -393,7 +393,7 @@ static void mtk_venc_set_param(struct 
>> mtk_vcodec_ctx *ctx,
>>           param->input_yuv_fmt = VENC_YUV_FORMAT_NV21;
>>           break;
>>       default:
>> -        mtk_v4l2_err("Unsupport fourcc =%d", q_data_src->fmt->fourcc);
>> +        mtk_v4l2_err("Unsupported fourcc =%d", q_data_src->fmt->fourcc);
>>           break;
>>       }
>>       param->h264_profile = enc_params->h264_profile;
>> diff --git a/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c 
>> b/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c
>> index aa3ce41898bc..02c960c63ac0 100644
>> --- a/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c
>> +++ b/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c
>> @@ -55,7 +55,7 @@ struct h264_fb {
>>   /**
>>    * struct h264_ring_fb_list - ring frame buffer list
>> - * @fb_list   : frame buffer arrary
>> + * @fb_list   : frame buffer array
>>    * @read_idx  : read index
>>    * @write_idx : write index
>>    * @count     : buffer count in list
>> @@ -72,7 +72,7 @@ struct h264_ring_fb_list {
>>   /**
>>    * struct vdec_h264_dec_info - decode information
>>    * @dpb_sz        : decoding picture buffer size
>> - * @resolution_changed  : resoltion change happen
>> + * @resolution_changed  : resolution change happen
>>    * @realloc_mv_buf    : flag to notify driver to re-allocate mv buffer
>>    * @reserved        : for 8 bytes alignment
>>    * @bs_dma        : Input bit-stream buffer dma address
>> diff --git a/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c 
>> b/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c
>> index 3e84a761db3a..bac3723038de 100644
>> --- a/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c
>> +++ b/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c
>> @@ -120,7 +120,7 @@ struct vdec_vp8_hw_reg_base {
>>   /**
>>    * struct vdec_vp8_vpu_inst - VPU instance for VP8 decode
>>    * @wq_hd    : Wait queue to wait VPU message ack
>> - * @signaled    : 1 - Host has received ack message from VPU, 0 - not 
>> recevie
>> + * @signaled    : 1 - Host has received ack message from VPU, 0 - not 
>> receive
>>    * @failure    : VPU execution result status 0 - success, others - fail
>>    * @inst_addr    : VPU decoder instance address
>>    */
>> diff --git a/drivers/media/platform/mtk-vcodec/vdec_drv_if.h 
>> b/drivers/media/platform/mtk-vcodec/vdec_drv_if.h
>> index ded1154481cd..9a21591f3818 100644
>> --- a/drivers/media/platform/mtk-vcodec/vdec_drv_if.h
>> +++ b/drivers/media/platform/mtk-vcodec/vdec_drv_if.h
>> @@ -80,7 +80,7 @@ void vdec_if_deinit(struct mtk_vcodec_ctx *ctx);
>>    * vdec_if_decode() - trigger decode
>>    * @ctx    : [in] v4l2 context
>>    * @bs    : [in] input bitstream
>> - * @fb    : [in] frame buffer to store decoded frame, when null menas 
>> parse
>> + * @fb    : [in] frame buffer to store decoded frame, when null means 
>> parse
>>    *    header only
>>    * @res_chg    : [out] resolution change happens if current bs have 
>> different
>>    *    picture width/height
>> diff --git a/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h 
>> b/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h
>> index cd37bb2a610f..79d8eac7f5e2 100644
>> --- a/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h
>> +++ b/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h
>> @@ -62,7 +62,7 @@ int vpu_dec_start(struct vdec_vpu_inst *vpu, 
>> uint32_t *data, unsigned int len);
>>   /**
>>    * vpu_dec_end - end decoding, basically the function will be 
>> invoked once
>>    *               when HW decoding done interrupt received 
>> successfully. The
>> - *               decoder in VPU will continute to do referene frame 
>> management
>> + *               decoder in VPU will continue to do reference frame 
>> management
>>    *               and check if there is a new decoded frame available 
>> to display.
>>    *
>>    * @vpu : instance for vdec_vpu_inst
>> diff --git a/drivers/media/platform/omap/omap_vout.c 
>> b/drivers/media/platform/omap/omap_vout.c
>> index ff3de2dce5a2..37f0d7146dfa 100644
>> --- a/drivers/media/platform/omap/omap_vout.c
>> +++ b/drivers/media/platform/omap/omap_vout.c
>> @@ -1129,7 +1129,7 @@ static int vidioc_s_fmt_vid_out(struct file 
>> *file, void *fh,
>>       }
>>       timing = &dssdev->panel.timings;
>> -    /* We dont support RGB24-packed mode if vrfb rotation
>> +    /* We don't support RGB24-packed mode if vrfb rotation
>>        * is enabled*/
>>       if ((is_rotation_enabled(vout)) &&
>>               f->fmt.pix.pixelformat == V4L2_PIX_FMT_RGB24) {
>> @@ -1147,7 +1147,7 @@ static int vidioc_s_fmt_vid_out(struct file 
>> *file, void *fh,
>>           vout->fbuf.fmt.width = timing->x_res;
>>       }
>> -    /* change to samller size is OK */
>> +    /* change to smaller size is OK */
>>       bpp = omap_vout_try_format(&f->fmt.pix);
>>       f->fmt.pix.sizeimage = f->fmt.pix.width * f->fmt.pix.height * bpp;
>> diff --git a/drivers/media/platform/omap/omap_voutdef.h 
>> b/drivers/media/platform/omap/omap_voutdef.h
>> index 56b630b1c8b4..c740393c8509 100644
>> --- a/drivers/media/platform/omap/omap_voutdef.h
>> +++ b/drivers/media/platform/omap/omap_voutdef.h
>> @@ -37,7 +37,7 @@
>>   #define VID_MAX_WIDTH        1280    /* Largest width */
>>   #define VID_MAX_HEIGHT        720    /* Largest height */
>> -/* Mimimum requirement is 2x2 for DSS */
>> +/* Minimum requirement is 2x2 for DSS */
>>   #define VID_MIN_WIDTH        2
>>   #define VID_MIN_HEIGHT        2
>> @@ -135,7 +135,7 @@ struct omap_vout_device {
>>       enum omap_color_mode dss_mode;
>>       /* we don't allow to request new buffer when old buffers are
>> -     * still mmaped
>> +     * still mmapped
>>        */
>>       int mmap_count;
>> diff --git a/drivers/media/platform/omap3isp/isp.c 
>> b/drivers/media/platform/omap3isp/isp.c
>> index 13f2828d880d..bd57174d81a7 100644
>> --- a/drivers/media/platform/omap3isp/isp.c
>> +++ b/drivers/media/platform/omap3isp/isp.c
>> @@ -1517,7 +1517,7 @@ void omap3isp_print_status(struct isp_device *isp)
>>    *
>>    * To solve this problem power management support is split into 
>> prepare/complete
>>    * and suspend/resume operations. The pipelines are stopped in 
>> prepare() and the
>> - * ISP clocks get disabled in suspend(). Similarly, the clocks are 
>> reenabled in
>> + * ISP clocks get disabled in suspend(). Similarly, the clocks are 
>> re-enabled in
>>    * resume(), and the the pipelines are restarted in complete().
>>    *
>>    * TODO: PM dependencies between the ISP and sensors are not 
>> modelled explicitly
>> diff --git a/drivers/media/platform/omap3isp/ispccdc.c 
>> b/drivers/media/platform/omap3isp/ispccdc.c
>> index 14a1c24037c4..261ad1175f98 100644
>> --- a/drivers/media/platform/omap3isp/ispccdc.c
>> +++ b/drivers/media/platform/omap3isp/ispccdc.c
>> @@ -1594,7 +1594,7 @@ static int ccdc_isr_buffer(struct 
>> isp_ccdc_device *ccdc)
>>           return 0;
>>       /* We're in continuous mode, and memory writes were disabled due 
>> to a
>> -     * buffer underrun. Reenable them now that we have a buffer. The 
>> buffer
>> +     * buffer underrun. Re-enable them now that we have a buffer. The 
>> buffer
>>        * address has been set in ccdc_video_queue.
>>        */
>>       if (ccdc->state == ISP_PIPELINE_STREAM_CONTINUOUS && 
>> ccdc->underrun) {
>> @@ -1712,7 +1712,7 @@ static void ccdc_vd1_isr(struct isp_ccdc_device 
>> *ccdc)
>>        * data to memory the CCDC and LSC are stopped immediately but
>>        * without change the CCDC stopping state machine. The CCDC
>>        * stopping state machine should be used only when user request
>> -     * for stopping is received (SINGLESHOT is an exeption).
>> +     * for stopping is received (SINGLESHOT is an exception).
>>        */
>>       switch (ccdc->state) {
>>       case ISP_PIPELINE_STREAM_SINGLESHOT:
>> diff --git a/drivers/media/platform/omap3isp/ispcsi2.c 
>> b/drivers/media/platform/omap3isp/ispcsi2.c
>> index 9c180f607bcb..da66ea65be5d 100644
>> --- a/drivers/media/platform/omap3isp/ispcsi2.c
>> +++ b/drivers/media/platform/omap3isp/ispcsi2.c
>> @@ -710,7 +710,7 @@ static void csi2_isr_ctx(struct isp_csi2_device 
>> *csi2,
>>       /* Skip interrupts until we reach the frame skip count. The CSI2 
>> will be
>>        * automatically disabled, as the frame skip count has been 
>> programmed
>> -     * in the CSI2_CTx_CTRL1::COUNT field, so reenable it.
>> +     * in the CSI2_CTx_CTRL1::COUNT field, so re-enable it.
>>        *
>>        * It would have been nice to rely on the FRAME_NUMBER interrupt 
>> instead
>>        * but it turned out that the interrupt is only generated when 
>> the CSI2
>> diff --git a/drivers/media/platform/pxa_camera.c 
>> b/drivers/media/platform/pxa_camera.c
>> index 3cf3c6390cc8..4fe228752a43 100644
>> --- a/drivers/media/platform/pxa_camera.c
>> +++ b/drivers/media/platform/pxa_camera.c
>> @@ -1631,7 +1631,7 @@ static int pxa_camera_set_bus_param(struct 
>> pxa_camera_dev *pcdev)
>>       pcdev->channels = 1;
>> -    /* Make choises, based on platform preferences */
>> +    /* Make choices, based on platform preferences */
>>       if ((common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) &&
>>           (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) {
>>           if (pcdev->platform_flags & PXA_CAMERA_HSP)
>> diff --git a/drivers/media/platform/qcom/venus/core.h 
>> b/drivers/media/platform/qcom/venus/core.h
>> index 79c7e816c706..7a3feb5cee00 100644
>> --- a/drivers/media/platform/qcom/venus/core.h
>> +++ b/drivers/media/platform/qcom/venus/core.h
>> @@ -219,7 +219,7 @@ struct venus_buffer {
>>   #define to_venus_buffer(ptr)    container_of(ptr, struct 
>> venus_buffer, vb)
>>   /**
>> - * struct venus_inst - holds per instance paramerters
>> + * struct venus_inst - holds per instance parameters
>>    *
>>    * @list:    used for attach an instance to the core
>>    * @lock:    instance lock
>> diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c 
>> b/drivers/media/platform/rcar-vin/rcar-dma.c
>> index beb9248992a4..2207a31d355e 100644
>> --- a/drivers/media/platform/rcar-vin/rcar-dma.c
>> +++ b/drivers/media/platform/rcar-vin/rcar-dma.c
>> @@ -681,7 +681,7 @@ static int rvin_setup(struct rvin_dev *vin)
>>           break;
>>       }
>> -    /* Enable VSYNC Field Toogle mode after one VSYNC input */
>> +    /* Enable VSYNC Field Toggle mode after one VSYNC input */
>>       if (vin->info->model == RCAR_GEN3)
>>           dmr2 = VNDMR2_FTEV;
>>       else
>> diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c 
>> b/drivers/media/platform/rcar-vin/rcar-v4l2.c
>> index 7a2851790b91..7cbdcbf9b090 100644
>> --- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
>> +++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
>> @@ -665,7 +665,7 @@ static void rvin_mc_try_format(struct rvin_dev *vin,
>>        * The V4L2 specification clearly documents the colorspace fields
>>        * as being set by drivers for capture devices. Using the values
>>        * supplied by userspace thus wouldn't comply with the API. Until
>> -     * the API is updated force fixed vaules.
>> +     * the API is updated force fixed values.
>>        */
>>       pix->colorspace = RVIN_DEFAULT_COLORSPACE;
>>       pix->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(pix->colorspace);
>> @@ -964,7 +964,7 @@ void rvin_v4l2_unregister(struct rvin_dev *vin)
>>       v4l2_info(&vin->v4l2_dev, "Removing %s\n",
>>             video_device_node_name(&vin->vdev));
>> -    /* Checks internaly if vdev have been init or not */
>> +    /* Checks internally if vdev have been init or not */
>>       video_unregister_device(&vin->vdev);
>>   }
>> diff --git a/drivers/media/platform/rockchip/rga/rga-hw.c 
>> b/drivers/media/platform/rockchip/rga/rga-hw.c
>> index 96d1b1b3fe8e..843e50d17a72 100644
>> --- a/drivers/media/platform/rockchip/rga/rga-hw.c
>> +++ b/drivers/media/platform/rockchip/rga/rga-hw.c
>> @@ -256,7 +256,7 @@ static void rga_cmd_set_trans_info(struct rga_ctx 
>> *ctx)
>>       }
>>       /*
>> -     * Cacluate the up/down scaling mode/factor.
>> +     * Calculate the up/down scaling mode/factor.
>>        *
>>        * RGA used to scale the picture first, and then rotate second,
>>        * so we need to swap the w/h when rotate degree is 90/270.
>> @@ -304,7 +304,7 @@ static void rga_cmd_set_trans_info(struct rga_ctx 
>> *ctx)
>>       }
>>       /*
>> -     * Cacluate the framebuffer virtual strides and active size,
>> +     * Calculate the framebuffer virtual strides and active size,
>>        * note that the step of vir_stride / vir_width is 4 byte words
>>        */
>>       src_vir_info.data.vir_stride = ctx->in.stride >> 2;
>> @@ -318,7 +318,7 @@ static void rga_cmd_set_trans_info(struct rga_ctx 
>> *ctx)
>>       dst_act_info.data.act_width = dst_w - 1;
>>       /*
>> -     * Cacluate the source framebuffer base address with offset pixel.
>> +     * Calculate the source framebuffer base address with offset pixel.
>>        */
>>       src_offsets = rga_get_addr_offset(&ctx->in, src_x, src_y,
>>                         src_w, src_h);
>> diff --git a/drivers/media/platform/s3c-camif/camif-core.h 
>> b/drivers/media/platform/s3c-camif/camif-core.h
>> index 1f5c8c94ce89..be5e7357dffc 100644
>> --- a/drivers/media/platform/s3c-camif/camif-core.h
>> +++ b/drivers/media/platform/s3c-camif/camif-core.h
>> @@ -260,7 +260,7 @@ struct camif_vp {
>>    * @clock:      clocks required for the CAMIF operation
>>    * @lock:      mutex protecting this data structure
>>    * @slock:      spinlock protecting CAMIF registers
>> - * @io_base:      start address of the mmaped CAMIF registers
>> + * @io_base:      start address of the mmapped CAMIF registers
>>    */
>>   struct camif_dev {
>>       struct media_device        media_dev;
>> diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.h 
>> b/drivers/media/platform/s5p-jpeg/jpeg-core.h
>> index 90fda4b720eb..144c102ff05f 100644
>> --- a/drivers/media/platform/s5p-jpeg/jpeg-core.h
>> +++ b/drivers/media/platform/s5p-jpeg/jpeg-core.h
>> @@ -153,7 +153,7 @@ struct s5p_jpeg_variant {
>>   /**
>>    * struct jpeg_fmt - driver's internal color format data
>> - * @name:    format descritpion
>> + * @name:    format description
>>    * @fourcc:    the fourcc code, 0 if not applicable
>>    * @depth:    number of bits per pixel
>>    * @colplanes:    number of color planes (1 for packed formats)
>> @@ -193,7 +193,7 @@ struct s5p_jpeg_marker {
>>    * @sos:    SOS marker's position relative to the buffer beginning
>>    * @dht:    DHT markers' positions relative to the buffer beginning
>>    * @dqt:    DQT markers' positions relative to the buffer beginning
>> - * @sof:    SOF0 marker's postition relative to the buffer beginning
>> + * @sof:    SOF0 marker's position relative to the buffer beginning
>>    * @sof_len:    SOF0 marker's payload length (without length field 
>> itself)
>>    * @components:    number of image components
>>    * @size:    image buffer size in bytes
>> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h 
>> b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
>> index 20442a9b9f7a..24148020baa9 100644
>> --- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
>> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
>> @@ -268,7 +268,7 @@ struct s5p_mfc_priv_buf {
>>    * @enc_ctrl_handler:    control framework handler for encoding
>>    * @pm:            power management control
>>    * @variant:        MFC hardware variant information
>> - * @num_inst:        couter of active MFC instances
>> + * @num_inst:        counter of active MFC instances
>>    * @irqlock:        lock for operations on videobuf2 queues
>>    * @condlock:        lock for changing/checking if a context is 
>> ready to be
>>    *            processed
>> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c 
>> b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
>> index ee7b15b335e0..9f832ba7bc8c 100644
>> --- a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
>> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
>> @@ -51,7 +51,7 @@ int s5p_mfc_load_firmware(struct s5p_mfc_dev *dev)
>>       struct firmware *fw_blob;
>>       int i, err = -EINVAL;
>> -    /* Firmare has to be present as a separate file or compiled
>> +    /* Firmware has to be present as a separate file or compiled
>>        * into kernel. */
>>       mfc_debug_enter();
>> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c 
>> b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
>> index f4c0e3a8f27d..e111f9c47179 100644
>> --- a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
>> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
>> @@ -602,7 +602,7 @@ static int vidioc_querybuf(struct file *file, void 
>> *priv,
>>       int i;
>>       if (buf->memory != V4L2_MEMORY_MMAP) {
>> -        mfc_err("Only mmaped buffers can be used\n");
>> +        mfc_err("Only mmapped buffers can be used\n");
>>           return -EINVAL;
>>       }
>>       mfc_debug(2, "State: %d, buf->type: %d\n", ctx->state, buf->type);
>> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c 
>> b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c
>> index 0913881219ff..6144e95f6425 100644
>> --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c
>> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c
>> @@ -1293,7 +1293,7 @@ static int s5p_mfc_run_init_dec_buffers(struct 
>> s5p_mfc_ctx *ctx)
>>        * First set the output frame buffers
>>        */
>>       if (ctx->capture_state != QUEUE_BUFS_MMAPED) {
>> -        mfc_err("It seems that not all destination buffers were 
>> mmaped\nMFC requires that all destination are mmaped before starting 
>> processing\n");
>> +        mfc_err("It seems that not all destination buffers were 
>> mmapped\nMFC requires that all destination are mmapped before starting 
>> processing\n");
>>           return -EAGAIN;
>>       }
>>       if (list_empty(&ctx->src_queue)) {
>> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c 
>> b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
>> index 7c629be43205..281699ab7fe1 100644
>> --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
>> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
>> @@ -53,7 +53,7 @@ static int s5p_mfc_alloc_dec_temp_buffers_v6(struct 
>> s5p_mfc_ctx *ctx)
>>       return 0;
>>   }
>> -/* Release temproary buffers for decoding */
>> +/* Release temporary buffers for decoding */
>>   static void s5p_mfc_release_dec_desc_buffer_v6(struct s5p_mfc_ctx *ctx)
>>   {
>>       /* NOP */
>> @@ -1928,7 +1928,7 @@ static inline int 
>> s5p_mfc_run_init_dec_buffers(struct s5p_mfc_ctx *ctx)
>>       if (ctx->capture_state != QUEUE_BUFS_MMAPED) {
>>           mfc_err("It seems that not all destination buffers were\n"
>> -            "mmaped.MFC requires that all destination are mmaped\n"
>> +            "mmapped.MFC requires that all destination are mmapped\n"
>>               "before starting processing.\n");
>>           return -EAGAIN;
>>       }
>> diff --git a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h 
>> b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h
>> index 3dbb3a287cc0..c9d6021904cd 100644
>> --- a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h
>> +++ b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h
>> @@ -193,7 +193,7 @@ struct c8sectpfei {
>>   #define C8SECTPFE_SYS_ENABLE             BIT(0)
>>   /*
>> - * Ponter record data structure required for each input block
>> + * Pointer record data structure required for each input block
>>    * see Table 82 on page 167 of functional specification.
>>    */
>> diff --git a/drivers/media/platform/sti/delta/delta.h 
>> b/drivers/media/platform/sti/delta/delta.h
>> index 2ba99922c05b..914556030e70 100644
>> --- a/drivers/media/platform/sti/delta/delta.h
>> +++ b/drivers/media/platform/sti/delta/delta.h
>> @@ -286,7 +286,7 @@ struct delta_dec {
>>        * Header parsing must be done using decode(), giving
>>        * explicitly header access unit or first access unit of bitstream.
>>        * If no valid header is found, get_streaminfo will return 
>> -ENODATA,
>> -     * in this case the next bistream access unit must be decoded till
>> +     * in this case the next bitstream access unit must be decoded till
>>        * get_streaminfo becomes successful.
>>        */
>>       int (*get_streaminfo)(struct delta_ctx *ctx,
>> diff --git a/drivers/media/platform/sti/hva/hva-h264.c 
>> b/drivers/media/platform/sti/hva/hva-h264.c
>> index b61a5d337d2a..c34f7cf5aed2 100644
>> --- a/drivers/media/platform/sti/hva/hva-h264.c
>> +++ b/drivers/media/platform/sti/hva/hva-h264.c
>> @@ -626,7 +626,7 @@ static int hva_h264_prepare_task(struct hva_ctx 
>> *pctx,
>>       td->frame_width = frame_width;
>>       td->frame_height = frame_height;
>> -    /* set frame alignement */
>> +    /* set frame alignment */
>>       td->window_width =  frame_width;
>>       td->window_height = frame_height;
>>       td->window_horizontal_offset = 0;
>> diff --git a/drivers/media/platform/stm32/stm32-dcmi.c 
>> b/drivers/media/platform/stm32/stm32-dcmi.c
>> index 6732874114cf..5fe5b38fa901 100644
>> --- a/drivers/media/platform/stm32/stm32-dcmi.c
>> +++ b/drivers/media/platform/stm32/stm32-dcmi.c
>> @@ -1544,7 +1544,7 @@ static void dcmi_graph_notify_unbind(struct 
>> v4l2_async_notifier *notifier,
>>       dev_dbg(dcmi->dev, "Removing %s\n", 
>> video_device_node_name(dcmi->vdev));
>> -    /* Checks internaly if vdev has been init or not */
>> +    /* Checks internally if vdev has been init or not */
>>       video_unregister_device(dcmi->vdev);
>>   }
>> diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h 
>> b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h
>> index 0bb000712c33..85f97d4f086e 100644
>> --- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h
>> +++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h
>> @@ -65,7 +65,7 @@ bool sun6i_csi_is_format_supported(struct sun6i_csi 
>> *csi, u32 pixformat,
>>   int sun6i_csi_set_power(struct sun6i_csi *csi, bool enable);
>>   /**
>> - * sun6i_csi_update_config() - update the csi register setttings
>> + * sun6i_csi_update_config() - update the csi register settings
>>    * @csi:    pointer to the csi
>>    * @config:    see struct sun6i_csi_config
>>    */
>> diff --git a/drivers/media/platform/ti-vpe/vpdma.c 
>> b/drivers/media/platform/ti-vpe/vpdma.c
>> index e2cf2b90e500..1da2cb3aaf0c 100644
>> --- a/drivers/media/platform/ti-vpe/vpdma.c
>> +++ b/drivers/media/platform/ti-vpe/vpdma.c
>> @@ -404,7 +404,7 @@ EXPORT_SYMBOL(vpdma_map_desc_buf);
>>   /*
>>    * unmap descriptor/payload DMA buffer, disabling DMA access and
>> - * allowing the main processor to acces the data
>> + * allowing the main processor to access the data
>>    */
>>   void vpdma_unmap_desc_buf(struct vpdma_data *vpdma, struct vpdma_buf 
>> *buf)
>>   {
>> @@ -501,7 +501,7 @@ void vpdma_reset_desc_list(struct vpdma_desc_list 
>> *list)
>>   EXPORT_SYMBOL(vpdma_reset_desc_list);
>>   /*
>> - * free the buffer allocated fot the VPDMA descriptor list, this 
>> should be
>> + * free the buffer allocated for the VPDMA descriptor list, this 
>> should be
>>    * called when the user doesn't want to use VPDMA any more.
>>    */
>>   void vpdma_free_desc_list(struct vpdma_desc_list *list)
>> @@ -790,7 +790,7 @@ static void dump_dtd(struct vpdma_dtd *dtd)
>>    * append an outbound data transfer descriptor to the given 
>> descriptor list,
>>    * this sets up a 'client to memory' VPDMA transfer for the given 
>> VPDMA channel
>>    *
>> - * @list: vpdma desc list to which we add this decriptor
>> + * @list: vpdma desc list to which we add this descriptor
>>    * @width: width of the image in pixels in memory
>>    * @c_rect: compose params of output image
>>    * @fmt: vpdma data format of the buffer
>> @@ -798,7 +798,7 @@ static void dump_dtd(struct vpdma_dtd *dtd)
>>    * max_width: enum for maximum width of data transfer
>>    * max_height: enum for maximum height of data transfer
>>    * chan: VPDMA channel
>> - * flags: VPDMA flags to configure some descriptor fileds
>> + * flags: VPDMA flags to configure some descriptor fields
>>    */
>>   void vpdma_add_out_dtd(struct vpdma_desc_list *list, int width,
>>           int stride, const struct v4l2_rect *c_rect,
>> @@ -863,14 +863,14 @@ EXPORT_SYMBOL(vpdma_rawchan_add_out_dtd);
>>    * append an inbound data transfer descriptor to the given 
>> descriptor list,
>>    * this sets up a 'memory to client' VPDMA transfer for the given 
>> VPDMA channel
>>    *
>> - * @list: vpdma desc list to which we add this decriptor
>> + * @list: vpdma desc list to which we add this descriptor
>>    * @width: width of the image in pixels in memory(not the cropped 
>> width)
>>    * @c_rect: crop params of input image
>>    * @fmt: vpdma data format of the buffer
>>    * dma_addr: dma address as seen by VPDMA
>>    * chan: VPDMA channel
>>    * field: top or bottom field info of the input image
>> - * flags: VPDMA flags to configure some descriptor fileds
>> + * flags: VPDMA flags to configure some descriptor fields
>>    * frame_width/height: the complete width/height of the image 
>> presented to the
>>    *            client (this makes sense when multiple channels are
>>    *            connected to the same client, forming a larger frame)
>> @@ -1008,7 +1008,7 @@ unsigned int vpdma_get_list_mask(struct 
>> vpdma_data *vpdma, int irq_num)
>>   }
>>   EXPORT_SYMBOL(vpdma_get_list_mask);
>> -/* clear previosuly occured list intterupts in the LIST_STAT register */
>> +/* clear previously occurred list interupts in the LIST_STAT register */
>>   void vpdma_clear_list_stat(struct vpdma_data *vpdma, int irq_num,
>>                  int list_num)
>>   {
>> diff --git a/drivers/media/platform/ti-vpe/vpe.c 
>> b/drivers/media/platform/ti-vpe/vpe.c
>> index d70871d0ad2d..207e7e76c048 100644
>> --- a/drivers/media/platform/ti-vpe/vpe.c
>> +++ b/drivers/media/platform/ti-vpe/vpe.c
>> @@ -876,7 +876,7 @@ static int set_srcdst_params(struct vpe_ctx *ctx)
>>           /*
>>            * we make sure that the source image has a 16 byte aligned
>>            * stride, we need to do the same for the motion vector buffer
>> -         * by aligning it's stride to the next 16 byte boundry. this
>> +         * by aligning it's stride to the next 16 byte boundary. this
>>            * extra space will not be used by the de-interlacer, but will
>>            * ensure that vpdma operates correctly
>>            */
>> diff --git a/drivers/media/platform/vsp1/vsp1_brx.c 
>> b/drivers/media/platform/vsp1/vsp1_brx.c
>> index 5e50178b057d..58ad248cd7f7 100644
>> --- a/drivers/media/platform/vsp1/vsp1_brx.c
>> +++ b/drivers/media/platform/vsp1/vsp1_brx.c
>> @@ -296,7 +296,7 @@ static void brx_configure_stream(struct 
>> vsp1_entity *entity,
>>       /*
>>        * The hardware is extremely flexible but we have no userspace 
>> API to
>>        * expose all the parameters, nor is it clear whether we would 
>> have use
>> -     * cases for all the supported modes. Let's just harcode the 
>> parameters
>> +     * cases for all the supported modes. Let's just hardcode the 
>> parameters
>>        * to sane default values for now.
>>        */
>> @@ -373,7 +373,7 @@ static void brx_configure_stream(struct 
>> vsp1_entity *entity,
>>           vsp1_brx_write(brx, dlb, VI6_BRU_CTRL(i), ctrl);
>>           /*
>> -         * Harcode the blending formula to
>> +         * Hardcode the blending formula to
>>            *
>>            *    DSTc = DSTc * (1 - SRCa) + SRCc * SRCa
>>            *    DSTa = DSTa * (1 - SRCa) + SRCa
>> diff --git a/drivers/media/platform/xilinx/xilinx-vip.c 
>> b/drivers/media/platform/xilinx/xilinx-vip.c
>> index 18f98838111b..08a825c3a3f6 100644
>> --- a/drivers/media/platform/xilinx/xilinx-vip.c
>> +++ b/drivers/media/platform/xilinx/xilinx-vip.c
>> @@ -166,7 +166,7 @@ EXPORT_SYMBOL_GPL(xvip_set_format_size);
>>    * the register, otherwise the bitmask is cleared from the register
>>    * when the flag @set is false.
>>    *
>> - * Fox eample, this function can be used to set a control with a 
>> boolean value
>> + * Fox example, this function can be used to set a control with a 
>> boolean value
>>    * requested by users. If the caller knows whether to set or clear 
>> in the first
>>    * place, the caller should call xvip_clr() or xvip_set() directly 
>> instead of
>>    * using this function.
>>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel