* [PATCH v3] ARM: sun8i: h3: bluetooth for Banana Pi M2 Zero board
@ 2019-04-12 4:58 Andreas Kemnade
2019-04-15 8:05 ` Maxime Ripard
0 siblings, 1 reply; 2+ messages in thread
From: Andreas Kemnade @ 2019-04-12 4:58 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, devicetree, linux-arm-kernel,
linux-kernel, Chen-Yu Tsai, maxime.ripard
Cc: Andreas Kemnade
The Banana Pi M2 Zero board has an AP6212 BT+Wifi combo chip
with Broadcom internals attached to UART1 and some gpios.
This addition is in line with similar boards.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
---
changes in v3: spelling fixes
changes in v2: remove pinctrl things
arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
index 1db2541135a7..57432d0500b1 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
@@ -69,6 +69,8 @@
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+ clocks = <&rtc 1>;
+ clock-names = "ext_clock";
};
};
@@ -122,7 +124,20 @@
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ vbat-supply = <®_vcc3v3>;
+ vddio-supply = <®_vcc3v3>;
+ device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+ host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+ shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+ };
+
};
&usb_otg {
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 2+ messages in thread* Re: [PATCH v3] ARM: sun8i: h3: bluetooth for Banana Pi M2 Zero board
2019-04-12 4:58 [PATCH v3] ARM: sun8i: h3: bluetooth for Banana Pi M2 Zero board Andreas Kemnade
@ 2019-04-15 8:05 ` Maxime Ripard
0 siblings, 0 replies; 2+ messages in thread
From: Maxime Ripard @ 2019-04-15 8:05 UTC (permalink / raw)
To: Andreas Kemnade
Cc: Mark Rutland, devicetree, linux-kernel, Chen-Yu Tsai, Rob Herring,
linux-arm-kernel
[-- Attachment #1.1: Type: text/plain, Size: 404 bytes --]
On Fri, Apr 12, 2019 at 06:58:32AM +0200, Andreas Kemnade wrote:
> The Banana Pi M2 Zero board has an AP6212 BT+Wifi combo chip
> with Broadcom internals attached to UART1 and some gpios.
> This addition is in line with similar boards.
>
> Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Applied, thanks!
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-04-15 8:05 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-04-12 4:58 [PATCH v3] ARM: sun8i: h3: bluetooth for Banana Pi M2 Zero board Andreas Kemnade
2019-04-15 8:05 ` Maxime Ripard
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox