From: Marek Vasut <marex@denx.de>
To: linux-arm-kernel@lists.infradead.org
Cc: Marek Vasut <marex@denx.de>,
Alexandre Torgue <alexandre.torgue@st.com>,
Patrice Chotard <patrice.chotard@st.com>,
Patrick Delaunay <patrick.delaunay@st.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
linux-stm32@st-md-mailman.stormreply.com
Subject: [PATCH V2 18/22] ARM: dts: stm32: Add alternate pinmux for LTDC pins
Date: Tue, 31 Mar 2020 02:56:57 +0200 [thread overview]
Message-ID: <20200331005701.283998-19-marex@denx.de> (raw)
In-Reply-To: <20200331005701.283998-1-marex@denx.de>
Add new mux option for LTDC pins, this is used on AV96 board.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
---
V2: No change
---
arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 74 ++++++++++++++++++++++++
1 file changed, 74 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index 4f3b40d5751f..d820b3d3ab57 100644
--- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -532,6 +532,80 @@ pins {
};
};
+ ltdc_pins_c: ltdc-c-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 7, AF14)>; /* LCD_CLK */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */
+ <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */
+ <STM32_PINMUX('E', 13, AF14)>, /* LCD_DE */
+ <STM32_PINMUX('G', 13, AF14)>, /* LCD_R0 */
+ <STM32_PINMUX('H', 3, AF14)>, /* LCD_R1 */
+ <STM32_PINMUX('H', 8, AF14)>, /* LCD_R2 */
+ <STM32_PINMUX('H', 9, AF14)>, /* LCD_R3 */
+ <STM32_PINMUX('A', 5, AF14)>, /* LCD_R4 */
+ <STM32_PINMUX('H', 11, AF14)>, /* LCD_R5 */
+ <STM32_PINMUX('H', 12, AF14)>, /* LCD_R6 */
+ <STM32_PINMUX('E', 15, AF14)>, /* LCD_R7 */
+ <STM32_PINMUX('E', 5, AF14)>, /* LCD_G0 */
+ <STM32_PINMUX('B', 0, AF14)>, /* LCD_G1 */
+ <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */
+ <STM32_PINMUX('E', 11, AF14)>, /* LCD_G3 */
+ <STM32_PINMUX('H', 15, AF14)>, /* LCD_G4 */
+ <STM32_PINMUX('H', 4, AF9)>, /* LCD_G5 */
+ <STM32_PINMUX('I', 11, AF9)>, /* LCD_G6 */
+ <STM32_PINMUX('G', 8, AF14)>, /* LCD_G7 */
+ <STM32_PINMUX('D', 9, AF14)>, /* LCD_B0 */
+ <STM32_PINMUX('G', 12, AF14)>, /* LCD_B1 */
+ <STM32_PINMUX('G', 10, AF14)>, /* LCD_B2 */
+ <STM32_PINMUX('D', 10, AF14)>, /* LCD_B3 */
+ <STM32_PINMUX('E', 12, AF14)>, /* LCD_B4 */
+ <STM32_PINMUX('A', 3, AF14)>, /* LCD_B5 */
+ <STM32_PINMUX('B', 8, AF14)>, /* LCD_B6 */
+ <STM32_PINMUX('I', 7, AF14)>; /* LCD_B7 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ };
+
+ ltdc_pins_sleep_c: ltdc-c-1 {
+ pins {
+ pinmux = <STM32_PINMUX('G', 7, ANALOG)>, /* LCD_CLK */
+ <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */
+ <STM32_PINMUX('I', 9, ANALOG)>, /* LCD_VSYNC */
+ <STM32_PINMUX('E', 13, ANALOG)>, /* LCD_DE */
+ <STM32_PINMUX('G', 13, ANALOG)>, /* LCD_R0 */
+ <STM32_PINMUX('H', 3, ANALOG)>, /* LCD_R1 */
+ <STM32_PINMUX('H', 8, ANALOG)>, /* LCD_R2 */
+ <STM32_PINMUX('H', 9, ANALOG)>, /* LCD_R3 */
+ <STM32_PINMUX('A', 5, ANALOG)>, /* LCD_R4 */
+ <STM32_PINMUX('H', 11, ANALOG)>, /* LCD_R5 */
+ <STM32_PINMUX('H', 12, ANALOG)>, /* LCD_R6 */
+ <STM32_PINMUX('E', 15, ANALOG)>, /* LCD_R7 */
+ <STM32_PINMUX('E', 5, ANALOG)>, /* LCD_G0 */
+ <STM32_PINMUX('B', 0, ANALOG)>, /* LCD_G1 */
+ <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */
+ <STM32_PINMUX('E', 11, ANALOG)>, /* LCD_G3 */
+ <STM32_PINMUX('H', 15, ANALOG)>, /* LCD_G4 */
+ <STM32_PINMUX('H', 4, ANALOG)>, /* LCD_G5 */
+ <STM32_PINMUX('I', 11, ANALOG)>, /* LCD_G6 */
+ <STM32_PINMUX('G', 8, ANALOG)>, /* LCD_G7 */
+ <STM32_PINMUX('D', 9, ANALOG)>, /* LCD_B0 */
+ <STM32_PINMUX('G', 12, ANALOG)>, /* LCD_B1 */
+ <STM32_PINMUX('G', 10, ANALOG)>, /* LCD_B2 */
+ <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B3 */
+ <STM32_PINMUX('E', 12, ANALOG)>, /* LCD_B4 */
+ <STM32_PINMUX('A', 3, ANALOG)>, /* LCD_B5 */
+ <STM32_PINMUX('B', 8, ANALOG)>, /* LCD_B6 */
+ <STM32_PINMUX('I', 7, ANALOG)>; /* LCD_B7 */
+ };
+ };
+
m_can1_pins_a: m-can1-0 {
pins1 {
pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-03-31 1:02 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-31 0:56 [PATCH V2 00/22] ARM: dts: stm32: Repair AV96 board Marek Vasut
2020-03-31 0:56 ` [PATCH V2 01/22] ARM: dts: stm32: Add alternate pinmux for ethernet RGMII Marek Vasut
2020-03-31 4:13 ` Manivannan Sadhasivam
2020-03-31 0:56 ` [PATCH V2 02/22] ARM: dts: stm32: Repair ethernet operation on AV96 Marek Vasut
2020-03-31 4:13 ` Manivannan Sadhasivam
2020-03-31 0:56 ` [PATCH V2 03/22] ARM: dts: stm32: Add missing ethernet PHY reset " Marek Vasut
2020-03-31 4:21 ` Manivannan Sadhasivam
2020-03-31 0:56 ` [PATCH V2 04/22] ARM: dts: stm32: Add missing ethernet PHY skews " Marek Vasut
2020-03-31 4:22 ` Manivannan Sadhasivam
2020-03-31 0:56 ` [PATCH V2 05/22] ARM: dts: stm32: Add alternate pinmux for SDMMC1 direction pins Marek Vasut
2020-03-31 4:28 ` Manivannan Sadhasivam
2020-03-31 0:56 ` [PATCH V2 06/22] ARM: dts: stm32: Repair SDMMC1 operation on AV96 Marek Vasut
2020-03-31 4:33 ` Manivannan Sadhasivam
2020-03-31 13:36 ` Marek Vasut
2020-03-31 14:02 ` Manivannan Sadhasivam
2020-03-31 15:45 ` Marek Vasut
2020-03-31 0:56 ` [PATCH V2 07/22] ARM: dts: stm32: Add alternate pinmux for SDMMC2 pins 4-7 Marek Vasut
2020-03-31 4:36 ` Manivannan Sadhasivam
2020-03-31 0:56 ` [PATCH V2 08/22] ARM: dts: stm32: Add eMMC attached to SDMMC2 on AV96 Marek Vasut
2020-03-31 4:43 ` Manivannan Sadhasivam
2020-03-31 15:46 ` Marek Vasut
2020-03-31 0:56 ` [PATCH V2 09/22] ARM: dts: stm32: Repair PMIC configuration " Marek Vasut
2020-03-31 0:56 ` [PATCH V2 10/22] ARM: dts: stm32: Repair PMIC interrupt " Marek Vasut
2020-03-31 0:56 ` [PATCH V2 11/22] ARM: dts: stm32: Add QSPI NOR " Marek Vasut
2020-03-31 0:56 ` [PATCH V2 12/22] ARM: dts: stm32: Add configuration EEPROM " Marek Vasut
2020-03-31 6:34 ` Manivannan Sadhasivam
2020-03-31 0:56 ` [PATCH V2 13/22] ARM: dts: stm32: Enable GPU " Marek Vasut
2020-03-31 6:36 ` Manivannan Sadhasivam
2020-03-31 0:56 ` [PATCH V2 14/22] ARM: dts: stm32: Add alternate pinmux for SDMMC3 pins Marek Vasut
2020-03-31 6:40 ` Manivannan Sadhasivam
2020-03-31 0:56 ` [PATCH V2 15/22] ARM: dts: stm32: Enable WiFi on AV96 Marek Vasut
2020-03-31 6:43 ` Manivannan Sadhasivam
2020-03-31 0:56 ` [PATCH V2 16/22] ARM: dts: stm32: Add alternate pinmux for USART2 pins Marek Vasut
2020-03-31 6:46 ` Manivannan Sadhasivam
2020-03-31 0:56 ` [PATCH V2 17/22] ARM: dts: stm32: Enable Bluetooth on AV96 Marek Vasut
2020-03-31 6:47 ` Manivannan Sadhasivam
2020-03-31 0:56 ` Marek Vasut [this message]
2020-03-31 0:56 ` [PATCH V2 19/22] ARM: dts: stm32: Add bindings for HDMI video " Marek Vasut
2020-03-31 0:56 ` [PATCH V2 20/22] ARM: dts: stm32: Add bindings for audio " Marek Vasut
2020-03-31 0:57 ` [PATCH V2 21/22] ARM: dts: stm32: Add bindings for USB " Marek Vasut
2020-03-31 0:57 ` [PATCH V2 22/22] ARM: dts: stm32: Rename LEDs to match silkscreen " Marek Vasut
2020-03-31 4:09 ` Manivannan Sadhasivam
2020-03-31 4:07 ` [PATCH V2 00/22] ARM: dts: stm32: Repair AV96 board Manivannan Sadhasivam
2020-03-31 13:44 ` Marek Vasut
2020-03-31 14:09 ` Manivannan Sadhasivam
2020-03-31 15:51 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200331005701.283998-19-marex@denx.de \
--to=marex@denx.de \
--cc=alexandre.torgue@st.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=manivannan.sadhasivam@linaro.org \
--cc=mcoquelin.stm32@gmail.com \
--cc=patrice.chotard@st.com \
--cc=patrick.delaunay@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox