[PATCH v1 0/3] scsi: ufs-mediatek: Fix clk-gating and introduce low-power mode for vccq2

[PATCH v1 0/3] scsi: ufs-mediatek: Fix clk-gating and introduce low-power mode for vccq2

[Stanley Chu]

Hi,
This patchset fixes a clk-gating issue and introduces low-power mode for vccq2 in MediaTek platforms.

Stanley Chu (3):
  scsi: ufs-mediatek: Fix imprecise waiting time for ref-clk control
  scsi: ufs-mediatek: Do not gate clocks if auto-hibern8 is not entered
    yet
  scsi: ufs-mediatek: Introduce low-power mode for device power supply

 drivers/scsi/ufs/ufs-mediatek.c | 64 ++++++++++++++++++++++++++-------
 drivers/scsi/ufs/ufs-mediatek.h |  2 +-
 2 files changed, 53 insertions(+), 13 deletions(-)

-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v1 1/3] scsi: ufs-mediatek: Fix imprecise waiting time for ref-clk control

[Stanley Chu]

Currently ref-clk control timeout is implemented by Jiffies. However
jiffies is not accurate enough thus "false timeout" may happen.

Use more accurate delay mechanism instead, for example, ktime.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Andy Teng <andy.teng@mediatek.com>
---
 drivers/scsi/ufs/ufs-mediatek.c | 7 ++++---
 drivers/scsi/ufs/ufs-mediatek.h | 2 +-
 2 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/ufs/ufs-mediatek.c b/drivers/scsi/ufs/ufs-mediatek.c
index d56ce8d97d4e..523ee5573921 100644
--- a/drivers/scsi/ufs/ufs-mediatek.c
+++ b/drivers/scsi/ufs/ufs-mediatek.c
@@ -120,7 +120,7 @@ static int ufs_mtk_setup_ref_clk(struct ufs_hba *hba, bool on)
 {
 	struct ufs_mtk_host *host = ufshcd_get_variant(hba);
 	struct arm_smccc_res res;
-	unsigned long timeout;
+	ktime_t timeout, time_checked;
 	u32 value;
 
 	if (host->ref_clk_enabled == on)
@@ -135,8 +135,9 @@ static int ufs_mtk_setup_ref_clk(struct ufs_hba *hba, bool on)
 	}
 
 	/* Wait for ack */
-	timeout = jiffies + msecs_to_jiffies(REFCLK_REQ_TIMEOUT_MS);
+	timeout = ktime_add_us(ktime_get(), REFCLK_REQ_TIMEOUT_US);
 	do {
+		time_checked = ktime_get();
 		value = ufshcd_readl(hba, REG_UFS_REFCLK_CTRL);
 
 		/* Wait until ack bit equals to req bit */
@@ -144,7 +145,7 @@ static int ufs_mtk_setup_ref_clk(struct ufs_hba *hba, bool on)
 			goto out;
 
 		usleep_range(100, 200);
-	} while (time_before(jiffies, timeout));
+	} while (ktime_before(time_checked, timeout));
 
 	dev_err(hba->dev, "missing ack of refclk req, reg: 0x%x\n", value);
 
diff --git a/drivers/scsi/ufs/ufs-mediatek.h b/drivers/scsi/ufs/ufs-mediatek.h
index 5bbd3e9cbae2..fc42dcbfd800 100644
--- a/drivers/scsi/ufs/ufs-mediatek.h
+++ b/drivers/scsi/ufs/ufs-mediatek.h
@@ -28,7 +28,7 @@
 #define REFCLK_REQUEST              BIT(0)
 #define REFCLK_ACK                  BIT(1)
 
-#define REFCLK_REQ_TIMEOUT_MS       3
+#define REFCLK_REQ_TIMEOUT_US       3000
 
 /*
  * Vendor specific pre-defined parameters
-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v1 2/3] scsi: ufs-mediatek: Do not gate clocks if auto-hibern8 is not entered yet

[Stanley Chu]

There are some chances that link enters hibern8 lately by auto-hibern8
scheme during the clock-gating flow. Clocks shall not be gated if link
is still active otherwise host or device may hang.

Fix this by returning error code to the caller __ufshcd_setup_clocks()
to skip gating clocks there if link is not confirmed in hibern8
state yet.

Also allow some waiting time for the hibern8 state transition.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Andy Teng <andy.teng@mediatek.com>
---
 drivers/scsi/ufs/ufs-mediatek.c | 36 ++++++++++++++++++++++++---------
 1 file changed, 27 insertions(+), 9 deletions(-)

diff --git a/drivers/scsi/ufs/ufs-mediatek.c b/drivers/scsi/ufs/ufs-mediatek.c
index 523ee5573921..3c85f5e97dea 100644
--- a/drivers/scsi/ufs/ufs-mediatek.c
+++ b/drivers/scsi/ufs/ufs-mediatek.c
@@ -178,15 +178,30 @@ static void ufs_mtk_setup_ref_clk_wait_us(struct ufs_hba *hba,
 	host->ref_clk_ungating_wait_us = ungating_us;
 }
 
-static u32 ufs_mtk_link_get_state(struct ufs_hba *hba)
+int ufs_mtk_wait_link_state(struct ufs_hba *hba, u32 state,
+			    unsigned long max_wait_ms)
 {
+	ktime_t timeout, time_checked;
 	u32 val;
 
-	ufshcd_writel(hba, 0x20, REG_UFS_DEBUG_SEL);
-	val = ufshcd_readl(hba, REG_UFS_PROBE);
-	val = val >> 28;
+	timeout = ktime_add_us(ktime_get(), ms_to_ktime(max_wait_ms));
+	do {
+		time_checked = ktime_get();
+		ufshcd_writel(hba, 0x20, REG_UFS_DEBUG_SEL);
+		val = ufshcd_readl(hba, REG_UFS_PROBE);
+		val = val >> 28;
+
+		if (val == state)
+			return 0;
 
-	return val;
+		/* Sleep for max. 200us */
+		usleep_range(100, 200);
+	} while (ktime_before(time_checked, timeout));
+
+	if (val == state)
+		return 0;
+
+	return -ETIMEDOUT;
 }
 
 /**
@@ -221,10 +236,13 @@ static int ufs_mtk_setup_clocks(struct ufs_hba *hba, bool on,
 			 * triggered by Auto-Hibern8.
 			 */
 			if (!ufshcd_can_hibern8_during_gating(hba) &&
-			    ufshcd_is_auto_hibern8_enabled(hba) &&
-			    ufs_mtk_link_get_state(hba) ==
-			    VS_LINK_HIBERN8)
-				ufs_mtk_setup_ref_clk(hba, on);
+			    ufshcd_is_auto_hibern8_enabled(hba)) {
+				ret = ufs_mtk_wait_link_state(hba,
+							      VS_LINK_HIBERN8,
+							      15);
+				if (!ret)
+					ufs_mtk_setup_ref_clk(hba, on);
+			}
 		}
 	} else if (on && status == POST_CHANGE) {
 		ret = phy_power_on(host->mphy);
-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v1 3/3] scsi: ufs-mediatek: Introduce low-power mode for device power supply

[Stanley Chu]

Allow device power supply to enter low-power mode if device will
do nothing to save more power.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Pengshun Zhao <pengshun.zhao@mediatek.com>
---
 drivers/scsi/ufs/ufs-mediatek.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/drivers/scsi/ufs/ufs-mediatek.c b/drivers/scsi/ufs/ufs-mediatek.c
index 3c85f5e97dea..5f41b7b7db8f 100644
--- a/drivers/scsi/ufs/ufs-mediatek.c
+++ b/drivers/scsi/ufs/ufs-mediatek.c
@@ -12,6 +12,7 @@
 #include <linux/of_address.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
 #include <linux/soc/mediatek/mtk_sip_svc.h>
 
 #include "ufshcd.h"
@@ -521,6 +522,19 @@ static int ufs_mtk_link_set_lpm(struct ufs_hba *hba)
 	return 0;
 }
 
+static void ufs_mtk_vreg_set_lpm(struct ufs_hba *hba, bool lpm)
+{
+	if (!hba->vreg_info.vccq2)
+		return;
+
+	if (lpm & !hba->vreg_info.vcc->enabled)
+		regulator_set_mode(hba->vreg_info.vccq2->reg,
+				   REGULATOR_MODE_IDLE);
+	else if (!lpm)
+		regulator_set_mode(hba->vreg_info.vccq2->reg,
+				   REGULATOR_MODE_NORMAL);
+}
+
 static int ufs_mtk_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 {
 	int err;
@@ -537,6 +551,12 @@ static int ufs_mtk_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 			ufshcd_set_link_off(hba);
 			return -EAGAIN;
 		}
+		/*
+		 * Make sure no error will be returned to prevent
+		 * ufshcd_suspend() re-enabling regulators while vreg is still
+		 * in low-power mode.
+		 */
+		ufs_mtk_vreg_set_lpm(hba, true);
 	}
 
 	if (!ufshcd_is_link_active(hba))
@@ -554,6 +574,7 @@ static int ufs_mtk_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 		phy_power_on(host->mphy);
 
 	if (ufshcd_is_link_hibern8(hba)) {
+		ufs_mtk_vreg_set_lpm(hba, false);
 		err = ufs_mtk_link_set_hpm(hba);
 		if (err) {
 			err = ufshcd_link_recovery(hba);
-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel