Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v2] arm64: defconfig: Enable GPIO and I2C configs for TI's J721e platform
@ 2020-11-02 18:30 Faiz Abbas
  2020-11-02 19:34 ` Nishanth Menon
  0 siblings, 1 reply; 2+ messages in thread
From: Faiz Abbas @ 2020-11-02 18:30 UTC (permalink / raw)
  To: linux-kernel, linux-arm-kernel
  Cc: nm, catalin.marinas, faiz_abbas, will, t-kristo

Add configs to help enable regulators that supply power to the SD card
on TI's J721e platform. These regulators are controlled by either
SoC gpios or gpios over i2c expander.

Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
---

Changes in v2: Squashed changes into a single patch

v1: https://lore.kernel.org/linux-arm-kernel/20201002164535.9920-1-faiz_abbas@ti.com/

 arch/arm64/configs/defconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 5cfe3cf6f2ac..bbf42faaddfe 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -438,6 +438,7 @@ CONFIG_I2C_IMX=y
 CONFIG_I2C_IMX_LPI2C=y
 CONFIG_I2C_MESON=y
 CONFIG_I2C_MV64XXX=y
+CONFIG_I2C_OMAP=y
 CONFIG_I2C_OWL=y
 CONFIG_I2C_PXA=y
 CONFIG_I2C_QCOM_CCI=m
@@ -497,6 +498,7 @@ CONFIG_PINCTRL_SDM845=y
 CONFIG_PINCTRL_SM8150=y
 CONFIG_PINCTRL_SM8250=y
 CONFIG_GPIO_ALTERA=m
+CONFIG_GPIO_DAVINCI=y
 CONFIG_GPIO_DWAPB=y
 CONFIG_GPIO_MB86S7X=y
 CONFIG_GPIO_MPC8XXX=y
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2020-11-02 19:35 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-11-02 18:30 [PATCH v2] arm64: defconfig: Enable GPIO and I2C configs for TI's J721e platform Faiz Abbas
2020-11-02 19:34 ` Nishanth Menon

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox