public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: Cristian Marussi <cristian.marussi@arm.com>
To: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: mikhail.golubev@opensynergy.com, Igor.Skalkin@opensynergy.com,
	jbhayana@google.com, sudeep.holla@arm.com,
	peter.hilber@opensynergy.com,
	Cristian Marussi <cristian.marussi@arm.com>,
	james.quinlan@broadcom.com, Jonathan.Cameron@Huawei.com,
	egranata@google.com, lukasz.luba@arm.com
Subject: [PATCH v4 5/6] firmware: arm_scmi: add SCMIv3.0 Sensor configuration support
Date: Thu, 19 Nov 2020 17:49:05 +0000	[thread overview]
Message-ID: <20201119174906.43862-6-cristian.marussi@arm.com> (raw)
In-Reply-To: <20201119174906.43862-1-cristian.marussi@arm.com>

Add SCMIv3.0 Sensor support for CONFIG_GET/CONFIG_SET commands.

Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
---
v3 --> v4
- dropped single field structs
---
 drivers/firmware/arm_scmi/sensors.c | 63 +++++++++++++++++++++++++++++
 include/linux/scmi_protocol.h       | 37 +++++++++++++++++
 2 files changed, 100 insertions(+)

diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c
index 2239af5f9e6e..10c271d430e7 100644
--- a/drivers/firmware/arm_scmi/sensors.c
+++ b/drivers/firmware/arm_scmi/sensors.c
@@ -23,6 +23,8 @@ enum scmi_sensor_protocol_cmd {
 	SENSOR_READING_GET = 0x6,
 	SENSOR_AXIS_DESCRIPTION_GET = 0x7,
 	SENSOR_LIST_UPDATE_INTERVALS = 0x8,
+	SENSOR_CONFIG_GET = 0x9,
+	SENSOR_CONFIG_SET = 0xA,
 };
 
 struct scmi_msg_resp_sensor_attributes {
@@ -149,6 +151,11 @@ struct scmi_msg_set_sensor_trip_point {
 	__le32 value_high;
 };
 
+struct scmi_msg_sensor_config_set {
+	__le32 id;
+	__le32 sensor_config;
+};
+
 struct scmi_msg_sensor_reading_get {
 	__le32 id;
 	__le32 flags;
@@ -592,6 +599,60 @@ scmi_sensor_trip_point_config(const struct scmi_handle *handle, u32 sensor_id,
 	return ret;
 }
 
+static int scmi_sensor_config_get(const struct scmi_handle *handle,
+				  u32 sensor_id, u32 *sensor_config)
+{
+	int ret;
+	struct scmi_xfer *t;
+
+	ret = scmi_xfer_get_init(handle, SENSOR_CONFIG_GET,
+				 SCMI_PROTOCOL_SENSOR, sizeof(__le32),
+				 sizeof(__le32), &t);
+	if (ret)
+		return ret;
+
+	put_unaligned_le32(cpu_to_le32(sensor_id), t->tx.buf);
+	ret = scmi_do_xfer(handle, t);
+	if (!ret) {
+		struct sensors_info *si = handle->sensor_priv;
+		struct scmi_sensor_info *s = si->sensors + sensor_id;
+
+		*sensor_config = get_unaligned_le64(t->rx.buf);
+		s->sensor_config = *sensor_config;
+	}
+
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+static int scmi_sensor_config_set(const struct scmi_handle *handle,
+				  u32 sensor_id, u32 sensor_config)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_msg_sensor_config_set *msg;
+
+	ret = scmi_xfer_get_init(handle, SENSOR_CONFIG_SET,
+				 SCMI_PROTOCOL_SENSOR, sizeof(*msg), 0, &t);
+	if (ret)
+		return ret;
+
+	msg = t->tx.buf;
+	msg->id = cpu_to_le32(sensor_id);
+	msg->sensor_config = cpu_to_le32(sensor_config);
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret) {
+		struct sensors_info *si = handle->sensor_priv;
+		struct scmi_sensor_info *s = si->sensors + sensor_id;
+
+		s->sensor_config = sensor_config;
+	}
+
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
 /**
  * scmi_sensor_reading_get  - Read scalar sensor value
  * @handle: Platform handle
@@ -745,6 +806,8 @@ static const struct scmi_sensor_ops sensor_ops = {
 	.trip_point_config = scmi_sensor_trip_point_config,
 	.reading_get = scmi_sensor_reading_get,
 	.reading_get_timestamped = scmi_sensor_reading_get_timestamped,
+	.config_get = scmi_sensor_config_get,
+	.config_set = scmi_sensor_config_set,
 };
 
 static int scmi_sensor_set_notify_enabled(const struct scmi_handle *handle,
diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h
index 0c52bf0cbee4..7e9e2cd3d46b 100644
--- a/include/linux/scmi_protocol.h
+++ b/include/linux/scmi_protocol.h
@@ -286,7 +286,38 @@ struct scmi_sensor_info {
 	unsigned int num_axis;
 	struct scmi_sensor_axis_info *axis;
 	struct scmi_sensor_intervals_info intervals;
+	unsigned int sensor_config;
+#define SCMI_SENS_CFG_UPDATE_SECS_MASK		GENMASK(31, 16)
+#define SCMI_SENS_CFG_GET_UPDATE_SECS(x)				\
+	FIELD_GET(SCMI_SENS_CFG_UPDATE_SECS_MASK, (x))
+
+#define SCMI_SENS_CFG_UPDATE_EXP_MASK		GENMASK(15, 11)
+#define SCMI_SENS_CFG_GET_UPDATE_EXP(x)					\
+	({								\
+		int __signed_exp =					\
+			FIELD_GET(SCMI_SENS_CFG_UPDATE_EXP_MASK, (x));	\
+									\
+		if (__signed_exp & BIT(4))				\
+			__signed_exp |= GENMASK(31, 5);			\
+		__signed_exp;						\
+	})
+
+#define SCMI_SENS_CFG_ROUND_MASK		GENMASK(10, 9)
+#define SCMI_SENS_CFG_ROUND_AUTO		2
+#define SCMI_SENS_CFG_ROUND_UP			1
+#define SCMI_SENS_CFG_ROUND_DOWN		0
+
+#define SCMI_SENS_CFG_TSTAMP_ENABLED_MASK	BIT(1)
+#define SCMI_SENS_CFG_TSTAMP_ENABLE		1
+#define SCMI_SENS_CFG_TSTAMP_DISABLE		0
+#define SCMI_SENS_CFG_IS_TSTAMP_ENABLED(x)				\
+	FIELD_GET(SCMI_SENS_CFG_TSTAMP_ENABLED_MASK, (x))
+
+#define SCMI_SENS_CFG_SENSOR_ENABLED_MASK	BIT(0)
+#define SCMI_SENS_CFG_SENSOR_ENABLE		1
+#define SCMI_SENS_CFG_SENSOR_DISABLE		0
 	char name[SCMI_MAX_STR_SIZE];
+#define SCMI_SENS_CFG_IS_ENABLED(x)		FIELD_GET(BIT(0), (x))
 	bool extended_scalar_attrs;
 	unsigned int sensor_power;
 	unsigned int resolution;
@@ -409,6 +440,8 @@ enum scmi_sensor_class {
  *			     Supports multi-axis sensors for sensors which
  *			     supports it and if the @reading array size of
  *			     @count entry equals the sensor num_axis
+ * @config_get: Get sensor current configuration
+ * @config_set: Set sensor current configuration
  */
 struct scmi_sensor_ops {
 	int (*count_get)(const struct scmi_handle *handle);
@@ -421,6 +454,10 @@ struct scmi_sensor_ops {
 	int (*reading_get_timestamped)(const struct scmi_handle *handle,
 				       u32 sensor_id, u8 count,
 				       struct scmi_sensor_reading *readings);
+	int (*config_get)(const struct scmi_handle *handle,
+			  u32 sensor_id, u32 *sensor_config);
+	int (*config_set)(const struct scmi_handle *handle,
+			  u32 sensor_id, u32 sensor_config);
 };
 
 /**
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2020-11-19 17:51 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-19 17:49 [PATCH v4 0/6] SCMIv3.0 Sensor Extensions Cristian Marussi
2020-11-19 17:49 ` [PATCH v4 1/6] firmware: arm_scmi: rework scmi_sensors_protocol_init Cristian Marussi
2020-11-19 17:49 ` [PATCH v4 2/6] firmware: arm_scmi: add SCMIv3.0 Sensors descriptors extensions Cristian Marussi
2020-11-19 17:49 ` [PATCH v4 3/6] hwmon: scmi: update hwmon internal scale data type Cristian Marussi
2020-11-19 17:59   ` Sudeep Holla
2020-11-21 16:59   ` Guenter Roeck
2020-11-23 10:00     ` Sudeep Holla
2020-11-19 17:49 ` [PATCH v4 4/6] firmware: arm_scmi: add SCMIv3.0 Sensors timestamped reads Cristian Marussi
2020-11-19 17:49 ` Cristian Marussi [this message]
2020-11-19 17:49 ` [PATCH v4 6/6] firmware: arm_scmi: add SCMIv3.0 Sensor notifications Cristian Marussi
2020-11-23 10:43 ` [PATCH v4 0/6] SCMIv3.0 Sensor Extensions Sudeep Holla

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201119174906.43862-6-cristian.marussi@arm.com \
    --to=cristian.marussi@arm.com \
    --cc=Igor.Skalkin@opensynergy.com \
    --cc=Jonathan.Cameron@Huawei.com \
    --cc=egranata@google.com \
    --cc=james.quinlan@broadcom.com \
    --cc=jbhayana@google.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lukasz.luba@arm.com \
    --cc=mikhail.golubev@opensynergy.com \
    --cc=peter.hilber@opensynergy.com \
    --cc=sudeep.holla@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox