Re: [PATCH v11 0/8] PCI: imx6: refine codes and add the error propagation

[Bjorn Helgaas <helgaas@kernel.org>]

On Tue, Jun 14, 2022 at 02:58:54PM +0800, Richard Zhu wrote:
> This series patches refine pci-imx6 driver and do the following main changes.
> - Encapsulate the clock enable into one standalone function
> - Add the error propagation from host_init and resume
> - Turn off regulator when the system is in suspend mode
> - Let the probe successfully when link never comes up
> - Do not hide the phy driver callbacks in core reset and clk_enable.
> BTW, this series are verified on i.MX8MM EVK board when one NVME is used.

I applied these on pci/ctrl/imx6, but I noticed a few more things
while applying, so I'm going to post a v12 with a little rework for
your approval.

> Main changes from v10 to v11:
> No code changes, just do the following operations refer to Bjorn's comments.
>   - Split #6 patch into two patches.
>   - Rebase to v5.19-rc1 based on for-next branch of Shawn's git.
> 
> Main changes from v9 to v10:
> - Add the "Reviewed-by: Lucas Stach <l.stach@pengutronix.de>" tag into #3
>   and #4 patches.
> - Refer to Bjorn's comments:
>   - refine the commit of the first patch
>   - keep alignment of the message format in the second patch
>   - More specific commit and subject of the #5 and #7 patches.
> - Move the regualtor_disable into suspend, turn off the regulator when bus
>   is powered off and system in suspend mode.
> - Let the driver probe successfully, return zero in imx6_pcie_start_link()
>   when PCIe link is down. 
>   In this link down scenario, only start the PCIe link training in resume
>   when the link is up before system suspend to avoid the long latency in
>   the link training period.
> - Don't hide phy driver callbacks in core reset and clk_enable, and refine
>   the error handling accordingly.
> - Drop the #8 patch of v9 series, since the clocks and powers are not gated
>   off anymore when link is down.
> 
> Main changes from v8 to v9:
> - Don't change pcie-designware codes, and do the error exit process only in
>   pci-imx6 driver internally.
> - Move the phy driver callbacks to the proper places
> 
> Main changes from v7 to v8:
> Regarding Bjorn's review comments.
> - Align the format of the dev_info message and refine commit log of
>   #6/7/8 patches.
> - Rename the err_reset_phy label, since there is no PHY reset in the out
> 
> Main changes from v6 to v7:
> - Keep the regulator usage counter balance in the #5 patch of v6 series.
> 
> Main changes from v5 to v6:
> - Refer to the following discussion with Fabio, fix the dump by his patch.
>   https://patchwork.kernel.org/project/linux-pci/patch/1641368602-20401-6-git-send-email-hongxing.zhu@nxp.com/
>   Refine and rebase this patch-set after Fabio' dump fix patch is merged.
> - Add one new #4 patch to disable i.MX6QDL REF clock too when disable clocks
> - Split the regulator refine codes into one standalone patch #5 in this version.
> 
> Main changes from v4 to v5:
> - Since i.MX8MM PCIe support had been merged. Based on Lorenzo's git repos,
>   resend the patch-set after rebase.
> 
> Main changes from v3 to v4:
> - Regarding Mark's comments, delete the regulator_is_enabled() check.
> - Squash #3 and #6 of v3 patch into #5 patch of v4 set.
> 
> Main changes from v2 to v3:
> - Add "Reviewed-by: Lucas Stach <l.stach@pengutronix.de>" tag into
>   first two patches.
> - Add a Fixes tag into #3 patch.
> - Split the #4 of v2 to two patches, one is clock disable codes move,
>   the other one is the acutal clock unbalance fix.
> - Add a new host_exit() callback into dw_pcie_host_ops, then it could be
>   invoked to handle the unbalance issue in the error handling after
>   host_init() function when link is down.
> - Add a new host_exit() callback for i.MX PCIe driver to handle this case
>   in the error handling after host_init.
> 
> Main changes from v1 to v2:
> Regarding Lucas' comments.
>   - Move the placement of the new imx6_pcie_clk_enable() to avoid the
>     forward declarition.
>   - Seperate the second patch of v1 patch-set to three patches.
>   - Use the module_param to replace the kernel command line.
> Regarding Bjorn's comments:
>   - Use the cover-letter for a multi-patch series.
>   - Correct the subject line, and refine the commit logs. For example,
>     remove the timestamp of the logs.
> 
> drivers/pci/controller/dwc/pci-imx6.c | 241 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-------------------------------------
> 1 file changed, 157 insertions(+), 84 deletions(-)
> [PATCH v11 1/8] PCI: imx6: Encapsulate the clock enable into one
> [PATCH v11 2/8] PCI: imx6: Add the error propagation from host_init
> [PATCH v11 3/8] PCI: imx6: Move imx6_pcie_clk_disable() earlier
> [PATCH v11 4/8] PCI: imx6: Disable iMX6QDL PCIe REF clock when
> [PATCH v11 5/8] PCI: imx6: Turn off regulator when the system is in
> [PATCH v11 6/8] PCI: imx6: Mark the link down as none fatal error
> [PATCH v11 7/8] PCI: imx6: Reduce resume time by only starting link
> [PATCH v11 8/8] PCI: imx6: Do not hide phy driver callbacks and

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel