From: Claudiu Beznea <claudiu.beznea@microchip.com>
To: <eugen.hristev@microchip.com>, <jic23@kernel.org>,
<lars@metafoo.de>, <nicolas.ferre@microchip.com>,
<alexandre.belloni@bootlin.com>,
<ludovic.desroches@microchip.com>, <robh+dt@kernel.org>
Cc: <linux-iio@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
Claudiu Beznea <claudiu.beznea@microchip.com>
Subject: [PATCH v3 09/19] iio: adc: at91-sama5d2_adc: add .read_avail() chan_info ops
Date: Wed, 3 Aug 2022 13:28:45 +0300 [thread overview]
Message-ID: <20220803102855.2191070-10-claudiu.beznea@microchip.com> (raw)
In-Reply-To: <20220803102855.2191070-1-claudiu.beznea@microchip.com>
Add .read_avail() to chan_info ops which will retrieve the available
oversampling ratio.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
drivers/iio/adc/at91-sama5d2_adc.c | 50 +++++++++++++++++++++---------
1 file changed, 35 insertions(+), 15 deletions(-)
diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
index fe4bec03bea9..47caaf271fae 100644
--- a/drivers/iio/adc/at91-sama5d2_adc.c
+++ b/drivers/iio/adc/at91-sama5d2_adc.c
@@ -319,6 +319,8 @@ static const struct at91_adc_reg_layout sama7g5_layout = {
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\
BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
+ .info_mask_shared_by_all_available = \
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
.datasheet_name = "CH"#num, \
.indexed = 1, \
}
@@ -340,6 +342,8 @@ static const struct at91_adc_reg_layout sama7g5_layout = {
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\
BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
+ .info_mask_shared_by_all_available = \
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
.datasheet_name = "CH"#num"-CH"#num2, \
.indexed = 1, \
}
@@ -359,6 +363,8 @@ static const struct at91_adc_reg_layout sama7g5_layout = {
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\
BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
+ .info_mask_shared_by_all_available = \
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
.datasheet_name = name, \
}
#define AT91_SAMA5D2_CHAN_PRESSURE(num, name) \
@@ -374,6 +380,8 @@ static const struct at91_adc_reg_layout sama7g5_layout = {
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\
BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
+ .info_mask_shared_by_all_available = \
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
.datasheet_name = name, \
}
@@ -398,6 +406,8 @@ static const struct at91_adc_reg_layout sama7g5_layout = {
* than the total channel number)
* @hw_trig_cnt: number of possible hardware triggers
* @osr_mask: oversampling ratio bitmask on EMR register
+ * @oversampling_avail: available oversampling values
+ * @oversampling_avail_no: number of available oversampling values
*/
struct at91_adc_platform {
const struct at91_adc_reg_layout *layout;
@@ -410,6 +420,8 @@ struct at91_adc_platform {
unsigned int max_index;
unsigned int hw_trig_cnt;
unsigned int osr_mask;
+ unsigned int oversampling_avail[3];
+ unsigned int oversampling_avail_no;
};
/**
@@ -609,6 +621,8 @@ static const struct at91_adc_platform sama5d2_platform = {
#define AT91_SAMA5D2_HW_TRIG_CNT 3
.hw_trig_cnt = AT91_SAMA5D2_HW_TRIG_CNT,
.osr_mask = GENMASK(17, 16),
+ .oversampling_avail = { 1, 4, 16, },
+ .oversampling_avail_no = 3,
};
static const struct at91_adc_platform sama7g5_platform = {
@@ -625,6 +639,8 @@ static const struct at91_adc_platform sama7g5_platform = {
#define AT91_SAMA7G5_HW_TRIG_CNT 3
.hw_trig_cnt = AT91_SAMA7G5_HW_TRIG_CNT,
.osr_mask = GENMASK(18, 16),
+ .oversampling_avail = { 1, 4, 16, },
+ .oversampling_avail_no = 3,
};
static int at91_adc_chan_xlate(struct iio_dev *indio_dev, int chan)
@@ -1682,6 +1698,24 @@ static int at91_adc_write_raw(struct iio_dev *indio_dev,
}
}
+static int at91_adc_read_avail(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ const int **vals, int *type, int *length,
+ long mask)
+{
+ struct at91_adc_state *st = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ *vals = (int *)st->soc_info.platform->oversampling_avail;
+ *type = IIO_VAL_INT;
+ *length = st->soc_info.platform->oversampling_avail_no;
+ return IIO_AVAIL_LIST;
+ default:
+ return -EINVAL;
+ }
+}
+
static void at91_adc_dma_init(struct at91_adc_state *st)
{
struct device *dev = &st->indio_dev->dev;
@@ -1869,20 +1903,6 @@ static IIO_DEVICE_ATTR(hwfifo_watermark, 0444,
static IIO_CONST_ATTR(hwfifo_watermark_min, "2");
static IIO_CONST_ATTR(hwfifo_watermark_max, AT91_HWFIFO_MAX_SIZE_STR);
-static IIO_CONST_ATTR(oversampling_ratio_available,
- __stringify(1) " "
- __stringify(4) " "
- __stringify(16));
-
-static struct attribute *at91_adc_attributes[] = {
- &iio_const_attr_oversampling_ratio_available.dev_attr.attr,
- NULL,
-};
-
-static const struct attribute_group at91_adc_attribute_group = {
- .attrs = at91_adc_attributes,
-};
-
static const struct attribute *at91_adc_fifo_attributes[] = {
&iio_const_attr_hwfifo_watermark_min.dev_attr.attr,
&iio_const_attr_hwfifo_watermark_max.dev_attr.attr,
@@ -1892,7 +1912,7 @@ static const struct attribute *at91_adc_fifo_attributes[] = {
};
static const struct iio_info at91_adc_info = {
- .attrs = &at91_adc_attribute_group,
+ .read_avail = &at91_adc_read_avail,
.read_raw = &at91_adc_read_raw,
.write_raw = &at91_adc_write_raw,
.update_scan_mode = &at91_adc_update_scan_mode,
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-08-03 10:31 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-03 10:28 [PATCH v3 00/19] iio: adc: at91-sama5d2_adc: add support for temperature sensor Claudiu Beznea
2022-08-03 10:28 ` [PATCH v3 01/19] iio: adc: at91-sama5d2_adc: fix AT91_SAMA5D2_MR_TRACKTIM_MAX Claudiu Beznea
2022-08-03 10:28 ` [PATCH v3 02/19] iio: adc: at91-sama5d2_adc: check return status for pressure and touch Claudiu Beznea
2022-08-03 10:28 ` [PATCH v3 03/19] iio: adc: at91-sama5d2_adc: lock around oversampling and sample freq Claudiu Beznea
2022-08-03 10:28 ` [PATCH v3 04/19] iio: adc: at91-sama5d2_adc: disable/prepare buffer on suspend/resume Claudiu Beznea
2022-08-03 10:28 ` [PATCH v3 05/19] iio: adc: at91-sama5d2_adc: exit from write_raw() when buffers are enabled Claudiu Beznea
2022-08-03 10:28 ` [PATCH v3 06/19] iio: adc: at91-sama5d2_adc: handle different EMR.OSR for different hw versions Claudiu Beznea
2022-08-03 10:28 ` [PATCH v3 07/19] iio: adc: at91-sama5d2_adc: move the check of oversampling in its function Claudiu Beznea
2022-08-03 10:28 ` [PATCH v3 08/19] iio: adc: at91-sama5d2_adc: drop AT91_OSR_XSAMPLES defines Claudiu Beznea
2022-08-03 10:28 ` Claudiu Beznea [this message]
2022-08-03 10:28 ` [PATCH v3 10/19] iio: adc: at91-sama5d2_adc: adjust osr based on specific platform data Claudiu Beznea
2022-08-03 10:28 ` [PATCH v3 11/19] iio: adc: at91-sama5d2_adc: add 64 and 256 oversampling ratio Claudiu Beznea
2022-08-03 10:28 ` [PATCH v3 12/19] iio: adc: at91-sama5d2_adc: move oversampling storage in its function Claudiu Beznea
2022-08-03 10:28 ` [PATCH v3 13/19] iio: adc: at91-sama5d2_adc: update trackx on emr Claudiu Beznea
2022-08-03 10:28 ` [PATCH v3 14/19] iio: adc: at91-sama5d2_adc: add startup and tracktim as parameter for at91_adc_setup_samp_freq() Claudiu Beznea
2022-08-03 10:28 ` [PATCH v3 15/19] iio: adc: at91-sama5d2_adc: lock around at91_adc_read_info_raw() Claudiu Beznea
2022-08-03 10:28 ` [PATCH v3 16/19] dt-bindings: iio: adc: at91-sama5d2_adc: add id for temperature channel Claudiu Beznea
2022-08-03 10:28 ` [PATCH v3 17/19] iio: adc: at91-sama5d2_adc: add support for temperature sensor Claudiu Beznea
2022-08-03 10:28 ` [PATCH v3 18/19] iio: adc: at91-sama5d2_adc: add empty line after functions Claudiu Beznea
2022-08-03 10:28 ` [PATCH v3 19/19] iio: adc: at91-sama5d2_adc: add runtime pm support Claudiu Beznea
2022-08-06 14:10 ` [PATCH v3 00/19] iio: adc: at91-sama5d2_adc: add support for temperature sensor Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220803102855.2191070-10-claudiu.beznea@microchip.com \
--to=claudiu.beznea@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=eugen.hristev@microchip.com \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ludovic.desroches@microchip.com \
--cc=nicolas.ferre@microchip.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox