[PATCH v5 03/33] thermal/drivers/rockchip: Switch to new of API

[PATCH v5 03/33] thermal/drivers/rockchip: Switch to new of API

[Daniel Lezcano]

The thermal OF code has a new API allowing to migrate the OF
initialization to a simpler approach. The ops are no longer device
tree specific and are the generic ones provided by the core code.

Convert the ops to the thermal_zone_device_ops format and use the new
API to register the thermal zone with these generic ops.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org>
---
 drivers/thermal/rockchip_thermal.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index dc3a9c276a09..819e059cde71 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -1211,9 +1211,9 @@ static irqreturn_t rockchip_thermal_alarm_irq_thread(int irq, void *dev)
 	return IRQ_HANDLED;
 }
 
-static int rockchip_thermal_set_trips(void *_sensor, int low, int high)
+static int rockchip_thermal_set_trips(struct thermal_zone_device *tz, int low, int high)
 {
-	struct rockchip_thermal_sensor *sensor = _sensor;
+	struct rockchip_thermal_sensor *sensor = tz->devdata;
 	struct rockchip_thermal_data *thermal = sensor->thermal;
 	const struct rockchip_tsadc_chip *tsadc = thermal->chip;
 
@@ -1224,9 +1224,9 @@ static int rockchip_thermal_set_trips(void *_sensor, int low, int high)
 				     sensor->id, thermal->regs, high);
 }
 
-static int rockchip_thermal_get_temp(void *_sensor, int *out_temp)
+static int rockchip_thermal_get_temp(struct thermal_zone_device *tz, int *out_temp)
 {
-	struct rockchip_thermal_sensor *sensor = _sensor;
+	struct rockchip_thermal_sensor *sensor = tz->devdata;
 	struct rockchip_thermal_data *thermal = sensor->thermal;
 	const struct rockchip_tsadc_chip *tsadc = sensor->thermal->chip;
 	int retval;
@@ -1239,7 +1239,7 @@ static int rockchip_thermal_get_temp(void *_sensor, int *out_temp)
 	return retval;
 }
 
-static const struct thermal_zone_of_device_ops rockchip_of_thermal_ops = {
+static const struct thermal_zone_device_ops rockchip_of_thermal_ops = {
 	.get_temp = rockchip_thermal_get_temp,
 	.set_trips = rockchip_thermal_set_trips,
 };
@@ -1326,8 +1326,8 @@ rockchip_thermal_register_sensor(struct platform_device *pdev,
 
 	sensor->thermal = thermal;
 	sensor->id = id;
-	sensor->tzd = devm_thermal_zone_of_sensor_register(&pdev->dev, id,
-					sensor, &rockchip_of_thermal_ops);
+	sensor->tzd = devm_thermal_of_zone_register(&pdev->dev, id, sensor,
+						    &rockchip_of_thermal_ops);
 	if (IS_ERR(sensor->tzd)) {
 		error = PTR_ERR(sensor->tzd);
 		dev_err(&pdev->dev, "failed to register sensor %d: %d\n",
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 04/33] thermal/drivers/uniphier: Switch to new of API

[Daniel Lezcano]

The thermal OF code has a new API allowing to migrate the OF
initialization to a simpler approach. The ops are no longer device
tree specific and are the generic ones provided by the core code.

Convert the ops to the thermal_zone_device_ops format and use the new
API to register the thermal zone with these generic ops.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org>
---
 drivers/thermal/uniphier_thermal.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/thermal/uniphier_thermal.c b/drivers/thermal/uniphier_thermal.c
index 4cae5561a2a3..4111d99ef50e 100644
--- a/drivers/thermal/uniphier_thermal.c
+++ b/drivers/thermal/uniphier_thermal.c
@@ -187,9 +187,9 @@ static void uniphier_tm_disable_sensor(struct uniphier_tm_dev *tdev)
 	usleep_range(1000, 2000);	/* The spec note says at least 1ms */
 }
 
-static int uniphier_tm_get_temp(void *data, int *out_temp)
+static int uniphier_tm_get_temp(struct thermal_zone_device *tz, int *out_temp)
 {
-	struct uniphier_tm_dev *tdev = data;
+	struct uniphier_tm_dev *tdev = tz->devdata;
 	struct regmap *map = tdev->regmap;
 	int ret;
 	u32 temp;
@@ -204,7 +204,7 @@ static int uniphier_tm_get_temp(void *data, int *out_temp)
 	return 0;
 }
 
-static const struct thermal_zone_of_device_ops uniphier_of_thermal_ops = {
+static const struct thermal_zone_device_ops uniphier_of_thermal_ops = {
 	.get_temp = uniphier_tm_get_temp,
 };
 
@@ -289,8 +289,8 @@ static int uniphier_tm_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, tdev);
 
-	tdev->tz_dev = devm_thermal_zone_of_sensor_register(dev, 0, tdev,
-						&uniphier_of_thermal_ops);
+	tdev->tz_dev = devm_thermal_of_zone_register(dev, 0, tdev,
+						     &uniphier_of_thermal_ops);
 	if (IS_ERR(tdev->tz_dev)) {
 		dev_err(dev, "failed to register sensor device\n");
 		return PTR_ERR(tdev->tz_dev);
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 04/33] thermal/drivers/uniphier: Switch to new of API

[Kunihiko Hayashi]

On 2022/08/05 7:43, Daniel Lezcano wrote:
> The thermal OF code has a new API allowing to migrate the OF
> initialization to a simpler approach. The ops are no longer device
> tree specific and are the generic ones provided by the core code.
> 
> Convert the ops to the thermal_zone_device_ops format and use the new
> API to register the thermal zone with these generic ops.
> 
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org>

Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>

> ---
>   drivers/thermal/uniphier_thermal.c | 10 +++++-----
>   1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/thermal/uniphier_thermal.c
> b/drivers/thermal/uniphier_thermal.c
> index 4cae5561a2a3..4111d99ef50e 100644
> --- a/drivers/thermal/uniphier_thermal.c
> +++ b/drivers/thermal/uniphier_thermal.c
> @@ -187,9 +187,9 @@ static void uniphier_tm_disable_sensor(struct
> uniphier_tm_dev *tdev)
>   	usleep_range(1000, 2000);	/* The spec note says at least 1ms
> */
>   }
>   
> -static int uniphier_tm_get_temp(void *data, int *out_temp)
> +static int uniphier_tm_get_temp(struct thermal_zone_device *tz, int
> *out_temp)
>   {
> -	struct uniphier_tm_dev *tdev = data;
> +	struct uniphier_tm_dev *tdev = tz->devdata;
>   	struct regmap *map = tdev->regmap;
>   	int ret;
>   	u32 temp;
> @@ -204,7 +204,7 @@ static int uniphier_tm_get_temp(void *data, int
> *out_temp)
>   	return 0;
>   }
>   
> -static const struct thermal_zone_of_device_ops uniphier_of_thermal_ops =
> {
> +static const struct thermal_zone_device_ops uniphier_of_thermal_ops = {
>   	.get_temp = uniphier_tm_get_temp,
>   };
>   
> @@ -289,8 +289,8 @@ static int uniphier_tm_probe(struct platform_device
> *pdev)
>   
>   	platform_set_drvdata(pdev, tdev);
>   
> -	tdev->tz_dev = devm_thermal_zone_of_sensor_register(dev, 0, tdev,
> -						&uniphier_of_thermal_ops);
> +	tdev->tz_dev = devm_thermal_of_zone_register(dev, 0, tdev,
> +						
> &uniphier_of_thermal_ops);
>   	if (IS_ERR(tdev->tz_dev)) {
>   		dev_err(dev, "failed to register sensor device\n");
>   		return PTR_ERR(tdev->tz_dev);
> 

---
Best Regards
Kunihiko Hayashi

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 08/33] thermal/drivers/sun8i: Switch to new of API

[Daniel Lezcano]

The thermal OF code has a new API allowing to migrate the OF
initialization to a simpler approach. The ops are no longer device
tree specific and are the generic ones provided by the core code.

Convert the ops to the thermal_zone_device_ops format and use the new
API to register the thermal zone with these generic ops.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org>
---
 drivers/thermal/sun8i_thermal.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
index 212c87e63a66..e64d06d1328c 100644
--- a/drivers/thermal/sun8i_thermal.c
+++ b/drivers/thermal/sun8i_thermal.c
@@ -108,9 +108,9 @@ static int sun50i_h5_calc_temp(struct ths_device *tmdev,
 		return -1590 * reg / 10 + 276000;
 }
 
-static int sun8i_ths_get_temp(void *data, int *temp)
+static int sun8i_ths_get_temp(struct thermal_zone_device *tz, int *temp)
 {
-	struct tsensor *s = data;
+	struct tsensor *s = tz->devdata;
 	struct ths_device *tmdev = s->tmdev;
 	int val = 0;
 
@@ -135,7 +135,7 @@ static int sun8i_ths_get_temp(void *data, int *temp)
 	return 0;
 }
 
-static const struct thermal_zone_of_device_ops ths_ops = {
+static const struct thermal_zone_device_ops ths_ops = {
 	.get_temp = sun8i_ths_get_temp,
 };
 
@@ -468,10 +468,10 @@ static int sun8i_ths_register(struct ths_device *tmdev)
 		tmdev->sensor[i].tmdev = tmdev;
 		tmdev->sensor[i].id = i;
 		tmdev->sensor[i].tzd =
-			devm_thermal_zone_of_sensor_register(tmdev->dev,
-							     i,
-							     &tmdev->sensor[i],
-							     &ths_ops);
+			devm_thermal_of_zone_register(tmdev->dev,
+						      i,
+						      &tmdev->sensor[i],
+						      &ths_ops);
 		if (IS_ERR(tmdev->sensor[i].tzd))
 			return PTR_ERR(tmdev->sensor[i].tzd);
 
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 10/33] thermal/drivers/broadcom: Switch to new of API

[Daniel Lezcano]

The thermal OF code has a new API allowing to migrate the OF
initialization to a simpler approach. The ops are no longer device
tree specific and are the generic ones provided by the core code.

Convert the ops to the thermal_zone_device_ops format and use the new
API to register the thermal zone with these generic ops.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/thermal/broadcom/bcm2711_thermal.c | 14 +++---
 drivers/thermal/broadcom/bcm2835_thermal.c | 14 +++---
 drivers/thermal/broadcom/brcmstb_thermal.c | 20 ++++-----
 drivers/thermal/broadcom/ns-thermal.c      | 50 +++++++++-------------
 drivers/thermal/broadcom/sr-thermal.c      | 16 +++----
 5 files changed, 53 insertions(+), 61 deletions(-)

diff --git a/drivers/thermal/broadcom/bcm2711_thermal.c b/drivers/thermal/broadcom/bcm2711_thermal.c
index e9bef5c3414b..1f8651d15160 100644
--- a/drivers/thermal/broadcom/bcm2711_thermal.c
+++ b/drivers/thermal/broadcom/bcm2711_thermal.c
@@ -31,11 +31,11 @@ struct bcm2711_thermal_priv {
 	struct thermal_zone_device *thermal;
 };
 
-static int bcm2711_get_temp(void *data, int *temp)
+static int bcm2711_get_temp(struct thermal_zone_device *tz, int *temp)
 {
-	struct bcm2711_thermal_priv *priv = data;
-	int slope = thermal_zone_get_slope(priv->thermal);
-	int offset = thermal_zone_get_offset(priv->thermal);
+	struct bcm2711_thermal_priv *priv = tz->devdata;
+	int slope = thermal_zone_get_slope(tz);
+	int offset = thermal_zone_get_offset(tz);
 	u32 val;
 	int ret;
 
@@ -54,7 +54,7 @@ static int bcm2711_get_temp(void *data, int *temp)
 	return 0;
 }
 
-static const struct thermal_zone_of_device_ops bcm2711_thermal_of_ops = {
+static const struct thermal_zone_device_ops bcm2711_thermal_of_ops = {
 	.get_temp	= bcm2711_get_temp,
 };
 
@@ -88,8 +88,8 @@ static int bcm2711_thermal_probe(struct platform_device *pdev)
 	}
 	priv->regmap = regmap;
 
-	thermal = devm_thermal_zone_of_sensor_register(dev, 0, priv,
-						       &bcm2711_thermal_of_ops);
+	thermal = devm_thermal_of_zone_register(dev, 0, priv,
+						&bcm2711_thermal_of_ops);
 	if (IS_ERR(thermal)) {
 		ret = PTR_ERR(thermal);
 		dev_err(dev, "could not register sensor: %d\n", ret);
diff --git a/drivers/thermal/broadcom/bcm2835_thermal.c b/drivers/thermal/broadcom/bcm2835_thermal.c
index c8e4344d5a3d..2c67841a1115 100644
--- a/drivers/thermal/broadcom/bcm2835_thermal.c
+++ b/drivers/thermal/broadcom/bcm2835_thermal.c
@@ -88,9 +88,9 @@ static int bcm2835_thermal_temp2adc(int temp, int offset, int slope)
 	return temp;
 }
 
-static int bcm2835_thermal_get_temp(void *d, int *temp)
+static int bcm2835_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
 {
-	struct bcm2835_thermal_data *data = d;
+	struct bcm2835_thermal_data *data = tz->devdata;
 	u32 val = readl(data->regs + BCM2835_TS_TSENSSTAT);
 
 	if (!(val & BCM2835_TS_TSENSSTAT_VALID))
@@ -135,7 +135,7 @@ static void bcm2835_thermal_debugfs(struct platform_device *pdev)
 	debugfs_create_regset32("regset", 0444, data->debugfsdir, regset);
 }
 
-static const struct thermal_zone_of_device_ops bcm2835_thermal_ops = {
+static const struct thermal_zone_device_ops bcm2835_thermal_ops = {
 	.get_temp = bcm2835_thermal_get_temp,
 };
 
@@ -206,8 +206,8 @@ static int bcm2835_thermal_probe(struct platform_device *pdev)
 			 data->clk, rate);
 
 	/* register of thermal sensor and get info from DT */
-	tz = thermal_zone_of_sensor_register(&pdev->dev, 0, data,
-					     &bcm2835_thermal_ops);
+	tz = devm_thermal_of_zone_register(&pdev->dev, 0, data,
+					   &bcm2835_thermal_ops);
 	if (IS_ERR(tz)) {
 		err = PTR_ERR(tz);
 		dev_err(&pdev->dev,
@@ -277,7 +277,7 @@ static int bcm2835_thermal_probe(struct platform_device *pdev)
 
 	return 0;
 err_tz:
-	thermal_zone_of_sensor_unregister(&pdev->dev, tz);
+	thermal_of_zone_unregister(tz);
 err_clk:
 	clk_disable_unprepare(data->clk);
 
@@ -290,7 +290,7 @@ static int bcm2835_thermal_remove(struct platform_device *pdev)
 	struct thermal_zone_device *tz = data->tz;
 
 	debugfs_remove_recursive(data->debugfsdir);
-	thermal_zone_of_sensor_unregister(&pdev->dev, tz);
+	thermal_of_zone_unregister(tz);
 	clk_disable_unprepare(data->clk);
 
 	return 0;
diff --git a/drivers/thermal/broadcom/brcmstb_thermal.c b/drivers/thermal/broadcom/brcmstb_thermal.c
index 0cedb8b4f00a..c79c6cfdd74d 100644
--- a/drivers/thermal/broadcom/brcmstb_thermal.c
+++ b/drivers/thermal/broadcom/brcmstb_thermal.c
@@ -105,7 +105,7 @@ static struct avs_tmon_trip avs_tmon_trips[] = {
 struct brcmstb_thermal_params {
 	unsigned int offset;
 	unsigned int mult;
-	const struct thermal_zone_of_device_ops *of_ops;
+	const struct thermal_zone_device_ops *of_ops;
 };
 
 struct brcmstb_thermal_priv {
@@ -150,9 +150,9 @@ static inline u32 avs_tmon_temp_to_code(struct brcmstb_thermal_priv *priv,
 		return (u32)((offset - temp) / mult);
 }
 
-static int brcmstb_get_temp(void *data, int *temp)
+static int brcmstb_get_temp(struct thermal_zone_device *tz, int *temp)
 {
-	struct brcmstb_thermal_priv *priv = data;
+	struct brcmstb_thermal_priv *priv = tz->devdata;
 	u32 val;
 	long t;
 
@@ -260,9 +260,9 @@ static irqreturn_t brcmstb_tmon_irq_thread(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static int brcmstb_set_trips(void *data, int low, int high)
+static int brcmstb_set_trips(struct thermal_zone_device *tz, int low, int high)
 {
-	struct brcmstb_thermal_priv *priv = data;
+	struct brcmstb_thermal_priv *priv = tz->devdata;
 
 	dev_dbg(priv->dev, "set trips %d <--> %d\n", low, high);
 
@@ -288,7 +288,7 @@ static int brcmstb_set_trips(void *data, int low, int high)
 	return 0;
 }
 
-static const struct thermal_zone_of_device_ops brcmstb_16nm_of_ops = {
+static const struct thermal_zone_device_ops brcmstb_16nm_of_ops = {
 	.get_temp	= brcmstb_get_temp,
 };
 
@@ -298,7 +298,7 @@ static const struct brcmstb_thermal_params brcmstb_16nm_params = {
 	.of_ops	= &brcmstb_16nm_of_ops,
 };
 
-static const struct thermal_zone_of_device_ops brcmstb_28nm_of_ops = {
+static const struct thermal_zone_device_ops brcmstb_28nm_of_ops = {
 	.get_temp	= brcmstb_get_temp,
 	.set_trips	= brcmstb_set_trips,
 };
@@ -318,7 +318,7 @@ MODULE_DEVICE_TABLE(of, brcmstb_thermal_id_table);
 
 static int brcmstb_thermal_probe(struct platform_device *pdev)
 {
-	const struct thermal_zone_of_device_ops *of_ops;
+	const struct thermal_zone_device_ops *of_ops;
 	struct thermal_zone_device *thermal;
 	struct brcmstb_thermal_priv *priv;
 	struct resource *res;
@@ -341,8 +341,8 @@ static int brcmstb_thermal_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, priv);
 	of_ops = priv->temp_params->of_ops;
 
-	thermal = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, priv,
-						       of_ops);
+	thermal = devm_thermal_of_zone_register(&pdev->dev, 0, priv,
+						of_ops);
 	if (IS_ERR(thermal)) {
 		ret = PTR_ERR(thermal);
 		dev_err(&pdev->dev, "could not register sensor: %d\n", ret);
diff --git a/drivers/thermal/broadcom/ns-thermal.c b/drivers/thermal/broadcom/ns-thermal.c
index c9468ba9d449..07a8a3f49bd0 100644
--- a/drivers/thermal/broadcom/ns-thermal.c
+++ b/drivers/thermal/broadcom/ns-thermal.c
@@ -14,19 +14,14 @@
 #define PVTMON_CONTROL0_SEL_TEST_MODE			0x0000000e
 #define PVTMON_STATUS					0x08
 
-struct ns_thermal {
-	struct thermal_zone_device *tz;
-	void __iomem *pvtmon;
-};
-
-static int ns_thermal_get_temp(void *data, int *temp)
+static int ns_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
 {
-	struct ns_thermal *ns_thermal = data;
-	int offset = thermal_zone_get_offset(ns_thermal->tz);
-	int slope = thermal_zone_get_slope(ns_thermal->tz);
+	void __iomem *pvtmon = tz->devdata;
+	int offset = thermal_zone_get_offset(tz);
+	int slope = thermal_zone_get_slope(tz);
 	u32 val;
 
-	val = readl(ns_thermal->pvtmon + PVTMON_CONTROL0);
+	val = readl(pvtmon + PVTMON_CONTROL0);
 	if ((val & PVTMON_CONTROL0_SEL_MASK) != PVTMON_CONTROL0_SEL_TEMP_MONITOR) {
 		/* Clear current mode selection */
 		val &= ~PVTMON_CONTROL0_SEL_MASK;
@@ -34,50 +29,47 @@ static int ns_thermal_get_temp(void *data, int *temp)
 		/* Set temp monitor mode (it's the default actually) */
 		val |= PVTMON_CONTROL0_SEL_TEMP_MONITOR;
 
-		writel(val, ns_thermal->pvtmon + PVTMON_CONTROL0);
+		writel(val, pvtmon + PVTMON_CONTROL0);
 	}
 
-	val = readl(ns_thermal->pvtmon + PVTMON_STATUS);
+	val = readl(pvtmon + PVTMON_STATUS);
 	*temp = slope * val + offset;
 
 	return 0;
 }
 
-static const struct thermal_zone_of_device_ops ns_thermal_ops = {
+static const struct thermal_zone_device_ops ns_thermal_ops = {
 	.get_temp = ns_thermal_get_temp,
 };
 
 static int ns_thermal_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct ns_thermal *ns_thermal;
-
-	ns_thermal = devm_kzalloc(dev, sizeof(*ns_thermal), GFP_KERNEL);
-	if (!ns_thermal)
-		return -ENOMEM;
+	struct thermal_zone_device *tz;
+	void __iomem *pvtmon;
 
-	ns_thermal->pvtmon = of_iomap(dev_of_node(dev), 0);
-	if (WARN_ON(!ns_thermal->pvtmon))
+	pvtmon = of_iomap(dev_of_node(dev), 0);
+	if (WARN_ON(!pvtmon))
 		return -ENOENT;
 
-	ns_thermal->tz = devm_thermal_zone_of_sensor_register(dev, 0,
-							      ns_thermal,
-							      &ns_thermal_ops);
-	if (IS_ERR(ns_thermal->tz)) {
-		iounmap(ns_thermal->pvtmon);
-		return PTR_ERR(ns_thermal->tz);
+	tz = devm_thermal_of_zone_register(dev, 0,
+					   pvtmon,
+					   &ns_thermal_ops);
+	if (IS_ERR(tz)) {
+		iounmap(pvtmon);
+		return PTR_ERR(tz);
 	}
 
-	platform_set_drvdata(pdev, ns_thermal);
+	platform_set_drvdata(pdev, pvtmon);
 
 	return 0;
 }
 
 static int ns_thermal_remove(struct platform_device *pdev)
 {
-	struct ns_thermal *ns_thermal = platform_get_drvdata(pdev);
+	void __iomem *pvtmon = platform_get_drvdata(pdev);
 
-	iounmap(ns_thermal->pvtmon);
+	iounmap(pvtmon);
 
 	return 0;
 }
diff --git a/drivers/thermal/broadcom/sr-thermal.c b/drivers/thermal/broadcom/sr-thermal.c
index 85ab9edd580c..2b93502543ff 100644
--- a/drivers/thermal/broadcom/sr-thermal.c
+++ b/drivers/thermal/broadcom/sr-thermal.c
@@ -19,7 +19,6 @@
 #define SR_TMON_MAX_LIST        6
 
 struct sr_tmon {
-	struct thermal_zone_device *tz;
 	unsigned int crit_temp;
 	unsigned int tmon_id;
 	struct sr_thermal *priv;
@@ -31,9 +30,9 @@ struct sr_thermal {
 	struct sr_tmon tmon[SR_TMON_MAX_LIST];
 };
 
-static int sr_get_temp(void *data, int *temp)
+static int sr_get_temp(struct thermal_zone_device *tz, int *temp)
 {
-	struct sr_tmon *tmon = data;
+	struct sr_tmon *tmon = tz->devdata;
 	struct sr_thermal *sr_thermal = tmon->priv;
 
 	*temp = readl(sr_thermal->regs + SR_TMON_TEMP_BASE(tmon->tmon_id));
@@ -41,13 +40,14 @@ static int sr_get_temp(void *data, int *temp)
 	return 0;
 }
 
-static const struct thermal_zone_of_device_ops sr_tz_ops = {
+static const struct thermal_zone_device_ops sr_tz_ops = {
 	.get_temp = sr_get_temp,
 };
 
 static int sr_thermal_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
+	struct thermal_zone_device *tz;
 	struct sr_thermal *sr_thermal;
 	struct sr_tmon *tmon;
 	struct resource *res;
@@ -84,10 +84,10 @@ static int sr_thermal_probe(struct platform_device *pdev)
 		writel(0, sr_thermal->regs + SR_TMON_TEMP_BASE(i));
 		tmon->tmon_id = i;
 		tmon->priv = sr_thermal;
-		tmon->tz = devm_thermal_zone_of_sensor_register(dev, i, tmon,
-								&sr_tz_ops);
-		if (IS_ERR(tmon->tz))
-			return PTR_ERR(tmon->tz);
+		tz = devm_thermal_of_zone_register(dev, i, tmon,
+						   &sr_tz_ops);
+		if (IS_ERR(tz))
+			return PTR_ERR(tz);
 
 		dev_dbg(dev, "thermal sensor %d registered\n", i);
 	}
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 12/33] thermal/drivers/st: Switch to new of API

[Daniel Lezcano]

The thermal OF code has a new API allowing to migrate the OF
initialization to a simpler approach. The ops are no longer device
tree specific and are the generic ones provided by the core code.

Convert the ops to the thermal_zone_device_ops format and use the new
API to register the thermal zone with these generic ops.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org>
---
 drivers/thermal/st/stm_thermal.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/thermal/st/stm_thermal.c b/drivers/thermal/st/stm_thermal.c
index 5fd3fb8912a6..78feb802a87d 100644
--- a/drivers/thermal/st/stm_thermal.c
+++ b/drivers/thermal/st/stm_thermal.c
@@ -302,9 +302,9 @@ static int stm_disable_irq(struct stm_thermal_sensor *sensor)
 	return 0;
 }
 
-static int stm_thermal_set_trips(void *data, int low, int high)
+static int stm_thermal_set_trips(struct thermal_zone_device *tz, int low, int high)
 {
-	struct stm_thermal_sensor *sensor = data;
+	struct stm_thermal_sensor *sensor = tz->devdata;
 	u32 itr1, th;
 	int ret;
 
@@ -350,9 +350,9 @@ static int stm_thermal_set_trips(void *data, int low, int high)
 }
 
 /* Callback to get temperature from HW */
-static int stm_thermal_get_temp(void *data, int *temp)
+static int stm_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
 {
-	struct stm_thermal_sensor *sensor = data;
+	struct stm_thermal_sensor *sensor = tz->devdata;
 	u32 periods;
 	int freqM, ret;
 
@@ -474,7 +474,7 @@ static int stm_thermal_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(stm_thermal_pm_ops,
 			 stm_thermal_suspend, stm_thermal_resume);
 
-static const struct thermal_zone_of_device_ops stm_tz_ops = {
+static const struct thermal_zone_device_ops stm_tz_ops = {
 	.get_temp	= stm_thermal_get_temp,
 	.set_trips	= stm_thermal_set_trips,
 };
@@ -539,9 +539,9 @@ static int stm_thermal_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	sensor->th_dev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0,
-							      sensor,
-							      &stm_tz_ops);
+	sensor->th_dev = devm_thermal_of_zone_register(&pdev->dev, 0,
+						       sensor,
+						       &stm_tz_ops);
 
 	if (IS_ERR(sensor->th_dev)) {
 		dev_err(&pdev->dev, "%s: thermal zone sensor registering KO\n",
@@ -572,7 +572,6 @@ static int stm_thermal_probe(struct platform_device *pdev)
 	return 0;
 
 err_tz:
-	thermal_zone_of_sensor_unregister(&pdev->dev, sensor->th_dev);
 	return ret;
 }
 
@@ -582,7 +581,6 @@ static int stm_thermal_remove(struct platform_device *pdev)
 
 	stm_thermal_sensor_off(sensor);
 	thermal_remove_hwmon_sysfs(sensor->th_dev);
-	thermal_zone_of_sensor_unregister(&pdev->dev, sensor->th_dev);
 
 	return 0;
 }
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 16/33] thermal/drivers/imx: Switch to new of API

[Daniel Lezcano]

The thermal OF code has a new API allowing to migrate the OF
initialization to a simpler approach. The ops are no longer device
tree specific and are the generic ones provided by the core code.

Convert the ops to the thermal_zone_device_ops format and use the new
API to register the thermal zone with these generic ops.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org>
---
 drivers/thermal/imx8mm_thermal.c | 14 +++++++-------
 drivers/thermal/imx_sc_thermal.c | 14 +++++++-------
 2 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/thermal/imx8mm_thermal.c b/drivers/thermal/imx8mm_thermal.c
index af666bd9e8d4..e2c2673025a7 100644
--- a/drivers/thermal/imx8mm_thermal.c
+++ b/drivers/thermal/imx8mm_thermal.c
@@ -96,15 +96,15 @@ static int imx8mp_tmu_get_temp(void *data, int *temp)
 	return 0;
 }
 
-static int tmu_get_temp(void *data, int *temp)
+static int tmu_get_temp(struct thermal_zone_device *tz, int *temp)
 {
-	struct tmu_sensor *sensor = data;
+	struct tmu_sensor *sensor = tz->devdata;
 	struct imx8mm_tmu *tmu = sensor->priv;
 
-	return tmu->socdata->get_temp(data, temp);
+	return tmu->socdata->get_temp(sensor, temp);
 }
 
-static struct thermal_zone_of_device_ops tmu_tz_ops = {
+static const struct thermal_zone_device_ops tmu_tz_ops = {
 	.get_temp = tmu_get_temp,
 };
 
@@ -165,9 +165,9 @@ static int imx8mm_tmu_probe(struct platform_device *pdev)
 	for (i = 0; i < data->num_sensors; i++) {
 		tmu->sensors[i].priv = tmu;
 		tmu->sensors[i].tzd =
-			devm_thermal_zone_of_sensor_register(&pdev->dev, i,
-							     &tmu->sensors[i],
-							     &tmu_tz_ops);
+			devm_thermal_of_zone_register(&pdev->dev, i,
+						      &tmu->sensors[i],
+						      &tmu_tz_ops);
 		if (IS_ERR(tmu->sensors[i].tzd)) {
 			ret = PTR_ERR(tmu->sensors[i].tzd);
 			dev_err(&pdev->dev,
diff --git a/drivers/thermal/imx_sc_thermal.c b/drivers/thermal/imx_sc_thermal.c
index 331a241eb0ef..10bfa6507eb4 100644
--- a/drivers/thermal/imx_sc_thermal.c
+++ b/drivers/thermal/imx_sc_thermal.c
@@ -43,11 +43,11 @@ struct imx_sc_msg_misc_get_temp {
 	} data;
 } __packed __aligned(4);
 
-static int imx_sc_thermal_get_temp(void *data, int *temp)
+static int imx_sc_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
 {
 	struct imx_sc_msg_misc_get_temp msg;
 	struct imx_sc_rpc_msg *hdr = &msg.hdr;
-	struct imx_sc_sensor *sensor = data;
+	struct imx_sc_sensor *sensor = tz->devdata;
 	int ret;
 
 	msg.data.req.resource_id = sensor->resource_id;
@@ -70,7 +70,7 @@ static int imx_sc_thermal_get_temp(void *data, int *temp)
 	return 0;
 }
 
-static const struct thermal_zone_of_device_ops imx_sc_thermal_ops = {
+static const struct thermal_zone_device_ops imx_sc_thermal_ops = {
 	.get_temp = imx_sc_thermal_get_temp,
 };
 
@@ -109,10 +109,10 @@ static int imx_sc_thermal_probe(struct platform_device *pdev)
 			break;
 		}
 
-		sensor->tzd = devm_thermal_zone_of_sensor_register(&pdev->dev,
-								   sensor->resource_id,
-								   sensor,
-								   &imx_sc_thermal_ops);
+		sensor->tzd = devm_thermal_of_zone_register(&pdev->dev,
+							    sensor->resource_id,
+							    sensor,
+							    &imx_sc_thermal_ops);
 		if (IS_ERR(sensor->tzd)) {
 			dev_err(&pdev->dev, "failed to register thermal zone\n");
 			ret = PTR_ERR(sensor->tzd);
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 20/33] thermal/drivers/mtk: Switch to new of API

[Daniel Lezcano]

The thermal OF code has a new API allowing to migrate the OF
initialization to a simpler approach. The ops are no longer device
tree specific and are the generic ones provided by the core code.

Convert the ops to the thermal_zone_device_ops format and use the new
API to register the thermal zone with these generic ops.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/thermal/mtk_thermal.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
index ede94eadddda..8440692e3890 100644
--- a/drivers/thermal/mtk_thermal.c
+++ b/drivers/thermal/mtk_thermal.c
@@ -679,9 +679,9 @@ static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
 	return max;
 }
 
-static int mtk_read_temp(void *data, int *temperature)
+static int mtk_read_temp(struct thermal_zone_device *tz, int *temperature)
 {
-	struct mtk_thermal *mt = data;
+	struct mtk_thermal *mt = tz->devdata;
 	int i;
 	int tempmax = INT_MIN;
 
@@ -700,7 +700,7 @@ static int mtk_read_temp(void *data, int *temperature)
 	return 0;
 }
 
-static const struct thermal_zone_of_device_ops mtk_thermal_ops = {
+static const struct thermal_zone_device_ops mtk_thermal_ops = {
 	.get_temp = mtk_read_temp,
 };
 
@@ -1082,8 +1082,8 @@ static int mtk_thermal_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, mt);
 
-	tzdev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, mt,
-						     &mtk_thermal_ops);
+	tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt,
+					      &mtk_thermal_ops);
 	if (IS_ERR(tzdev)) {
 		ret = PTR_ERR(tzdev);
 		goto err_disable_clk_peri_therm;
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 25/33] ata/drivers/ahci_imx: Switch to new of thermal API

[Daniel Lezcano]

The thermal OF code has a new API allowing to migrate the OF
initialization to a simpler approach. The ops are no longer device
tree specific and are the generic ones provided by the core code.

Convert the ops to the thermal_zone_device_ops format and use the new
API to register the thermal zone with these generic ops.

sata_ahci_read_temperature() is used by sata_ahci_show_temp() also.

So in order to change the function prototype for the get_temp ops which
does not take a void* but a thermal_zone_device* structure, this
function wraps the call.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
---
 drivers/ata/ahci_imx.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c
index 79aa9f285312..b734e069034d 100644
--- a/drivers/ata/ahci_imx.c
+++ b/drivers/ata/ahci_imx.c
@@ -327,7 +327,7 @@ static int read_adc_sum(void *dev, u16 rtune_ctl_reg, void __iomem * mmio)
 }
 
 /* SATA AHCI temperature monitor */
-static int sata_ahci_read_temperature(void *dev, int *temp)
+static int __sata_ahci_read_temperature(void *dev, int *temp)
 {
 	u16 mpll_test_reg, rtune_ctl_reg, dac_ctl_reg, read_sum;
 	u32 str1, str2, str3, str4;
@@ -416,6 +416,11 @@ static int sata_ahci_read_temperature(void *dev, int *temp)
 	return 0;
 }
 
+static int sata_ahci_read_temperature(struct thermal_zone_device *tz, int *temp)
+{
+	return __sata_ahci_read_temperature(tz->devdata, temp);
+}
+
 static ssize_t sata_ahci_show_temp(struct device *dev,
 				   struct device_attribute *da,
 				   char *buf)
@@ -423,14 +428,14 @@ static ssize_t sata_ahci_show_temp(struct device *dev,
 	unsigned int temp = 0;
 	int err;
 
-	err = sata_ahci_read_temperature(dev, &temp);
+	err = __sata_ahci_read_temperature(dev, &temp);
 	if (err < 0)
 		return err;
 
 	return sprintf(buf, "%u\n", temp);
 }
 
-static const struct thermal_zone_of_device_ops fsl_sata_ahci_of_thermal_ops = {
+static const struct thermal_zone_device_ops fsl_sata_ahci_of_thermal_ops = {
 	.get_temp = sata_ahci_read_temperature,
 };
 
@@ -1131,8 +1136,8 @@ static int imx_ahci_probe(struct platform_device *pdev)
 			ret = PTR_ERR(hwmon_dev);
 			goto disable_clk;
 		}
-		devm_thermal_zone_of_sensor_register(hwmon_dev, 0, hwmon_dev,
-					     &fsl_sata_ahci_of_thermal_ops);
+		devm_thermal_of_zone_register(hwmon_dev, 0, hwmon_dev,
+					      &fsl_sata_ahci_of_thermal_ops);
 		dev_info(dev, "%s: sensor 'sata_ahci'\n", dev_name(hwmon_dev));
 	}
 
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 28/33] iio/drivers/sun4i_gpadc: Switch to new of thermal API

[Daniel Lezcano]

The thermal OF code has a new API allowing to migrate the OF
initialization to a simpler approach. The ops are no longer device
tree specific and are the generic ones provided by the core code.

Convert the ops to the thermal_zone_device_ops format and use the new
API to register the thermal zone with these generic ops.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/adc/sun4i-gpadc-iio.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
index 2d393a4dfff6..a6ade70dedf8 100644
--- a/drivers/iio/adc/sun4i-gpadc-iio.c
+++ b/drivers/iio/adc/sun4i-gpadc-iio.c
@@ -412,9 +412,9 @@ static int sun4i_gpadc_runtime_resume(struct device *dev)
 	return 0;
 }
 
-static int sun4i_gpadc_get_temp(void *data, int *temp)
+static int sun4i_gpadc_get_temp(struct thermal_zone_device *tz, int *temp)
 {
-	struct sun4i_gpadc_iio *info = data;
+	struct sun4i_gpadc_iio *info = tz->devdata;
 	int val, scale, offset;
 
 	if (sun4i_gpadc_temp_read(info->indio_dev, &val))
@@ -428,7 +428,7 @@ static int sun4i_gpadc_get_temp(void *data, int *temp)
 	return 0;
 }
 
-static const struct thermal_zone_of_device_ops sun4i_ts_tz_ops = {
+static const struct thermal_zone_device_ops sun4i_ts_tz_ops = {
 	.get_temp = &sun4i_gpadc_get_temp,
 };
 
@@ -637,9 +637,9 @@ static int sun4i_gpadc_probe(struct platform_device *pdev)
 	pm_runtime_enable(&pdev->dev);
 
 	if (IS_ENABLED(CONFIG_THERMAL_OF)) {
-		info->tzd = thermal_zone_of_sensor_register(info->sensor_device,
-							    0, info,
-							    &sun4i_ts_tz_ops);
+		info->tzd = devm_thermal_of_zone_register(info->sensor_device,
+							  0, info,
+							  &sun4i_ts_tz_ops);
 		/*
 		 * Do not fail driver probing when failing to register in
 		 * thermal because no thermal DT node is found.
@@ -681,8 +681,6 @@ static int sun4i_gpadc_remove(struct platform_device *pdev)
 	if (!IS_ENABLED(CONFIG_THERMAL_OF))
 		return 0;
 
-	thermal_zone_of_sensor_unregister(info->sensor_device, info->tzd);
-
 	if (!info->no_irq)
 		iio_map_array_unregister(indio_dev);
 
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 28/33] iio/drivers/sun4i_gpadc: Switch to new of thermal API

[Jernej Škrabec]

Dne petek, 05. avgust 2022 ob 00:43:44 CEST je Daniel Lezcano napisal(a):
> The thermal OF code has a new API allowing to migrate the OF
> initialization to a simpler approach. The ops are no longer device
> tree specific and are the generic ones provided by the core code.
> 
> Convert the ops to the thermal_zone_device_ops format and use the new
> API to register the thermal zone with these generic ops.
> 
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org>
> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>

Best regards,
Jernej



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 29/33] Input: sun4i-ts - switch to new of thermal API

[Daniel Lezcano]

The thermal OF code has a new API allowing to migrate the OF
initialization to a simpler approach. The ops are no longer device
tree specific and are the generic ones provided by the core code.

Convert the ops to the thermal_zone_device_ops format and use the new
API to register the thermal zone with these generic ops.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/touchscreen/sun4i-ts.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/input/touchscreen/sun4i-ts.c b/drivers/input/touchscreen/sun4i-ts.c
index 742a7e96c1b5..73eb8f80be6e 100644
--- a/drivers/input/touchscreen/sun4i-ts.c
+++ b/drivers/input/touchscreen/sun4i-ts.c
@@ -192,12 +192,12 @@ static int sun4i_get_temp(const struct sun4i_ts_data *ts, int *temp)
 	return 0;
 }
 
-static int sun4i_get_tz_temp(void *data, int *temp)
+static int sun4i_get_tz_temp(struct thermal_zone_device *tz, int *temp)
 {
-	return sun4i_get_temp(data, temp);
+	return sun4i_get_temp(tz->devdata, temp);
 }
 
-static const struct thermal_zone_of_device_ops sun4i_ts_tz_ops = {
+static const struct thermal_zone_device_ops sun4i_ts_tz_ops = {
 	.get_temp = sun4i_get_tz_temp,
 };
 
@@ -356,8 +356,8 @@ static int sun4i_ts_probe(struct platform_device *pdev)
 	if (IS_ERR(hwmon))
 		return PTR_ERR(hwmon);
 
-	thermal = devm_thermal_zone_of_sensor_register(ts->dev, 0, ts,
-						       &sun4i_ts_tz_ops);
+	thermal = devm_thermal_of_zone_register(ts->dev, 0, ts,
+						&sun4i_ts_tz_ops);
 	if (IS_ERR(thermal))
 		return PTR_ERR(thermal);
 
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 29/33] Input: sun4i-ts - switch to new of thermal API

[Jernej Škrabec]

Dne petek, 05. avgust 2022 ob 00:43:45 CEST je Daniel Lezcano napisal(a):
> The thermal OF code has a new API allowing to migrate the OF
> initialization to a simpler approach. The ops are no longer device
> tree specific and are the generic ones provided by the core code.
> 
> Convert the ops to the thermal_zone_device_ops format and use the new
> API to register the thermal zone with these generic ops.
> 
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org>
> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>

Best regards,
Jernej



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 31/33] thermal/drivers/samsung: Switch to new of thermal API

[Daniel Lezcano]

The thermal OF code has a new API allowing to migrate the OF
initialization to a simpler approach. The ops are no longer device
tree specific and are the generic ones provided by the core code.

Convert the ops to the thermal_zone_device_ops format and use the new
API to register the thermal zone with these generic ops.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 drivers/thermal/samsung/exynos_tmu.c | 24 ++++++++++--------------
 1 file changed, 10 insertions(+), 14 deletions(-)

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index f4ab4c5b4b62..51874d0a284c 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -650,9 +650,9 @@ static void exynos7_tmu_control(struct platform_device *pdev, bool on)
 	writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
 }
 
-static int exynos_get_temp(void *p, int *temp)
+static int exynos_get_temp(struct thermal_zone_device *tz, int *temp)
 {
-	struct exynos_tmu_data *data = p;
+	struct exynos_tmu_data *data = tz->devdata;
 	int value, ret = 0;
 
 	if (!data || !data->tmu_read)
@@ -728,9 +728,9 @@ static void exynos4412_tmu_set_emulation(struct exynos_tmu_data *data,
 	writel(val, data->base + emul_con);
 }
 
-static int exynos_tmu_set_emulation(void *drv_data, int temp)
+static int exynos_tmu_set_emulation(struct thermal_zone_device *tz, int temp)
 {
-	struct exynos_tmu_data *data = drv_data;
+	struct exynos_tmu_data *data = tz->devdata;
 	int ret = -EINVAL;
 
 	if (data->soc == SOC_ARCH_EXYNOS4210)
@@ -750,7 +750,7 @@ static int exynos_tmu_set_emulation(void *drv_data, int temp)
 }
 #else
 #define exynos4412_tmu_set_emulation NULL
-static int exynos_tmu_set_emulation(void *drv_data, int temp)
+static int exynos_tmu_set_emulation(struct thermal_zone_device *tz, int temp)
 	{ return -EINVAL; }
 #endif /* CONFIG_THERMAL_EMULATION */
 
@@ -997,7 +997,7 @@ static int exynos_map_dt_data(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct thermal_zone_of_device_ops exynos_sensor_ops = {
+static const struct thermal_zone_device_ops exynos_sensor_ops = {
 	.get_temp = exynos_get_temp,
 	.set_emul_temp = exynos_tmu_set_emulation,
 };
@@ -1091,8 +1091,8 @@ static int exynos_tmu_probe(struct platform_device *pdev)
 	 * data->tzd must be registered before calling exynos_tmu_initialize(),
 	 * requesting irq and calling exynos_tmu_control().
 	 */
-	data->tzd = thermal_zone_of_sensor_register(&pdev->dev, 0, data,
-						    &exynos_sensor_ops);
+	data->tzd = devm_thermal_of_zone_register(&pdev->dev, 0, data,
+						  &exynos_sensor_ops);
 	if (IS_ERR(data->tzd)) {
 		ret = PTR_ERR(data->tzd);
 		if (ret != -EPROBE_DEFER)
@@ -1104,21 +1104,19 @@ static int exynos_tmu_probe(struct platform_device *pdev)
 	ret = exynos_tmu_initialize(pdev);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to initialize TMU\n");
-		goto err_thermal;
+		goto err_sclk;
 	}
 
 	ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq,
 		IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq);
-		goto err_thermal;
+		goto err_sclk;
 	}
 
 	exynos_tmu_control(pdev, true);
 	return 0;
 
-err_thermal:
-	thermal_zone_of_sensor_unregister(&pdev->dev, data->tzd);
 err_sclk:
 	clk_disable_unprepare(data->sclk);
 err_clk:
@@ -1136,9 +1134,7 @@ static int exynos_tmu_probe(struct platform_device *pdev)
 static int exynos_tmu_remove(struct platform_device *pdev)
 {
 	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
-	struct thermal_zone_device *tzd = data->tzd;
 
-	thermal_zone_of_sensor_unregister(&pdev->dev, tzd);
 	exynos_tmu_control(pdev, false);
 
 	clk_disable_unprepare(data->sclk);
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel