From: Sudeep Holla <sudeep.holla@arm.com>
To: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, op-tee@lists.trustedfirmware.org
Cc: Sudeep Holla <sudeep.holla@arm.com>,
Marc Bonnici <marc.bonnici@arm.com>,
Achin Gupta <achin.gupta@arm.com>,
Jens Wiklander <jens.wiklander@linaro.org>,
Valentin Laurent <valentin.laurent@trustonic.com>,
Lukas Hanel <lukas.hanel@trustonic.com>,
Coboy Chen <coboy.chen@mediatek.com>
Subject: [PATCH v3 05/10] firmware: arm_ffa: Use FFA_FEATURES to detect if native versions are supported
Date: Wed, 7 Sep 2022 15:52:35 +0100 [thread overview]
Message-ID: <20220907145240.1683088-6-sudeep.holla@arm.com> (raw)
In-Reply-To: <20220907145240.1683088-1-sudeep.holla@arm.com>
Currently, the ffa_dev->mode_32bit is use to detect if the native 64-bit
or 32-bit versions of FF-A ABI needs to be used. However for the FF-A
memory ABIs, it is not dependent on the ffa_device(i.e. the partition)
itself, but the partition manager(SPM).
So, the FFA_FEATURES can be use to detect if the native 64bit ABIs are
supported or not and appropriate calls can be made based on that.
Use FFA_FEATURES to detect if native versions of MEM_LEND or MEM_SHARE
are implemented and make of the same to use native memory ABIs later on.
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
drivers/firmware/arm_ffa/driver.c | 22 ++++++++++++++++------
1 file changed, 16 insertions(+), 6 deletions(-)
diff --git a/drivers/firmware/arm_ffa/driver.c b/drivers/firmware/arm_ffa/driver.c
index 81b8d578b6ea..37a8ee304508 100644
--- a/drivers/firmware/arm_ffa/driver.c
+++ b/drivers/firmware/arm_ffa/driver.c
@@ -163,6 +163,7 @@ struct ffa_drv_info {
struct mutex tx_lock; /* lock to protect Tx buffer */
void *rx_buffer;
void *tx_buffer;
+ bool mem_ops_native;
};
static struct ffa_drv_info *drv_info;
@@ -597,6 +598,13 @@ static int ffa_features(u32 func_feat_id, u32 input_props,
return 0;
}
+static void ffa_set_up_mem_ops_native_flag(void)
+{
+ if (!ffa_features(FFA_FN_NATIVE(MEM_LEND), 0, NULL, NULL) ||
+ !ffa_features(FFA_FN_NATIVE(MEM_SHARE), 0, NULL, NULL))
+ drv_info->mem_ops_native = true;
+}
+
static u32 ffa_api_version_get(void)
{
return drv_info->version;
@@ -638,10 +646,10 @@ static int ffa_sync_send_receive(struct ffa_device *dev,
static int
ffa_memory_share(struct ffa_device *dev, struct ffa_mem_ops_args *args)
{
- if (dev->mode_32bit)
- return ffa_memory_ops(FFA_MEM_SHARE, args);
+ if (drv_info->mem_ops_native)
+ return ffa_memory_ops(FFA_FN_NATIVE(MEM_SHARE), args);
- return ffa_memory_ops(FFA_FN_NATIVE(MEM_SHARE), args);
+ return ffa_memory_ops(FFA_MEM_SHARE, args);
}
static int
@@ -654,10 +662,10 @@ ffa_memory_lend(struct ffa_device *dev, struct ffa_mem_ops_args *args)
* however on systems without a hypervisor the responsibility
* falls to the calling kernel driver to prevent access.
*/
- if (dev->mode_32bit)
- return ffa_memory_ops(FFA_MEM_LEND, args);
+ if (drv_info->mem_ops_native)
+ return ffa_memory_ops(FFA_FN_NATIVE(MEM_LEND), args);
- return ffa_memory_ops(FFA_FN_NATIVE(MEM_LEND), args);
+ return ffa_memory_ops(FFA_MEM_LEND, args);
}
static const struct ffa_dev_ops ffa_ops = {
@@ -768,6 +776,8 @@ static int __init ffa_init(void)
ffa_setup_partitions();
+ ffa_set_up_mem_ops_native_flag();
+
return 0;
free_pages:
if (drv_info->tx_buffer)
--
2.37.3
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-09-07 14:55 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-07 14:52 [PATCH v3 00/10] firmware: arm_ffa: Refactoring and initial/minor v1.1 update Sudeep Holla
2022-09-07 14:52 ` [PATCH v3 01/10] firmware: arm_ffa: Add pointer to the ffa_dev_ops in struct ffa_dev Sudeep Holla
2022-09-07 14:52 ` [PATCH v3 02/10] tee: optee: Drop ffa_ops in optee_ffa structure using ffa_dev->ops directly Sudeep Holla
2022-09-07 14:52 ` [PATCH v3 03/10] firmware: arm_ffa: Remove ffa_dev_ops_get() Sudeep Holla
2022-09-07 14:52 ` [PATCH v3 04/10] firmware: arm_ffa: Add support for querying FF-A features Sudeep Holla
2022-09-07 14:52 ` Sudeep Holla [this message]
2022-09-07 14:52 ` [PATCH v3 06/10] firmware: arm_ffa: Make memory apis ffa_device independent Sudeep Holla
2022-09-07 14:52 ` [PATCH v3 07/10] firmware: arm_ffa: Rename ffa_dev_ops as ffa_ops Sudeep Holla
2022-09-07 14:52 ` [PATCH v3 08/10] firmware: arm_ffa: Add v1.1 get_partition_info support Sudeep Holla
2022-09-08 10:05 ` Jens Wiklander
2022-09-07 14:52 ` [PATCH v3 09/10] firmware: arm_ffa: Set up 32bit execution mode flag using partiion property Sudeep Holla
2022-09-08 10:08 ` Jens Wiklander
2022-09-08 10:25 ` Sudeep Holla
2022-09-07 14:52 ` [PATCH v3 10/10] firmware: arm_ffa: Split up ffa_ops into info, message and memory operations Sudeep Holla
2022-09-08 11:24 ` [PATCH v3 00/10] firmware: arm_ffa: Refactoring and initial/minor v1.1 update Sudeep Holla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220907145240.1683088-6-sudeep.holla@arm.com \
--to=sudeep.holla@arm.com \
--cc=achin.gupta@arm.com \
--cc=coboy.chen@mediatek.com \
--cc=jens.wiklander@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lukas.hanel@trustonic.com \
--cc=marc.bonnici@arm.com \
--cc=op-tee@lists.trustedfirmware.org \
--cc=valentin.laurent@trustonic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox