From: Sudeep Holla <sudeep.holla@arm.com>
To: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, op-tee@lists.trustedfirmware.org
Cc: Sudeep Holla <sudeep.holla@arm.com>,
Marc Bonnici <marc.bonnici@arm.com>,
Achin Gupta <achin.gupta@arm.com>,
Jens Wiklander <jens.wiklander@linaro.org>,
Valentin Laurent <valentin.laurent@trustonic.com>,
Lukas Hanel <lukas.hanel@trustonic.com>,
Coboy Chen <coboy.chen@mediatek.com>
Subject: [PATCH v3 08/10] firmware: arm_ffa: Add v1.1 get_partition_info support
Date: Wed, 7 Sep 2022 15:52:38 +0100 [thread overview]
Message-ID: <20220907145240.1683088-9-sudeep.holla@arm.com> (raw)
In-Reply-To: <20220907145240.1683088-1-sudeep.holla@arm.com>
FF-A v1.1 adds support to discovery the UUIDs of the partitions that was
missing in v1.0 and which the driver workarounds by using UUIDs supplied
by the ffa_drivers.
Add the v1.1 get_partition_info support and disable the workaround if
the detected FF-A version is greater than v1.0.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
drivers/firmware/arm_ffa/driver.c | 43 +++++++++++++++++++++++++------
include/linux/arm_ffa.h | 1 +
2 files changed, 36 insertions(+), 8 deletions(-)
diff --git a/drivers/firmware/arm_ffa/driver.c b/drivers/firmware/arm_ffa/driver.c
index 2532e0f16cc9..42bc22220c69 100644
--- a/drivers/firmware/arm_ffa/driver.c
+++ b/drivers/firmware/arm_ffa/driver.c
@@ -264,18 +264,24 @@ static int ffa_rxtx_unmap(u16 vm_id)
return 0;
}
+#define PARTITION_INFO_GET_RETURN_COUNT_ONLY BIT(0)
+
/* buffer must be sizeof(struct ffa_partition_info) * num_partitions */
static int
__ffa_partition_info_get(u32 uuid0, u32 uuid1, u32 uuid2, u32 uuid3,
struct ffa_partition_info *buffer, int num_partitions)
{
- int count;
+ int idx, count, flags = 0, sz, buf_sz;
ffa_value_t partition_info;
+ if (!buffer || !num_partitions) /* Just get the count for now */
+ flags = PARTITION_INFO_GET_RETURN_COUNT_ONLY;
+
mutex_lock(&drv_info->rx_lock);
invoke_ffa_fn((ffa_value_t){
.a0 = FFA_PARTITION_INFO_GET,
.a1 = uuid0, .a2 = uuid1, .a3 = uuid2, .a4 = uuid3,
+ .a5 = flags,
}, &partition_info);
if (partition_info.a0 == FFA_ERROR) {
@@ -285,8 +291,19 @@ __ffa_partition_info_get(u32 uuid0, u32 uuid1, u32 uuid2, u32 uuid3,
count = partition_info.a2;
+ if (drv_info->version > FFA_VERSION_1_0) {
+ buf_sz = sz = partition_info.a3;
+ if (sz > sizeof(*buffer))
+ buf_sz = sizeof(*buffer);
+ } else {
+ /* FFA_VERSION_1_0 lacks size in the response */
+ buf_sz = sz = 8;
+ }
+
if (buffer && count <= num_partitions)
- memcpy(buffer, drv_info->rx_buffer, sizeof(*buffer) * count);
+ for (idx = 0; idx < count; idx++)
+ memcpy(buffer + idx, drv_info->rx_buffer + idx * sz,
+ buf_sz);
ffa_rx_release();
@@ -681,6 +698,14 @@ void ffa_device_match_uuid(struct ffa_device *ffa_dev, const uuid_t *uuid)
int count, idx;
struct ffa_partition_info *pbuf, *tpbuf;
+ /*
+ * FF-A v1.1 provides UUID for each partition as part of the discovery
+ * API, the discovered UUID must be populated in the device's UUID and
+ * there is no need to copy the same from the driver table.
+ */
+ if (drv_info->version > FFA_VERSION_1_0)
+ return;
+
count = ffa_partition_probe(uuid, &pbuf);
if (count <= 0)
return;
@@ -694,6 +719,7 @@ void ffa_device_match_uuid(struct ffa_device *ffa_dev, const uuid_t *uuid)
static void ffa_setup_partitions(void)
{
int count, idx;
+ uuid_t uuid;
struct ffa_device *ffa_dev;
struct ffa_partition_info *pbuf, *tpbuf;
@@ -704,14 +730,15 @@ static void ffa_setup_partitions(void)
}
for (idx = 0, tpbuf = pbuf; idx < count; idx++, tpbuf++) {
- /* Note that the &uuid_null parameter will require
+ import_uuid(&uuid, (u8 *)tpbuf->uuid);
+
+ /* Note that if the UUID will be uuid_null, that will require
* ffa_device_match() to find the UUID of this partition id
- * with help of ffa_device_match_uuid(). Once the FF-A spec
- * is updated to provide correct UUID here for each partition
- * as part of the discovery API, we need to pass the
- * discovered UUID here instead.
+ * with help of ffa_device_match_uuid(). FF-A v1.1 and above
+ * provides UUID here for each partition as part of the
+ * discovery API and the same is passed.
*/
- ffa_dev = ffa_device_register(&uuid_null, tpbuf->id, &ffa_ops);
+ ffa_dev = ffa_device_register(&uuid, tpbuf->id, &ffa_ops);
if (!ffa_dev) {
pr_err("%s: failed to register partition ID 0x%x\n",
__func__, tpbuf->id);
diff --git a/include/linux/arm_ffa.h b/include/linux/arm_ffa.h
index 4c4b06783035..09567ffd1f49 100644
--- a/include/linux/arm_ffa.h
+++ b/include/linux/arm_ffa.h
@@ -107,6 +107,7 @@ struct ffa_partition_info {
/* partition can send and receive indirect messages. */
#define FFA_PARTITION_INDIRECT_MSG BIT(2)
u32 properties;
+ u32 uuid[4];
};
/* For use with FFA_MSG_SEND_DIRECT_{REQ,RESP} which pass data via registers */
--
2.37.3
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-09-07 14:58 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-07 14:52 [PATCH v3 00/10] firmware: arm_ffa: Refactoring and initial/minor v1.1 update Sudeep Holla
2022-09-07 14:52 ` [PATCH v3 01/10] firmware: arm_ffa: Add pointer to the ffa_dev_ops in struct ffa_dev Sudeep Holla
2022-09-07 14:52 ` [PATCH v3 02/10] tee: optee: Drop ffa_ops in optee_ffa structure using ffa_dev->ops directly Sudeep Holla
2022-09-07 14:52 ` [PATCH v3 03/10] firmware: arm_ffa: Remove ffa_dev_ops_get() Sudeep Holla
2022-09-07 14:52 ` [PATCH v3 04/10] firmware: arm_ffa: Add support for querying FF-A features Sudeep Holla
2022-09-07 14:52 ` [PATCH v3 05/10] firmware: arm_ffa: Use FFA_FEATURES to detect if native versions are supported Sudeep Holla
2022-09-07 14:52 ` [PATCH v3 06/10] firmware: arm_ffa: Make memory apis ffa_device independent Sudeep Holla
2022-09-07 14:52 ` [PATCH v3 07/10] firmware: arm_ffa: Rename ffa_dev_ops as ffa_ops Sudeep Holla
2022-09-07 14:52 ` Sudeep Holla [this message]
2022-09-08 10:05 ` [PATCH v3 08/10] firmware: arm_ffa: Add v1.1 get_partition_info support Jens Wiklander
2022-09-07 14:52 ` [PATCH v3 09/10] firmware: arm_ffa: Set up 32bit execution mode flag using partiion property Sudeep Holla
2022-09-08 10:08 ` Jens Wiklander
2022-09-08 10:25 ` Sudeep Holla
2022-09-07 14:52 ` [PATCH v3 10/10] firmware: arm_ffa: Split up ffa_ops into info, message and memory operations Sudeep Holla
2022-09-08 11:24 ` [PATCH v3 00/10] firmware: arm_ffa: Refactoring and initial/minor v1.1 update Sudeep Holla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220907145240.1683088-9-sudeep.holla@arm.com \
--to=sudeep.holla@arm.com \
--cc=achin.gupta@arm.com \
--cc=coboy.chen@mediatek.com \
--cc=jens.wiklander@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lukas.hanel@trustonic.com \
--cc=marc.bonnici@arm.com \
--cc=op-tee@lists.trustedfirmware.org \
--cc=valentin.laurent@trustonic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox