From: Claudiu Beznea <claudiu.beznea@microchip.com>
To: <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
<conor+dt@kernel.org>, <nicolas.ferre@microchip.com>,
<alexandre.belloni@bootlin.com>, <daniel.lezcano@linaro.org>,
<tglx@linutronix.de>, <wim@linux-watchdog.org>,
<linux@roeck-us.net>
Cc: <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <linux-watchdog@vger.kernel.org>,
"Claudiu Beznea" <claudiu.beznea@microchip.com>
Subject: [PATCH v2 4/4] dt-bindings: timer: atmel,at91rm9200-st: convert to yaml
Date: Mon, 29 May 2023 09:26:04 +0300 [thread overview]
Message-ID: <20230529062604.1498052-5-claudiu.beznea@microchip.com> (raw)
In-Reply-To: <20230529062604.1498052-1-claudiu.beznea@microchip.com>
Convert Microchip AT91 system timer to YAML.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
.../devicetree/bindings/arm/atmel-sysregs.txt | 9 ---
.../bindings/timer/atmel,at91rm9200-st.yaml | 65 +++++++++++++++++++
2 files changed, 65 insertions(+), 9 deletions(-)
create mode 100644 Documentation/devicetree/bindings/timer/atmel,at91rm9200-st.yaml
diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
index 54d3f586403e..68c0eacb01ac 100644
--- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
@@ -4,15 +4,6 @@ Chipid required properties:
- compatible: Should be "atmel,sama5d2-chipid" or "microchip,sama7g5-chipid"
- reg : Should contain registers location and length
-System Timer (ST) required properties:
-- compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd"
-- reg: Should contain registers location and length
-- interrupts: Should contain interrupt for the ST which is the IRQ line
- shared across all System Controller members.
-- clocks: phandle to input clock.
-Its subnodes can be:
-- watchdog: compatible should be "atmel,at91rm9200-wdt"
-
RAMC SDRAM/DDR Controller required properties:
- compatible: Should be "atmel,at91rm9200-sdramc", "syscon"
"atmel,at91sam9260-sdramc",
diff --git a/Documentation/devicetree/bindings/timer/atmel,at91rm9200-st.yaml b/Documentation/devicetree/bindings/timer/atmel,at91rm9200-st.yaml
new file mode 100644
index 000000000000..a75644e1a2fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/atmel,at91rm9200-st.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/atmel,at91rm9200-st.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip AT91 System Timer (ST)
+
+maintainers:
+ - Nicolas Ferre <nicolas.ferre@microchip.com>
+ - Alexandre Belloni <alexandre.belloni@microchip.com>
+ - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description:
+ Microchip AT91 system timer integrates a period interval timer, a watchdog
+ timer and a real-time timer.
+
+properties:
+ compatible:
+ items:
+ - const: atmel,at91rm9200-st
+ - const: syscon
+ - const: simple-mfd
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description:
+ Contain interrupt for the ST which is the IRQ line shared across all
+ system controller members.
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ watchdog:
+ $ref: ../watchdog/atmel,at91rm9200-wdt.yaml
+ description:
+ Child node describing watchdog.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ st: timer@fffffd00 {
+ compatible = "atmel,at91rm9200-st", "syscon", "simple-mfd";
+ reg = <0xfffffd00 0x100>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&slow_xtal>;
+
+ watchdog {
+ compatible = "atmel,at91rm9200-wdt";
+ };
+ };
+
+...
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-05-29 6:27 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-29 6:26 [PATCH v2 0/4] dt-bindings: timer: Microchip AT91 convert to YAML Claudiu Beznea
2023-05-29 6:26 ` [PATCH v2 1/4] ARM: dts: at91: sama7g5: keep only microchip,sam9x60-pit64b compatible for pit64b Claudiu Beznea
2023-05-29 12:12 ` Conor Dooley
2023-05-29 6:26 ` [PATCH v2 2/4] dt-bindings: timer: atmel,at91sam9260-pit: convert to yaml Claudiu Beznea
2023-05-29 12:17 ` Conor Dooley
2023-05-29 12:32 ` Claudiu.Beznea
2023-05-29 12:48 ` Conor Dooley
2023-05-29 6:26 ` [PATCH v2 3/4] dt-bindings: watchdog: atmel,at91rm9200-wdt: " Claudiu Beznea
2023-05-29 12:21 ` Conor Dooley
2023-05-29 6:26 ` Claudiu Beznea [this message]
2023-05-29 12:24 ` [PATCH v2 4/4] dt-bindings: timer: atmel,at91rm9200-st: " Conor Dooley
2023-05-29 12:34 ` Claudiu.Beznea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230529062604.1498052-5-claudiu.beznea@microchip.com \
--to=claudiu.beznea@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=conor+dt@kernel.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=nicolas.ferre@microchip.com \
--cc=robh+dt@kernel.org \
--cc=tglx@linutronix.de \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox