Re: [PATCH v2 2/4] dt-bindings: timer: atmel,at91sam9260-pit: convert to yaml

[Conor Dooley <conor.dooley@microchip.com>]

[-- Attachment #1.1: Type: text/plain, Size: 4105 bytes --]

Hey Claudiu,

On Mon, May 29, 2023 at 09:26:02AM +0300, Claudiu Beznea wrote:
> Convert Microchip AT91 PIT bindings to YAML. Along with it clocks and
> clock-names bindings were added as the drivers needs it to ensure proper
> hardware functionality.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---
>  .../devicetree/bindings/arm/atmel-sysregs.txt | 12 ---
>  .../bindings/timer/atmel,at91sam9260-pit.yaml | 96 +++++++++++++++++++
>  2 files changed, 96 insertions(+), 12 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/timer/atmel,at91sam9260-pit.yaml
> 
> diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> index 67a66bf74895..54d3f586403e 100644
> --- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> +++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> @@ -4,18 +4,6 @@ Chipid required properties:
>  - compatible: Should be "atmel,sama5d2-chipid" or "microchip,sama7g5-chipid"
>  - reg : Should contain registers location and length
>  
> -PIT Timer required properties:
> -- compatible: Should be "atmel,at91sam9260-pit"
> -- reg: Should contain registers location and length
> -- interrupts: Should contain interrupt for the PIT which is the IRQ line
> -  shared across all System Controller members.
> -
> -PIT64B Timer required properties:
> -- compatible: Should be "microchip,sam9x60-pit64b"
> -- reg: Should contain registers location and length
> -- interrupts: Should contain interrupt for PIT64B timer
> -- clocks: Should contain the available clock sources for PIT64B timer.
> -
>  System Timer (ST) required properties:
>  - compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd"
>  - reg: Should contain registers location and length
> diff --git a/Documentation/devicetree/bindings/timer/atmel,at91sam9260-pit.yaml b/Documentation/devicetree/bindings/timer/atmel,at91sam9260-pit.yaml
> new file mode 100644
> index 000000000000..1cc7b7494e4b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/atmel,at91sam9260-pit.yaml
> @@ -0,0 +1,96 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/timer/atmel,at91sam9260-pit.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Microchip AT91 Periodic Interval Timer (PIT)
> +
> +maintainers:
> +  - Claudiu Beznea <claudiu.beznea@microchip.com>
> +
> +description:
> +  Microchip AT91 periodic interval timer provides the operating system scheduler
> +  interrupt. It is designed to offer maximum accuracy and efficient management,
> +  even for systems with long response time.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - atmel,at91sam9260-pit
> +      - microchip,sam9x60-pit64b

The missing compatible should probably be added here, rather than
removed from the devicetree.

> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    minItems: 1
> +    maxItems: 2
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: atmel,at91sam9260-pit
> +    then:
> +      properties:

> +        interrupts:
> +          description:
> +            Contain interrupt for the PIT which is the IRQ line shared across all
> +            System Controller members.

I think you should drop this & the corresponding section below, since
both PIT and PIT64 have a single interrupt.

Thanks,
Conor.

> +        clocks:
> +          maxItems: 1
> +
> +    else:
> +      properties:
> +        interrupts:
> +          description:
> +            PIT64B peripheral interrupt identifier.
> +        clocks:
> +          minItems: 2
> +        clock-names:
> +          items:
> +            - const: pclk
> +            - const: gclk
> +      required:
> +        - clock-names


[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel