From: Conor Dooley <conor.dooley@microchip.com>
To: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
<linux-pm@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
Walker Chen <walker.chen@starfivetech.com>,
Conor Dooley <conor@kernel.org>
Subject: Re: [PATCH 13/17] pmdomain: starfive: Move Kconfig file to the pmdomain subsystem
Date: Thu, 14 Sep 2023 12:59:38 +0100 [thread overview]
Message-ID: <20230914-delegator-dimple-51b9414caa28@wendy> (raw)
In-Reply-To: <20230914111904.586744-1-ulf.hansson@linaro.org>
[-- Attachment #1.1: Type: text/plain, Size: 3684 bytes --]
Hey,
On Thu, Sep 14, 2023 at 01:19:04PM +0200, Ulf Hansson wrote:
> The Kconfig belongs closer to the corresponding implementation, hence let's
> move it from the soc subsystem to the pmdomain subsystem.
>
> Cc: Walker Chen <walker.chen@starfivetech.com>
> Cc: Conor Dooley <conor@kernel.org>
> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Thanks for doing this, saved me having to!
The series appears to have broken threading though, which can be seen
pretty easily on lore:
https://lore.kernel.org/all/20230914111904.586744-1-ulf.hansson@linaro.org/
Dunno if something is borked with your process while sending patches to
only a subset of the total recipient list.
> ---
> MAINTAINERS | 2 +-
> drivers/pmdomain/Kconfig | 1 +
> drivers/{soc => pmdomain}/starfive/Kconfig | 0
> drivers/soc/Kconfig | 1 -
> 4 files changed, 2 insertions(+), 2 deletions(-)
> rename drivers/{soc => pmdomain}/starfive/Kconfig (100%)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 6b491ebcf790..b8eae18f0fb1 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -20523,7 +20523,7 @@ M: Conor Dooley <conor@kernel.org>
> S: Maintained
> T: git https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/
> F: Documentation/devicetree/bindings/soc/starfive/
> -F: drivers/soc/starfive/
> +F: drivers/pmdomain/starfive/
This isn't the correct change, just remove the drivers/soc/starfive
bit entirely from this entry.
I've just been doing some review & sending PRs to Arnd for this stuff
(or failing to send the PRs as you saw), I don't have particular
interest in this driver other than helping out the starfive people with
actually getting the code merged.
Instead I think you should generalise the existing entry for the driver
to cover the whole directory, so that it includes the Kconfig bits too:
diff --git a/MAINTAINERS b/MAINTAINERS
index fa7487b7729b..22c1a5e5b130 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20564,7 +20564,7 @@ M: Walker Chen <walker.chen@starfivetech.com>
M: Changhuang Liang <changhuang.liang@starfivetech.com>
S: Supported
F: Documentation/devicetree/bindings/power/starfive*
-F: drivers/pmdomain/starfive/jh71xx-pmu.c
+F: drivers/pmdomain/starfive/
F: include/dt-bindings/power/starfive,jh7110-pmu.h
STARFIVE SOC DRIVERS
Thanks,
Conor.
>
> STARFIVE TRNG DRIVER
> M: Jia Jie Ho <jiajie.ho@starfivetech.com>
> diff --git a/drivers/pmdomain/Kconfig b/drivers/pmdomain/Kconfig
> index cfe9ea754062..67049ebf7265 100644
> --- a/drivers/pmdomain/Kconfig
> +++ b/drivers/pmdomain/Kconfig
> @@ -12,5 +12,6 @@ source "drivers/pmdomain/renesas/Kconfig"
> source "drivers/pmdomain/rockchip/Kconfig"
> source "drivers/pmdomain/samsung/Kconfig"
> source "drivers/pmdomain/st/Kconfig"
> +source "drivers/pmdomain/starfive/Kconfig"
>
> endmenu
> diff --git a/drivers/soc/starfive/Kconfig b/drivers/pmdomain/starfive/Kconfig
> similarity index 100%
> rename from drivers/soc/starfive/Kconfig
> rename to drivers/pmdomain/starfive/Kconfig
> diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
> index 8b46da40f107..10a9ff84ff41 100644
> --- a/drivers/soc/Kconfig
> +++ b/drivers/soc/Kconfig
> @@ -23,7 +23,6 @@ source "drivers/soc/renesas/Kconfig"
> source "drivers/soc/rockchip/Kconfig"
> source "drivers/soc/samsung/Kconfig"
> source "drivers/soc/sifive/Kconfig"
> -source "drivers/soc/starfive/Kconfig"
> source "drivers/soc/sunxi/Kconfig"
> source "drivers/soc/tegra/Kconfig"
> source "drivers/soc/ti/Kconfig"
> --
> 2.34.1
>
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-09-14 12:00 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-14 11:19 [PATCH 13/17] pmdomain: starfive: Move Kconfig file to the pmdomain subsystem Ulf Hansson
2023-09-14 11:59 ` Conor Dooley [this message]
2023-09-14 13:04 ` Walker Chen
2023-09-14 22:24 ` Ulf Hansson
2023-09-14 22:27 ` Conor Dooley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230914-delegator-dimple-51b9414caa28@wendy \
--to=conor.dooley@microchip.com \
--cc=arnd@arndb.de \
--cc=conor@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=olof@lixom.net \
--cc=ulf.hansson@linaro.org \
--cc=walker.chen@starfivetech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox