Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Francesco Dolcini <francesco@dolcini.it>
To: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
	Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: Joao Paulo Goncalves <joao.goncalves@toradex.com>,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Francesco Dolcini <francesco.dolcini@toradex.com>
Subject: [PATCH v2 3/3] arm64: dts: ti: add verdin am62 mallow board
Date: Fri,  1 Dec 2023 15:55:51 +0100	[thread overview]
Message-ID: <20231201145551.23337-4-francesco@dolcini.it> (raw)
In-Reply-To: <20231201145551.23337-1-francesco@dolcini.it>

From: Joao Paulo Goncalves <joao.goncalves@toradex.com>

Add Toradex Verdin AM62 Mallow carrier board support. Mallow is a
low-cost carrier board in the Verdin family with a small form factor and
build for volume production making it ideal for industrial and embedded
applications.

https://www.toradex.com/products/carrier-board/mallow-carrier-board

Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
---
v2: fixed temperature sensor compatible (s/tmp75c/tmp1075)
---
 arch/arm64/boot/dts/ti/Makefile               |   2 +
 .../boot/dts/ti/k3-am62-verdin-mallow.dtsi    | 198 ++++++++++++++++++
 .../dts/ti/k3-am625-verdin-nonwifi-mallow.dts |  22 ++
 .../dts/ti/k3-am625-verdin-wifi-mallow.dts    |  22 ++
 4 files changed, 244 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62-verdin-mallow.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-mallow.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-mallow.dts

diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 77a347f9f47d..92ebf001a217 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -16,9 +16,11 @@ dtb-$(CONFIG_ARCH_K3) += k3-am625-phyboard-lyra-rdk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-sk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dev.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-mallow.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-yavia.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dev.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-mallow.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-yavia.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-sk-hdmi-audio.dtb
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-mallow.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-mallow.dtsi
new file mode 100644
index 000000000000..77b1beb638ad
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-mallow.dtsi
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * Common dtsi for Verdin AM62 SoM on Mallow carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qspi1_clk_gpio>,
+			    <&pinctrl_qspi1_cs_gpio>,
+			    <&pinctrl_qspi1_io0_gpio>,
+			    <&pinctrl_qspi1_io1_gpio>;
+
+		/* SODIMM 52 - USER_LED_1_RED */
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&main_gpio0 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 54 - USER_LED_1_GREEN */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&main_gpio0 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 56 - USER_LED_2_RED */
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 58 - USER_LED_2_GREEN */
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+/* Verdin ETH */
+&cpsw3g {
+	status = "okay";
+};
+
+/* Verdin MDIO */
+&cpsw3g_mdio {
+	status = "okay";
+};
+
+/* Verdin ETH_1*/
+&cpsw_port1 {
+	status = "okay";
+};
+
+/* Verdin PWM_1 and PWM_2*/
+&epwm0 {
+	status = "okay";
+};
+
+/* Verdin PWM_3 DSI */
+&epwm1 {
+	status = "okay";
+};
+
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>,
+		    <&pinctrl_gpio_1>,
+		    <&pinctrl_gpio_2>,
+		    <&pinctrl_gpio_3>,
+		    <&pinctrl_gpio_4>;
+};
+
+/* Verdin I2C_1 */
+&main_i2c1 {
+	status = "okay";
+
+	/* Temperature sensor */
+	sensor@4f {
+		compatible = "ti,tmp1075";
+		reg = <0x4f>;
+	};
+
+	/* EEPROM */
+	eeprom@57 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+/* Verdin I2C_2 DSI */
+&main_i2c2 {
+	status = "okay";
+};
+
+/* Verdin I2C_4 CSI */
+&main_i2c3 {
+	status = "okay";
+};
+
+/* Verdin CAN_1 */
+&main_mcan0 {
+	status = "okay";
+};
+
+/* Verdin SPI_1 */
+&main_spi1 {
+	pinctrl-0 = <&pinctrl_spi1>,
+		    <&pinctrl_spi1_cs0>,
+		    <&pinctrl_qspi1_cs2_gpio>;
+	cs-gpios = <0>, <&main_gpio0 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@1 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qspi1_dqs_gpio>;
+		interrupt-parent = <&main_gpio1>;
+		interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+		spi-max-frequency = <18500000>;
+	};
+};
+
+/* Verdin UART_3 */
+&main_uart0 {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&main_uart1 {
+	status = "okay";
+};
+
+/* Verdin I2C_3_HDMI */
+&mcu_i2c0 {
+	status = "okay";
+};
+
+/* Verdin CAN_2 */
+&mcu_mcan0 {
+	status = "okay";
+};
+
+/* Verdin UART_4 */
+&mcu_uart0 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&sdhci1 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbss0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbss1 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+/* Verdin CTRL_WAKE1_MICO# */
+&verdin_gpio_keys {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&wkup_uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-mallow.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-mallow.dts
new file mode 100644
index 000000000000..9cae12106e0e
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-mallow.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+/dts-v1/;
+
+#include "k3-am625.dtsi"
+#include "k3-am62-verdin.dtsi"
+#include "k3-am62-verdin-nonwifi.dtsi"
+#include "k3-am62-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62 on Mallow Board";
+	compatible = "toradex,verdin-am62-nonwifi-mallow",
+		     "toradex,verdin-am62-nonwifi",
+		     "toradex,verdin-am62",
+		     "ti,am625";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-mallow.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-mallow.dts
new file mode 100644
index 000000000000..81d834b22649
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-mallow.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+/dts-v1/;
+
+#include "k3-am625.dtsi"
+#include "k3-am62-verdin.dtsi"
+#include "k3-am62-verdin-wifi.dtsi"
+#include "k3-am62-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62 WB on Mallow Board";
+	compatible = "toradex,verdin-am62-wifi-mallow",
+		     "toradex,verdin-am62-wifi",
+		     "toradex,verdin-am62",
+		     "ti,am625";
+};
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2023-12-01 14:56 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-12-01 14:55 [PATCH v2 0/3] arm64: dts: ti: add verdin am62 mallow board Francesco Dolcini
2023-12-01 14:55 ` [PATCH v2 1/3] arm64: dts: ti: verdin-am62: improve spi1 chip-select pinctrl Francesco Dolcini
2023-12-01 14:55 ` [PATCH v2 2/3] dt-bindings: arm: ti: add verdin am62 mallow board Francesco Dolcini
2023-12-01 14:55 ` Francesco Dolcini [this message]
2023-12-04 18:13   ` [PATCH v2 3/3] arm64: dts: " Nishanth Menon
2023-12-04 18:36     ` Francesco Dolcini
     [not found]     ` <20240113092025.GA8517@wunner.de>
2024-01-13 12:07       ` Francesco Dolcini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231201145551.23337-4-francesco@dolcini.it \
    --to=francesco@dolcini.it \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=francesco.dolcini@toradex.com \
    --cc=joao.goncalves@toradex.com \
    --cc=kristo@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox