From: Josua Mayer <josua@solid-run.com>
To: Andrew Lunn <andrew@lunn.ch>,
Gregory Clement <gregory.clement@bootlin.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Josua Mayer <josua@solid-run.com>
Subject: [PATCH v3 7/8] arm: dts: marvell: clearfog-gtr-l8: add support for second sfp connector
Date: Tue, 26 Dec 2023 19:11:38 +0100 [thread overview]
Message-ID: <20231226-support-clearfog-gtr-l8-sfp-v3-7-fd1ac2d6bf2e@solid-run.com> (raw)
In-Reply-To: <20231226-support-clearfog-gtr-l8-sfp-v3-0-fd1ac2d6bf2e@solid-run.com>
Clearfog GTR L8 has an extra SFP connector on the managed switch port 9.
Add descriptions for both entities along with pinctrl.
Signed-off-by: Josua Mayer <josua@solid-run.com>
---
.../boot/dts/marvell/armada-385-clearfog-gtr-l8.dts | 20 +++++++++++++++++++-
.../boot/dts/marvell/armada-385-clearfog-gtr.dtsi | 8 +++++++-
2 files changed, 26 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
index cd5b070f1218..2df388f222ec 100644
--- a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
@@ -6,6 +6,16 @@ / {
model = "SolidRun Clearfog GTR L8";
compatible = "solidrun,clearfog-gtr-l8", "marvell,armada385",
"marvell,armada380";
+
+ /* CON25 */
+ sfp1: sfp-1 {
+ compatible = "sff,sfp";
+ pinctrl-0 = <&cf_gtr_sfp1_pins>;
+ pinctrl-names = "default";
+ i2c-bus = <&i2c0>;
+ mod-def0-gpio = <&gpio0 24 GPIO_ACTIVE_LOW>;
+ tx-disable-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+ };
};
&mdio {
@@ -68,11 +78,19 @@ port@8 {
phy-handle = <&switch0phy7>;
};
+ port@9 {
+ reg = <9>;
+ label = "lan-sfp";
+ phy-mode = "sgmii";
+ sfp = <&sfp1>;
+ managed = "in-band-status";
+ };
+
port@10 {
reg = <10>;
phy-mode = "2500base-x";
-
ethernet = <ð1>;
+
fixed-link {
speed = <2500>;
full-duplex;
diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi
index 39ac97edb463..f3a3cb6ac311 100644
--- a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi
@@ -201,6 +201,12 @@ cf_gtr_sfp0_pins: sfp0-pins {
marvell,function = "gpio";
};
+ cf_gtr_sfp1_pins: sfp1-pins {
+ /* sfp modabs, txdisable */
+ marvell,pins = "mpp24", "mpp54";
+ marvell,function = "gpio";
+ };
+
cf_gtr_spi1_cs_pins: spi1-cs-pins {
marvell,pins = "mpp59";
marvell,function = "spi1";
@@ -276,7 +282,7 @@ pcie@3,0 {
};
/* CON5 */
- sfp0: sfp {
+ sfp0: sfp-0 {
compatible = "sff,sfp";
pinctrl-0 = <&cf_gtr_sfp0_pins>;
pinctrl-names = "default";
--
2.35.3
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-12-26 18:12 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-26 18:11 [PATCH v3 0/8] dt-bindings: marvell: a38x: add solidrun armada 388 clearfog boards Josua Mayer
2023-12-26 18:11 ` [PATCH v3 1/8] dt-bindings: marvell: a38x: convert the soc compatibles description to yaml Josua Mayer
2023-12-27 11:49 ` Krzysztof Kozlowski
2023-12-27 12:05 ` Josua Mayer
2023-12-27 12:37 ` Krzysztof Kozlowski
2023-12-26 18:11 ` [PATCH v3 2/8] dt-bindings: marvell: a38x: add solidrun armada 385 clearfog gtr boards Josua Mayer
2023-12-26 19:40 ` Rob Herring
2023-12-27 11:50 ` Krzysztof Kozlowski
2023-12-26 18:11 ` [PATCH v3 3/8] dt-bindings: marvell: a38x: add solidrun armada 388 clearfog boards Josua Mayer
2023-12-26 19:40 ` Rob Herring
2023-12-26 18:11 ` [PATCH v3 4/8] arm: dts: marvell: clearfog-gtr: add board-specific compatible strings Josua Mayer
2023-12-26 18:11 ` [PATCH v3 5/8] arm: dts: marvell: clearfog-gtr: sort pinctrl nodes alphabetically Josua Mayer
2023-12-26 18:11 ` [PATCH v3 6/8] arm: dts: marvell: clearfog-gtr: add missing pinctrl for all used gpios Josua Mayer
2023-12-26 18:11 ` Josua Mayer [this message]
2023-12-26 18:11 ` [PATCH v3 8/8] arm: dts: marvell: clearfog-gtr-l8: align port numbers with enclosure Josua Mayer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231226-support-clearfog-gtr-l8-sfp-v3-7-fd1ac2d6bf2e@solid-run.com \
--to=josua@solid-run.com \
--cc=andrew@lunn.ch \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregory.clement@bootlin.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox