[PATCH v4 4/7] thermal: sun8i: extend H6 calibration to support 4 sensors

From: Andre Przywara <andre.przywara@arm.com>
To: Vasily Khoruzhick <anarsoul@gmail.com>,
	Yangtao Li <tiny.windzz@gmail.com>, Chen-Yu Tsai <wens@csie.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Samuel Holland <samuel@sholland.org>
Cc: "Rafael J . Wysocki" <rafael@kernel.org>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Zhang Rui <rui.zhang@intel.com>,
	Lukasz Luba <lukasz.luba@arm.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Martin Botka <martin.botka@somainline.org>,
	Maksim Kiselev <bigunclemax@gmail.com>,
	Bob McChesney <bob@electricworry.net>,
	linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-sunxi@lists.linux.dev
Subject: [PATCH v4 4/7] thermal: sun8i: extend H6 calibration to support 4 sensors
Date: Fri,  9 Feb 2024 14:42:18 +0000	[thread overview]
Message-ID: <20240209144221.3602382-5-andre.przywara@arm.com> (raw)
In-Reply-To: <20240209144221.3602382-1-andre.przywara@arm.com>

From: Maksim Kiselev <bigunclemax@gmail.com>

The H616 SoC resembles the H6 thermal sensor controller, with a few
changes like four sensors.

Extend sun50i_h6_ths_calibrate() function to support calibration of
these sensors.

Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
Co-developed-by: Martin Botka <martin.botka@somainline.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 drivers/thermal/sun8i_thermal.c | 28 ++++++++++++++++++++--------
 1 file changed, 20 insertions(+), 8 deletions(-)

diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
index 42bee03c4e507..c919b0fd5e169 100644
--- a/drivers/thermal/sun8i_thermal.c
+++ b/drivers/thermal/sun8i_thermal.c
@@ -222,16 +222,21 @@ static int sun50i_h6_ths_calibrate(struct ths_device *tmdev,
 	struct device *dev = tmdev->dev;
 	int i, ft_temp;
 
-	if (!caldata[0] || callen < 2 + 2 * tmdev->chip->sensor_num)
+	if (!caldata[0])
 		return -EINVAL;
 
 	/*
 	 * efuse layout:
 	 *
-	 *	0   11  16	 32
-	 *	+-------+-------+-------+
-	 *	|temp|  |sensor0|sensor1|
-	 *	+-------+-------+-------+
+	 * 0      11  16     27   32     43   48    57
+	 * +----------+-----------+-----------+-----------+
+	 * |  temp |  |sensor0|   |sensor1|   |sensor2|   |
+	 * +----------+-----------+-----------+-----------+
+	 *                      ^           ^           ^
+	 *                      |           |           |
+	 *                      |           |           sensor3[11:8]
+	 *                      |           sensor3[7:4]
+	 *                      sensor3[3:0]
 	 *
 	 * The calibration data on the H6 is the ambient temperature and
 	 * sensor values that are filled during the factory test stage.
@@ -244,9 +249,16 @@ static int sun50i_h6_ths_calibrate(struct ths_device *tmdev,
 	ft_temp = (caldata[0] & FT_TEMP_MASK) * 100;
 
 	for (i = 0; i < tmdev->chip->sensor_num; i++) {
-		int sensor_reg = caldata[i + 1] & TEMP_CALIB_MASK;
-		int cdata, offset;
-		int sensor_temp = tmdev->chip->calc_temp(tmdev, i, sensor_reg);
+		int sensor_reg, sensor_temp, cdata, offset;
+
+		if (i == 3)
+			sensor_reg = (caldata[1] >> 12)
+				     | ((caldata[2] >> 12) << 4)
+				     | ((caldata[3] >> 12) << 8);
+		else
+			sensor_reg = caldata[i + 1] & TEMP_CALIB_MASK;
+
+		sensor_temp = tmdev->chip->calc_temp(tmdev, i, sensor_reg);
 
 		/*
 		 * Calibration data is CALIBRATE_DEFAULT - (calculated
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
