public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: Andre Przywara <andre.przywara@arm.com>
To: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Samuel Holland <samuel@sholland.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org,
	Arnaud Ferraris <arnaud.ferraris@collabora.com>,
	Alexey Klimov <alexey.klimov@linaro.org>,
	Daniel Lezcano <daniel.lezcano@linaro.org>
Subject: Re: [PATCH] arm64: dts: allwinner: a64: Add thermal trip points for GPU
Date: Sun, 11 Feb 2024 12:52:26 +0000	[thread overview]
Message-ID: <20240211125209.15d58462@minigeek.lan> (raw)
In-Reply-To: <20240211105326.506049-1-andrej.skvortzov@gmail.com>

On Sun, 11 Feb 2024 13:53:26 +0300
Andrey Skvortsov <andrej.skvortzov@gmail.com> wrote:

Hi Andrey,

> From: Alexey Klimov <alexey.klimov@linaro.org>
> 
> Without trip points for GPU, the following errors are printed in the
> dmesg log and the sun8i-thermal driver fails to load:

So how does that post differ from Alexey one's a few weeks back:
https://lore.kernel.org/linux-arm-kernel/20240101000008.65747-1-alexey.klimov@linaro.org/
It seems like the same patch?

And Jernej and I had some comments (no mentioning of "Linux" in commit
message, add cooling maps, source of trip temperature values), can you
please try to address them?


> thermal_sys: Failed to find 'trips' node
> thermal_sys: Failed to find trip points for thermal-sensor id=1
> sun8i-thermal: probe of 1c25000.thermal-sensor failed with error -22

I think it's pretty obvious that the trip points are missing when they
shouldn't, so this does not need too much explanation or rationale in
the commit message, so you can cut this short.

> When thermal zones are defined, trip points definitions are mandatory.
> Trip values for the GPU are assumed to be the same values as the CPU
> ones. The available specs do not provide any hints about thermal regimes
> for the GPU and it seems GPU is implemented on the same die as the CPU.
> 
> 'make dtbs_check' complains about problem in dts for 18 A64-based boards
> supported by the kernel:
> 
> sun50i-a64-pine64.dtb: thermal-zones: gpu0-thermal: 'trips' is a required property
> 	from schema $id: http://devicetree.org/schemas/thermal/thermal-zones.yaml#
> sun50i-a64-pine64.dtb: thermal-zones: gpu1-thermal: 'trips' is a required property
> 	from schema $id: http://devicetree.org/schemas/thermal/thermal-zones.yaml#
> 
> Tested on Pine a64+ and PinePhone 1.2.
> 
> Cc: Samuel Holland <samuel@sholland.org>
> Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
> Cc: Chen-Yu Tsai <wens@csie.org>
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
> Tested-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>

You would need your Signed-off-by: here, since you send this, even when
on Alexey's behalf.

Cheers,
Andre

> 
> ---
>  arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 46 +++++++++++++++++++
>  1 file changed, 46 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> index 57ac18738c99..c25da7229e42 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> @@ -244,6 +244,29 @@ gpu0_thermal: gpu0-thermal {
>  			polling-delay-passive = <0>;
>  			polling-delay = <0>;
>  			thermal-sensors = <&ths 1>;
> +
> +			trips {
> +				gpu0_alert0: gpu0_alert0 {
> +					/* milliCelsius */
> +					temperature = <75000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				gpu0_alert1: gpu0_alert1 {
> +					/* milliCelsius */
> +					temperature = <90000>;
> +					hysteresis = <2000>;
> +					type = "hot";
> +				};
> +
> +				gpu0_crit: gpu0_crit {
> +					/* milliCelsius */
> +					temperature = <110000>;
> +					hysteresis = <2000>;
> +					type = "critical";
> +				};
> +			};
>  		};
>  
>  		gpu1_thermal: gpu1-thermal {
> @@ -251,6 +274,29 @@ gpu1_thermal: gpu1-thermal {
>  			polling-delay-passive = <0>;
>  			polling-delay = <0>;
>  			thermal-sensors = <&ths 2>;
> +
> +			trips {
> +				gpu1_alert0: gpu1_alert0 {
> +					/* milliCelsius */
> +					temperature = <75000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				gpu1_alert1: gpu1_alert1 {
> +					/* milliCelsius */
> +					temperature = <90000>;
> +					hysteresis = <2000>;
> +					type = "hot";
> +				};
> +
> +				gpu1_crit: gpu1_crit {
> +					/* milliCelsius */
> +					temperature = <110000>;
> +					hysteresis = <2000>;
> +					type = "critical";
> +				};
> +			};
>  		};
>  	};
>  


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2024-02-11 12:54 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-11 10:53 [PATCH] arm64: dts: allwinner: a64: Add thermal trip points for GPU Andrey Skvortsov
2024-02-11 12:52 ` Andre Przywara [this message]
2024-02-11 14:24   ` Andrey Skvortsov
2024-02-12  0:07     ` Andre Przywara
  -- strict thread matches above, loose matches on Subject: below --
2023-06-05  3:58 Alexey Klimov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240211125209.15d58462@minigeek.lan \
    --to=andre.przywara@arm.com \
    --cc=alexey.klimov@linaro.org \
    --cc=andrej.skvortzov@gmail.com \
    --cc=arnaud.ferraris@collabora.com \
    --cc=conor+dt@kernel.org \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jernej.skrabec@gmail.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=robh+dt@kernel.org \
    --cc=samuel@sholland.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox