From: Andre Przywara <andre.przywara@arm.com>
To: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Samuel Holland <samuel@sholland.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org,
Arnaud Ferraris <arnaud.ferraris@collabora.com>,
Alexey Klimov <alexey.klimov@linaro.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>
Subject: Re: [PATCH] arm64: dts: allwinner: a64: Add thermal trip points for GPU
Date: Mon, 12 Feb 2024 00:07:27 +0000 [thread overview]
Message-ID: <20240212000727.4690bdb6@minigeek.lan> (raw)
In-Reply-To: <ZcjYk8MD4jotKNcq@skv.local>
On Sun, 11 Feb 2024 17:24:19 +0300
Andrey Skvortsov <andrej.skvortzov@gmail.com> wrote:
Hi Andrey,
> Hi Andre,
>
> On 24-02-11 12:52, Andre Przywara wrote:
> > On Sun, 11 Feb 2024 13:53:26 +0300
> > Andrey Skvortsov <andrej.skvortzov@gmail.com> wrote:
> >
> > Hi Andrey,
> >
> > > From: Alexey Klimov <alexey.klimov@linaro.org>
> > >
> > > Without trip points for GPU, the following errors are printed in the
> > > dmesg log and the sun8i-thermal driver fails to load:
> >
> > So how does that post differ from Alexey one's a few weeks back:
> > https://lore.kernel.org/linux-arm-kernel/20240101000008.65747-1-alexey.klimov@linaro.org/
> > It seems like the same patch?
>
> Yes, it's the same patch. I've added only information about failed
> dtbs_check errors in already supported boards to commit message.
> I've found this patch from June 2023 without any feedback. [1] Since I've
> worked on dts changes for PinePhone A64, I've decided to resend
> it. Sorry, I wasn't aware that Alexey resent it in the mean time.
No worries, that's fine, thanks for the explanation.
> It's better to continue discussion in original Alexey's patch.
Will Alexey have time to reply and resend? If not, or if you are not
sure (it's been a while), it's fine to take over this series, and send a
v2, by yourself.
If you can just explicitly state that the GPU trip point values are
copied from the CPU ones (because they share a die), I am happy as far
as my comment is concerned. This is arguably somewhat mentioned in the
commit message already, but I missed it on the first read, so would like
to see this more prominently stated.
As mentioned before, and also stated by Jernej, consider this patch
purely device-specific, not related to any Linux behaviour, and give
rationale only based on the binding, which requires trip points.
Something simple as "The DT binding requires trip points, and
dt-validate complains about them missing for any A64 boards." should
suffice.
Thanks,
Andre
> > And Jernej and I had some comments (no mentioning of "Linux" in commit
> > message, add cooling maps, source of trip temperature values), can you
> > please try to address them?
> >
> >
> > > thermal_sys: Failed to find 'trips' node
> > > thermal_sys: Failed to find trip points for thermal-sensor id=1
> > > sun8i-thermal: probe of 1c25000.thermal-sensor failed with error -22
> >
> > I think it's pretty obvious that the trip points are missing when they
> > shouldn't, so this does not need too much explanation or rationale in
> > the commit message, so you can cut this short.
> >
> > > When thermal zones are defined, trip points definitions are mandatory.
> > > Trip values for the GPU are assumed to be the same values as the CPU
> > > ones. The available specs do not provide any hints about thermal regimes
> > > for the GPU and it seems GPU is implemented on the same die as the CPU.
> > >
> > > 'make dtbs_check' complains about problem in dts for 18 A64-based boards
> > > supported by the kernel:
> > >
> > > sun50i-a64-pine64.dtb: thermal-zones: gpu0-thermal: 'trips' is a required property
> > > from schema $id: http://devicetree.org/schemas/thermal/thermal-zones.yaml#
> > > sun50i-a64-pine64.dtb: thermal-zones: gpu1-thermal: 'trips' is a required property
> > > from schema $id: http://devicetree.org/schemas/thermal/thermal-zones.yaml#
> > >
> > > Tested on Pine a64+ and PinePhone 1.2.
> > >
> > > Cc: Samuel Holland <samuel@sholland.org>
> > > Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
> > > Cc: Chen-Yu Tsai <wens@csie.org>
> > > Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> > > Cc: devicetree@vger.kernel.org
> > > Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
> > > Tested-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
> >
> > You would need your Signed-off-by: here, since you send this, even when
> > on Alexey's behalf.
> >
> > Cheers,
> > Andre
> >
>
> 1. https://lkml.org/lkml/2023/6/4/416
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-02-12 3:45 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-11 10:53 [PATCH] arm64: dts: allwinner: a64: Add thermal trip points for GPU Andrey Skvortsov
2024-02-11 12:52 ` Andre Przywara
2024-02-11 14:24 ` Andrey Skvortsov
2024-02-12 0:07 ` Andre Przywara [this message]
-- strict thread matches above, loose matches on Subject: below --
2023-06-05 3:58 Alexey Klimov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240212000727.4690bdb6@minigeek.lan \
--to=andre.przywara@arm.com \
--cc=alexey.klimov@linaro.org \
--cc=andrej.skvortzov@gmail.com \
--cc=arnaud.ferraris@collabora.com \
--cc=conor+dt@kernel.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=jernej.skrabec@gmail.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=robh+dt@kernel.org \
--cc=samuel@sholland.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox