[PATCH] mediatek: dsi: Correct calculation formula of PHY Timing

From: Shuijing Li <shuijing.li@mediatek.com>
To: <chunkuang.hu@kernel.org>, <p.zabel@pengutronix.de>,
	<airlied@gmail.com>, <daniel@ffwll.ch>, <matthias.bgg@gmail.com>,
	<angelogioacchino.delregno@collabora.com>,
	<jitao.shi@mediatek.com>
Cc: <dri-devel@lists.freedesktop.org>,
	<linux-mediatek@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<Project_Global_Chrome_Upstream_Group@mediatek.com>,
	Shuijing Li <shuijing.li@mediatek.com>
Subject: [PATCH] mediatek: dsi: Correct calculation formula of PHY Timing
Date: Fri, 15 Mar 2024 15:29:17 +0800	[thread overview]
Message-ID: <20240315072945.19502-1-shuijing.li@mediatek.com> (raw)

This patch correct calculation formula of PHY timing.
Make actual phy timing more accurate.

Signed-off-by: Shuijing Li <shuijing.li@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dsi.c | 33 +++++++++++++++---------------
 1 file changed, 17 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index a2fdfc8ddb15..d1bd7d671880 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -235,22 +235,23 @@ static void mtk_dsi_phy_timconfig(struct mtk_dsi *dsi)
 	u32 data_rate_mhz = DIV_ROUND_UP(dsi->data_rate, 1000000);
 	struct mtk_phy_timing *timing = &dsi->phy_timing;
 
-	timing->lpx = (60 * data_rate_mhz / (8 * 1000)) + 1;
-	timing->da_hs_prepare = (80 * data_rate_mhz + 4 * 1000) / 8000;
-	timing->da_hs_zero = (170 * data_rate_mhz + 10 * 1000) / 8000 + 1 -
-			     timing->da_hs_prepare;
-	timing->da_hs_trail = timing->da_hs_prepare + 1;
-
-	timing->ta_go = 4 * timing->lpx - 2;
-	timing->ta_sure = timing->lpx + 2;
-	timing->ta_get = 4 * timing->lpx;
-	timing->da_hs_exit = 2 * timing->lpx + 1;
-
-	timing->clk_hs_prepare = 70 * data_rate_mhz / (8 * 1000);
-	timing->clk_hs_post = timing->clk_hs_prepare + 8;
-	timing->clk_hs_trail = timing->clk_hs_prepare;
-	timing->clk_hs_zero = timing->clk_hs_trail * 4;
-	timing->clk_hs_exit = 2 * timing->clk_hs_trail;
+	timing->lpx = (80 * data_rate_mhz / (8 * 1000)) + 1;
+	timing->da_hs_prepare = (59 * data_rate_mhz + 4 * 1000) / 8000 + 1;
+	timing->da_hs_zero = (163 * data_rate_mhz + 11 * 1000) / 8000 + 1 -
+		timing->da_hs_prepare;
+	timing->da_hs_trail = (78 * data_rate_mhz + 7 * 1000) / 8000 + 1;
+
+	timing->ta_go = 4 * timing->lpx;
+	timing->ta_sure = 3 * timing->lpx / 2;
+	timing->ta_get = 5 * timing->lpx;
+	timing->da_hs_exit = (118 * data_rate_mhz / (8 * 1000)) + 1;
+
+	timing->clk_hs_prepare = (57 * data_rate_mhz / (8 * 1000)) + 1;
+	timing->clk_hs_post = (65 * data_rate_mhz + 53 * 1000) / 8000 + 1;
+	timing->clk_hs_trail = (78 * data_rate_mhz + 7 * 1000) / 8000 + 1;
+	timing->clk_hs_zero = (330 * data_rate_mhz / (8 * 1000)) + 1 -
+		timing->clk_hs_prepare;
+	timing->clk_hs_exit = (118 * data_rate_mhz / (8 * 1000)) + 1;
 
 	timcon0 = timing->lpx | timing->da_hs_prepare << 8 |
 		  timing->da_hs_zero << 16 | timing->da_hs_trail << 24;
-- 
2.43.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
