From: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
To: patrick@stwcx.xyz, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@codeconstruct.com.au>
Cc: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH v7 09/22] ARM: dts: aspeed: yosemite4: Enable interrupt setting for pca9555
Date: Thu, 21 Mar 2024 10:12:21 +0800 [thread overview]
Message-ID: <20240321021236.1823693-10-Delphine_CC_Chiu@wiwynn.com> (raw)
In-Reply-To: <20240321021236.1823693-1-Delphine_CC_Chiu@wiwynn.com>
Enable interrupt setting for pca9555
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
---
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 56 +++++++++++++++++--
1 file changed, 52 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index f6527f0dbeb4..d1ee5a6bd7d3 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -832,30 +832,78 @@ power-sensor@12 {
gpio@20 {
compatible = "nxp,pca9555";
- reg = <0x20>;
+ pinctrl-names = "default";
gpio-controller;
#gpio-cells = <2>;
+ reg = <0x20>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+ gpio-line-names =
+ "P48V-OCP-GPIO1","P48V-OCP-GPIO2",
+ "P48V-OCP-GPIO3","FAN-BOARD-0-REVISION-0-R",
+ "FAN-BOARD-0-REVISION-1-R","FAN-BOARD-1-REVISION-0-R",
+ "FAN-BOARD-1-REVISION-1-R","RST-MUX-R-N",
+ "RST-LED-CONTROL-FAN-BOARD-0-N","RST-LED-CONTROL-FAN-BOARD-1-N",
+ "RST-IOEXP-FAN-BOARD-0-N","RST-IOEXP-FAN-BOARD-1-N",
+ "PWRGD-LOAD-SWITCH-FAN-BOARD-0-R","PWRGD-LOAD-SWITCH-FAN-BOARD-1-R",
+ "","";
};
gpio@21 {
compatible = "nxp,pca9555";
- reg = <0x21>;
+ pinctrl-names = "default";
gpio-controller;
#gpio-cells = <2>;
+ reg = <0x21>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+ gpio-line-names =
+ "HSC-OCP-SLOT-ODD-GPIO1","HSC-OCP-SLOT-ODD-GPIO2",
+ "HSC-OCP-SLOT-ODD-GPIO3","HSC-OCP-SLOT-EVEN-GPIO1",
+ "HSC-OCP-SLOT-EVEN-GPIO2","HSC-OCP-SLOT-EVEN-GPIO3",
+ "ADC-TYPE-0-R","ADC-TYPE-1-R",
+ "MEDUSA-BOARD-REV-0","MEDUSA-BOARD-REV-1",
+ "MEDUSA-BOARD-REV-2","MEDUSA-BOARD-TYPE",
+ "DELTA-MODULE-TYPE","P12V-HSC-TYPE",
+ "","";
};
gpio@22 {
compatible = "nxp,pca9555";
- reg = <0x22>;
+ pinctrl-names = "default";
gpio-controller;
#gpio-cells = <2>;
+ reg = <0x22>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+ gpio-line-names =
+ "CARD-TYPE-SLOT1","CARD-TYPE-SLOT2",
+ "CARD-TYPE-SLOT3","CARD-TYPE-SLOT4",
+ "CARD-TYPE-SLOT5","CARD-TYPE-SLOT6",
+ "CARD-TYPE-SLOT7","CARD-TYPE-SLOT8",
+ "OC-P48V-HSC-0-N","FLT-P48V-HSC-0-N",
+ "OC-P48V-HSC-1-N","FLT-P48V-HSC-1-N",
+ "EN-P48V-AUX-0","EN-P48V-AUX-1",
+ "PWRGD-P12V-AUX-0","PWRGD-P12V-AUX-1";
};
gpio@23 {
compatible = "nxp,pca9555";
- reg = <0x23>;
+ pinctrl-names = "default";
gpio-controller;
#gpio-cells = <2>;
+ reg = <0x23>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+ gpio-line-names =
+ "HSC1-ALERT1-R-N","HSC2-ALERT1-R-N",
+ "HSC3-ALERT1-R-N","HSC4-ALERT1-R-N",
+ "HSC5-ALERT1-R-N","HSC6-ALERT1-R-N",
+ "HSC7-ALERT1-R-N","HSC8-ALERT1-R-N",
+ "HSC1-ALERT2-R-N","HSC2-ALERT2-R-N",
+ "HSC3-ALERT2-R-N","HSC4-ALERT2-R-N",
+ "HSC5-ALERT2-R-N","HSC6-ALERT2-R-N",
+ "HSC7-ALERT2-R-N","HSC8-ALERT2-R-N";
};
temperature-sensor@48 {
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-03-21 2:14 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-21 2:12 [PATCH v7 00/22] Add i2c-mux and eeprom devices for Meta Yosemite 4 Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 01/22] ARM: dts: aspeed: yosemite4: Revise i2c-mux devices Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 02/22] ARM: dts: aspeed: yosemite4: Enable adc15 Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 03/22] ARM: dts: aspeed: yosemite4: Enable spi-gpio setting Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 04/22] ARM: dts: aspeed: yosemite4: Enable watchdog2 Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 05/22] ARM: dts: aspeed: yosemite4: Revise quad mode to dual mode Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 06/22] ARM: dts: aspeed: yosemite4: Revise power sensor adm1281 for schematic change Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 07/22] ARM: dts: aspeed: yosemite4: Add gpio pca9506 Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 08/22] ARM: dts: aspeed: yosemite4: Remove space for adm1272 compatible Delphine CC Chiu
2024-03-21 2:12 ` Delphine CC Chiu [this message]
2024-03-21 2:12 ` [PATCH v7 10/22] ARM: dts: aspeed: yosemite4: Add power sensor for power module reading Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 11/22] ARM: dts: aspeed: yosemite4: Add eeprom for yosemite4 use Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 12/22] ARM: dts: aspeed: yosemite4: Remove temperature sensor for yosemite4 schematic change Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 13/22] ARM: dts: aspeed: yosemite4: Revise adc128d818 adc mode " Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 14/22] ARM: dts: aspeed: yosemite4: Revise ina233 config " Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 15/22] ARM: dts: aspeed: yosemite4: Remove idle state setting for yosemite4 NIC connection Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 16/22] ARM: dts: aspeed: yosemite4: Initialize bmc gpio state Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 17/22] ARM: dts: aspeed: yosemite4: Revise mx31790 fan tach config Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 18/22] ARM: dts: aspeed: yosemite4: add mctp config for NIC Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 19/22] ARM: dts: aspeed: yosemite4: support mux to cpld Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 20/22] ARM: dts: aspeed: yosemite4: support medusa board adc sensors Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 21/22] ARM: dts: aspeed: yosemite4: support NIC eeprom Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 22/22] ARM: dts: aspeed: yosemite4: Revise i2c duty-cycle Delphine CC Chiu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240321021236.1823693-10-Delphine_CC_Chiu@wiwynn.com \
--to=delphine_cc_chiu@wiwynn.com \
--cc=andrew@codeconstruct.com.au \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patrick@stwcx.xyz \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox