From: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
To: patrick@stwcx.xyz, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@codeconstruct.com.au>
Cc: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH v7 17/22] ARM: dts: aspeed: yosemite4: Revise mx31790 fan tach config
Date: Thu, 21 Mar 2024 10:12:29 +0800 [thread overview]
Message-ID: <20240321021236.1823693-18-Delphine_CC_Chiu@wiwynn.com> (raw)
In-Reply-To: <20240321021236.1823693-1-Delphine_CC_Chiu@wiwynn.com>
Revise fan tach config for max31790 driver change
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
---
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 48 +++++++++++++++++--
1 file changed, 44 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index d59542a9ef75..e0ca0f7b65ea 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -1095,8 +1095,18 @@ adc@1f {
pwm@20{
compatible = "maxim,max31790";
- pwm-as-tach = <4 5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0x20>;
+ channel@4 {
+ reg = <4>;
+ sensor-type = "TACH";
+ };
+
+ channel@5 {
+ reg = <5>;
+ sensor-type = "TACH";
+ };
};
gpio@22{
@@ -1108,8 +1118,18 @@ gpio@22{
pwm@2f{
compatible = "maxim,max31790";
- pwm-as-tach = <4 5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0x2f>;
+ channel@4 {
+ reg = <4>;
+ sensor-type = "TACH";
+ };
+
+ channel@5 {
+ reg = <5>;
+ sensor-type = "TACH";
+ };
};
adc@33 {
@@ -1145,8 +1165,18 @@ adc@1f {
pwm@20{
compatible = "maxim,max31790";
- pwm-as-tach = <4 5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0x20>;
+ channel@4 {
+ reg = <4>;
+ sensor-type = "TACH";
+ };
+
+ channel@5 {
+ reg = <5>;
+ sensor-type = "TACH";
+ };
};
gpio@22{
@@ -1158,8 +1188,18 @@ gpio@22{
pwm@2f{
compatible = "maxim,max31790";
- pwm-as-tach = <4 5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0x2f>;
+ channel@4 {
+ reg = <4>;
+ sensor-type = "TACH";
+ };
+
+ channel@5 {
+ reg = <5>;
+ sensor-type = "TACH";
+ };
};
adc@33 {
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-03-21 2:14 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-21 2:12 [PATCH v7 00/22] Add i2c-mux and eeprom devices for Meta Yosemite 4 Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 01/22] ARM: dts: aspeed: yosemite4: Revise i2c-mux devices Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 02/22] ARM: dts: aspeed: yosemite4: Enable adc15 Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 03/22] ARM: dts: aspeed: yosemite4: Enable spi-gpio setting Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 04/22] ARM: dts: aspeed: yosemite4: Enable watchdog2 Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 05/22] ARM: dts: aspeed: yosemite4: Revise quad mode to dual mode Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 06/22] ARM: dts: aspeed: yosemite4: Revise power sensor adm1281 for schematic change Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 07/22] ARM: dts: aspeed: yosemite4: Add gpio pca9506 Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 08/22] ARM: dts: aspeed: yosemite4: Remove space for adm1272 compatible Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 09/22] ARM: dts: aspeed: yosemite4: Enable interrupt setting for pca9555 Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 10/22] ARM: dts: aspeed: yosemite4: Add power sensor for power module reading Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 11/22] ARM: dts: aspeed: yosemite4: Add eeprom for yosemite4 use Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 12/22] ARM: dts: aspeed: yosemite4: Remove temperature sensor for yosemite4 schematic change Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 13/22] ARM: dts: aspeed: yosemite4: Revise adc128d818 adc mode " Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 14/22] ARM: dts: aspeed: yosemite4: Revise ina233 config " Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 15/22] ARM: dts: aspeed: yosemite4: Remove idle state setting for yosemite4 NIC connection Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 16/22] ARM: dts: aspeed: yosemite4: Initialize bmc gpio state Delphine CC Chiu
2024-03-21 2:12 ` Delphine CC Chiu [this message]
2024-03-21 2:12 ` [PATCH v7 18/22] ARM: dts: aspeed: yosemite4: add mctp config for NIC Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 19/22] ARM: dts: aspeed: yosemite4: support mux to cpld Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 20/22] ARM: dts: aspeed: yosemite4: support medusa board adc sensors Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 21/22] ARM: dts: aspeed: yosemite4: support NIC eeprom Delphine CC Chiu
2024-03-21 2:12 ` [PATCH v7 22/22] ARM: dts: aspeed: yosemite4: Revise i2c duty-cycle Delphine CC Chiu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240321021236.1823693-18-Delphine_CC_Chiu@wiwynn.com \
--to=delphine_cc_chiu@wiwynn.com \
--cc=andrew@codeconstruct.com.au \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patrick@stwcx.xyz \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox