[PATCH] drm/stm: dsi: relax mode_valid clock tolerance

From: Sean Nyekjaer <sean@geanix.com>
To: Yannick Fertre <yannick.fertre@foss.st.com>,
	Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>,
	Philippe Cornu <philippe.cornu@foss.st.com>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Maxime Ripard <mripard@kernel.org>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Robert Foss <rfoss@kernel.org>,
	Antonio Borneo <antonio.borneo@foss.st.com>
Cc: Sean Nyekjaer <sean@geanix.com>,
	dri-devel@lists.freedesktop.org,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] drm/stm: dsi: relax mode_valid clock tolerance
Date: Fri, 22 Mar 2024 11:47:31 +0100	[thread overview]
Message-ID: <20240322104732.2327060-1-sean@geanix.com> (raw)

When using the DSI interface via DSI2LVDS bridge, it seems a bit harsh
to reguire the requested and the actual px clock to be within
50Hz. A typical LVDS display requires the px clock to be within +-10%.

In case for HDMI .5% tolerance is required.

Fixes: e01356d18273 ("drm/stm: dsi: provide the implementation of mode_valid()")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
---
 drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
index d5f8c923d7bc..97936b0ef702 100644
--- a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
+++ b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
@@ -322,8 +322,6 @@ dw_mipi_dsi_phy_get_timing(void *priv_data, unsigned int lane_mbps,
 	return 0;
 }
 
-#define CLK_TOLERANCE_HZ 50
-
 static enum drm_mode_status
 dw_mipi_dsi_stm_mode_valid(void *priv_data,
 			   const struct drm_display_mode *mode,
@@ -375,9 +373,10 @@ dw_mipi_dsi_stm_mode_valid(void *priv_data,
 		/*
 		 * Filter modes according to the clock value, particularly useful for
 		 * hdmi modes that require precise pixel clocks.
+		 * Check that px_clock is within .5% tolerance.
 		 */
-		if (px_clock_hz < target_px_clock_hz - CLK_TOLERANCE_HZ ||
-		    px_clock_hz > target_px_clock_hz + CLK_TOLERANCE_HZ)
+		if (px_clock_hz < mult_frac(target_px_clock_hz, 995, 1000) ||
+		    px_clock_hz > mult_frac(target_px_clock_hz, 1005, 1000))
 			return MODE_CLOCK_RANGE;
 
 		/* sync packets are codes as DSI short packets (4 bytes) */
-- 
2.44.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
