[PATCH v6 0/2] Add Reviewed-by and Acked-by tags

[PATCH v6 0/2] Add Reviewed-by and Acked-by tags

[Kelly Hung]

There are no changes to the Patch file, just the reviewed and acked tags are added.
PATCH v5 has been merged into the next branch.

Kelly Hung (2):
  dt-bindings: arm: aspeed: add ASUS X4TF board
  ARM: dts: aspeed: x4tf: Add dts for asus x4tf project

 .../bindings/arm/aspeed/aspeed.yaml           |   1 +
 arch/arm/boot/dts/aspeed/Makefile             |   1 +
 .../boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts  | 581 ++++++++++++++++++
 3 files changed, 583 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts

-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v6 1/2] dt-bindings: arm: aspeed: add ASUS X4TF board

[Kelly Hung]

Document the new compatibles used on ASUS X4TF.

Signed-off-by: Kelly Hung <Kelly_Hung@asus.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
v5 -> v6:
- Add Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
- Add Reviewed-by: Rob Herring <robh@kernel.org>
- Add Reviewed-by: Zev Weiss <zweiss@equinix.com>
- Add Acked-by: Conor Dooley <conor.dooley@microchip.com>
V4 -> V5: Update all changelog from v1 to v5.
V3 -> V4: The new compatible is a BMC for a ASUS X4TF server which use 
a ast2600-a3 chip, so correct string to asus,x4tf-bmc.
V2 -> V3: Add a label to indicate it is new compatible for bmc.
V1 -> V2: Remove blank in front of the string x4tf.
---
 Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
index 749ee54a3..0047eb4ab 100644
--- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
+++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
@@ -74,6 +74,7 @@ properties:
               - ampere,mtmitchell-bmc
               - aspeed,ast2600-evb
               - aspeed,ast2600-evb-a1
+              - asus,x4tf-bmc
               - facebook,bletchley-bmc
               - facebook,cloudripper-bmc
               - facebook,elbert-bmc
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v6 2/2] ARM: dts: aspeed: x4tf: Add dts for asus x4tf project

[Kelly Hung]

Base on aspeed-g6.dtsi and can boot into BMC console.

Signed-off-by: Kelly Hung <Kelly_Hung@asus.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
---
v5 -> v6:
- Add Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
- Add Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
- Remove the v3's Reviewed-by: Zev Weiss <zweiss@equinix.com>.
V4 -> V5: None
V3 -> V4: None
V2 -> V3:
- fmc lable change to bmc.
- use 64M partition layout.
- rename spi1 label to bios.
- remove bios partition section.
- add Reviewed-by: Zev Weiss <zweiss@equinix.com>
V1 -> V2:
- do schema check and remove all warings.
- remove all unnecessary sections.
---
 arch/arm/boot/dts/aspeed/Makefile             |   1 +
 .../boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts  | 581 ++++++++++++++++++
 2 files changed, 582 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts

diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index d3ac20e31..32c41f3d9 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-arm-stardragon4800-rep2.dtb \
 	aspeed-bmc-asrock-e3c246d4i.dtb \
 	aspeed-bmc-asrock-romed8hm3.dtb \
+	aspeed-bmc-asus-x4tf.dtb \
 	aspeed-bmc-bytedance-g220a.dtb \
 	aspeed-bmc-delta-ahe50dc.dtb \
 	aspeed-bmc-facebook-bletchley.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts
new file mode 100644
index 000000000..64f4ed07c
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts
@@ -0,0 +1,581 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 ASUS Corp.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include "aspeed-g6-pinctrl.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "ASUS-X4TF";
+	compatible = "asus,x4tf-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial4:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+				<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+				<&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+				<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-heartbeat {
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-uid {
+			gpios = <&gpio0 ASPEED_GPIO(P, 1) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+			default-state = "off";
+		};
+
+		led-status_Y {
+			gpios = <&gpio1 ASPEED_GPIO(B, 1) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-sys_boot_status {
+			gpios = <&gpio1 ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&adc0 {
+	vref = <2500>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref = <2500>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&lpc_snoop {
+	snoop-ports = <0x80>;
+	status = "okay";
+};
+
+&mac2 {
+	status = "okay";
+	phy-mode = "rmii";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+	phy-mode = "rmii";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "bios";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+
+	pca9555_4_20: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9555_4_22: gpio@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9555_4_24: gpio@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*A0 - A3 0*/	"", "STRAP_BMC_BATTERY_GPIO1", "", "",
+		/*A4 - A7 4*/	"", "", "", "",
+		/*B0 - B7 8*/	"", "", "", "", "", "", "", "";
+	};
+
+	pca9555_4_26: gpio@26 {
+		compatible = "nxp,pca9555";
+		reg = <0x26>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel_1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_2: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_3: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_4: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	pca9555_5_24: gpio@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	i2c-mux@70  {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x70 >;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel_5: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			pca9555_5_5_20: gpio@20 {
+				compatible = "nxp,pca9555";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"", "", "", "", "", "", "", "",
+					"", "", "SYS_FAN6", "SYS_FAN5",
+					"SYS_FAN4", "SYS_FAN3",
+					"SYS_FAN2", "SYS_FAN1";
+			};
+
+			pca9555_5_5_21: gpio@21 {
+				compatible = "nxp,pca9555";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina219";
+				reg = <0x44>;
+				shunt-resistor = <2>;
+			};
+		};
+
+		channel_6: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_7: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_8: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	pca9555_6_27: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9555_6_20: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*A0 0*/	"", "", "", "", "", "", "", "",
+		/*B0 8*/	"Drive_NVMe1", "Drive_NVMe2", "", "",
+		/*B4 12*/	"", "", "", "";
+	};
+
+	pca9555_6_21: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		idle-state = <1>;
+
+		channel_9: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina219";
+				reg = <0x40>;
+				shunt-resistor = <2>;
+			};
+
+			power-monitor@41 {
+				compatible = "ti,ina219";
+				reg = <0x41>;
+				shunt-resistor = <5>;
+			};
+		};
+
+		channel_10: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_11: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_12: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		channel_13: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_14: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_15: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_16: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		channel_17: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_18: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			power-monitor@41 {
+				compatible = "ti,ina219";
+				reg = <0x41>;
+				shunt-resistor = <5>;
+			};
+		};
+
+		channel_19: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_20: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+	multi-master;
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c08";
+		reg = <0x51>;
+	};
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&sdc {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&kcs1 {
+	aspeed,lpc-io-reg = <0xca0>;
+	status = "okay";
+};
+
+&kcs2 {
+	aspeed,lpc-io-reg = <0xca8>;
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0 0*/	"", "", "", "", "", "", "", "",
+	/*B0 8*/	"", "", "", "", "", "", "PS_PWROK", "",
+	/*C0 16*/	"", "", "", "", "", "", "", "",
+	/*D0 24*/	"", "", "", "", "", "", "", "",
+	/*E0 32*/	"", "", "", "", "", "", "", "",
+	/*F0 40*/	"", "", "", "", "", "", "", "",
+	/*G0 48*/	"", "", "", "", "", "", "", "",
+	/*H0 56*/	"", "", "", "", "", "", "", "",
+	/*I0 64*/	"", "", "", "", "", "", "", "",
+	/*J0 72*/	"", "", "", "", "", "", "", "",
+	/*K0 80*/	"", "", "", "", "", "", "", "",
+	/*L0 88*/	"", "", "", "", "", "", "", "",
+	/*M0 96*/	"", "", "", "", "", "", "", "",
+	/*N0 104*/	"", "", "", "",
+	/*N4 108*/	"POST_COMPLETE", "ESR1_GPIO_AST_SPISEL", "", "",
+	/*O0 112*/	"", "", "", "", "", "", "", "",
+	/*P0 120*/	"ID_BUTTON", "ID_OUT", "POWER_BUTTON", "POWER_OUT",
+	/*P4 124*/	"RESET_BUTTON", "RESET_OUT", "", "HEARTBEAT",
+	/*Q0 128*/	"", "", "", "", "", "", "", "",
+	/*R0 136*/	"", "", "", "", "", "", "", "",
+	/*S0 144*/	"", "", "", "", "", "", "", "",
+	/*T0 152*/	"", "", "", "", "", "", "", "",
+	/*U0 160*/	"", "", "", "", "", "", "", "",
+	/*V0 168*/	"", "", "", "", "", "", "", "",
+	/*W0 176*/	"", "", "", "", "", "", "", "",
+	/*X0 184*/	"", "", "", "", "", "", "", "",
+	/*Y0 192*/	"", "", "", "", "", "", "", "",
+	/*Z0 200*/	"", "", "", "", "", "", "", "";
+};
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v6 1/2] dt-bindings: arm: aspeed: add ASUS X4TF board

[Krzysztof Kozlowski]

On 26/03/2024 11:35, Kelly Hung wrote:
> Document the new compatibles used on ASUS X4TF.
> 
> Signed-off-by: Kelly Hung <Kelly_Hung@asus.com>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Reviewed-by: Rob Herring <robh@kernel.org>

Where did it happen? Where did you receive this tag? Please provide link
to lore.


> Reviewed-by: Zev Weiss <zweiss@equinix.com>

Where did it happen? Where did you receive this tag? Please provide link
to lore.



Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v6 2/2] ARM: dts: aspeed: x4tf: Add dts for asus x4tf project

[Krzysztof Kozlowski]

On 26/03/2024 11:35, Kelly Hung wrote:
> Base on aspeed-g6.dtsi and can boot into BMC console.
> 
> Signed-off-by: Kelly Hung <Kelly_Hung@asus.com>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

That's not true.

Please provide a link to lore.kernel.org which will prove that you
received this tag.

> Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>

Please provide a link to lore.kernel.org which will prove that you
received this tag.

Did you read the documentation I was sharing with you?

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v6 1/2] dt-bindings: arm: aspeed: add ASUS X4TF board

[Conor Dooley]

[-- Attachment #1.1: Type: text/plain, Size: 946 bytes --]

On Tue, Mar 26, 2024 at 12:36:50PM +0100, Krzysztof Kozlowski wrote:
> On 26/03/2024 11:35, Kelly Hung wrote:
> > Document the new compatibles used on ASUS X4TF.
> > 
> > Signed-off-by: Kelly Hung <Kelly_Hung@asus.com>
> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> > Reviewed-by: Rob Herring <robh@kernel.org>
> 
> Where did it happen? Where did you receive this tag? Please provide link
> to lore.

Robh's bot sent two reports, but I do not see a tag:
https://lore.kernel.org/all/?q=c%3AKelly_Hung%40asus.com+f%3Arobh

> > Reviewed-by: Zev Weiss <zweiss@equinix.com>
> 
> Where did it happen? Where did you receive this tag? Please provide link
> to lore.

Zev seems to have left a comment on this, but not provided a tag:
https://lore.kernel.org/all/20240223220115.GB9299@packtop/

Kelly, it is important that you do not add tags unless someone gives
them to you explicitly.

Thanks,
Conor.

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v6 0/2] Add Reviewed-by and Acked-by tags

[Andrew Jeffery]

Hi Kelly,

On Tue, 2024-03-26 at 18:35 +0800, Kelly Hung wrote:
> There are no changes to the Patch file, just the reviewed and acked tags are added.
> PATCH v5 has been merged into the next branch.

As others have said, please don't add tags that have not been
explicitly given for your patches.

Further, if a patch has been added to any upstream "next" branches it's
not necessary to resend the patches beyond that point, unless there are
errors that need correcting.

Joel had added an earlier revision of your patches to a branch of
candidate patches to upstream, and I've updated those in my own that
I'm maintaining while he's on leave. I'd also added your patches to the
OpenBMC kernel tree as a consequence, but you shouldn't apply tags to
your upstream patches that other people didn't provide you on that
basis.

As for the concerns reported by Rob's bot, I've got a series that
cleans up many of them. I'm working to find time to send them out.
Hopefully these help reduce the noise in the future.

Andrew


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v6 1/2] dt-bindings: arm: aspeed: add ASUS X4TF board

[Andrew Jeffery]

On Tue, 2024-03-26 at 18:35 +0800, Kelly Hung wrote:
> Document the new compatibles used on ASUS X4TF.
> 
> Signed-off-by: Kelly Hung <Kelly_Hung@asus.com>

In addition to the concerns of others, your author email is not the
same as your SoB email. checkpatch warns:

```
WARNING: From:/Signed-off-by: email address mismatch: 'From: Kelly Hung
<ppighouse@gmail.com>' != 'Signed-off-by: Kelly Hung
<Kelly_Hung@asus.com>'

total: 0 errors, 1 warnings, 7 lines checked

NOTE: For some of the reported defects, checkpatch may be able to
      mechanically convert to the typical style using --fix or --fix-
inplace.

Commit bb035db4c70a ("dt-bindings: arm: aspeed: add ASUS X4TF board")
has style problems, please review.

NOTE: If any of the errors are false positives, please report
      them to the maintainer, see CHECKPATCH in MAINTAINERS.
```

Please fix this issue for both patches in the series and resend.

Thanks,

Andrew

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel