Re: [PATCH v3 9/9] arm64: dts: ti: Add support for J742S2 EVM board

[Nishanth Menon <nm@ti.com>]

On 15:11-20240807, Beleswar Prasad Padhi wrote:
> Hi Manorit,
> 
> On 31/07/24 22:40, Manorit Chawdhry wrote:
> > J742S2 EVM board is designed for TI J742S2 SoC. It supports the following
> > interfaces:
> > * 16 GB DDR4 RAM
> > * x2 Gigabit Ethernet interfaces capable of working in Switch and MAC mode
> > * x1 Input Audio Jack, x1 Output Audio Jack
> > * x1 USB2.0 Hub with two Type A host and x1 USB 3.1 Type-C Port
> > * x1 4L PCIe connector
> > * x1 UHS-1 capable micro-SD card slot
> > * 512 Mbit OSPI flash, 1 Gbit Octal NAND flash, 512 Mbit QSPI flash,
> >    UFS flash.
> > * x6 UART through UART-USB bridge
> > * XDS110 for onboard JTAG debug using USB
> > * Temperature sensors, user push buttons and LEDs
> > * x1 GESI expander, x2 Display connector
> > * x1 15-pin CSI header
> > * x6 MCAN instances
> > 
> > Link: https://www.ti.com/lit/ug/sprujd8/sprujd8.pdf (EVM user guide)
> > Link: https://www.ti.com/lit/zip/SPAC001 (Schematics)
> > Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
> 
> 
> For series,
> Reviewed-By: Beleswar Padhi <b-padhi@ti.com>

Please follow the convention - if you are acking the series, reply to
the cover-letter such that tools like b4 can pick it up, else this ack
belongs to the current patch.

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D