From: Vladimir Oltean <olteanv@gmail.com>
To: Furong Xu <0x1207@gmail.com>, Serge Semin <fancer.lancer@gmail.com>
Cc: netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Andrew Lunn <andrew@lunn.ch>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Jose Abreu <joabreu@synopsys.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
xfr@outlook.com
Subject: Re: [PATCH net-next v1 0/5] net: stmmac: Refactor FPE as a separate module
Date: Thu, 17 Oct 2024 20:06:52 +0300 [thread overview]
Message-ID: <20241017170652.jtg2abm532sp4uah@skbuf> (raw)
In-Reply-To: <cover.1728980110.git.0x1207@gmail.com>
On Tue, Oct 15, 2024 at 05:09:21PM +0800, Furong Xu wrote:
> Refactor FPE implementation by moving common code for DWMAC4 and
> DWXGMAC into a separate FPE module.
>
> FPE implementation for DWMAC4 and DWXGMAC differs only for:
> 1) Offset address of MAC_FPE_CTRL_STS and MTL_FPE_CTRL_STS
> 2) FPRQ(Frame Preemption Residue Queue) field in MAC_RxQ_Ctrl1
>
> Tested on DWMAC CORE 5.20a and DWXGMAC CORE 3.20a
>
> Furong Xu (5):
> net: stmmac: Introduce separate files for FPE implementation
> net: stmmac: Introduce stmmac_fpe_ops for gmac4 and xgmac
> net: stmmac: Rework marco definitions for gmac4 and xgmac
> net: stmmac: xgmac: Rename XGMAC_RQ to XGMAC_FPRQ
> net: stmmac: xgmac: Complete FPE support
>
> drivers/net/ethernet/stmicro/stmmac/Makefile | 2 +-
> drivers/net/ethernet/stmicro/stmmac/common.h | 1 +
> .../net/ethernet/stmicro/stmmac/dwmac4_core.c | 12 -
> drivers/net/ethernet/stmicro/stmmac/dwmac5.c | 150 ------
> drivers/net/ethernet/stmicro/stmmac/dwmac5.h | 26 --
> .../net/ethernet/stmicro/stmmac/dwxgmac2.h | 7 +-
> .../ethernet/stmicro/stmmac/dwxgmac2_core.c | 28 --
> drivers/net/ethernet/stmicro/stmmac/hwif.c | 7 +
> drivers/net/ethernet/stmicro/stmmac/hwif.h | 54 ++-
> drivers/net/ethernet/stmicro/stmmac/stmmac.h | 10 -
> .../ethernet/stmicro/stmmac/stmmac_ethtool.c | 2 +-
> .../net/ethernet/stmicro/stmmac/stmmac_fpe.c | 442 ++++++++++++++++++
> .../net/ethernet/stmicro/stmmac/stmmac_fpe.h | 38 ++
> .../net/ethernet/stmicro/stmmac/stmmac_main.c | 149 +-----
> .../net/ethernet/stmicro/stmmac/stmmac_tc.c | 4 +-
> 15 files changed, 527 insertions(+), 405 deletions(-)
> create mode 100644 drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c
> create mode 100644 drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.h
>
> --
> 2.34.1
>
Sergey Syomin is the one who originally requested the splitting of FPE
into a separate module.
https://lore.kernel.org/netdev/max7qd6eafatuse22ymmbfhumrctvf2lenwzhn6sxsm5ugebh6@udblqrtlblbf/
I guess you could CC him on next patch revisions, maybe he can take a
look and see if it is what he had in mind. I don't care so much about
internal stmmac organization stuff.
next prev parent reply other threads:[~2024-10-17 17:14 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-15 9:09 [PATCH net-next v1 0/5] net: stmmac: Refactor FPE as a separate module Furong Xu
2024-10-15 9:09 ` [PATCH net-next v1 1/5] net: stmmac: Introduce separate files for FPE implementation Furong Xu
2024-10-17 12:39 ` Simon Horman
2024-10-15 9:09 ` [PATCH net-next v1 2/5] net: stmmac: Introduce stmmac_fpe_ops for gmac4 and xgmac Furong Xu
2024-10-17 12:39 ` Simon Horman
2024-10-15 9:09 ` [PATCH net-next v1 3/5] net: stmmac: Rework marco definitions " Furong Xu
2024-10-17 12:39 ` Simon Horman
2024-10-17 17:16 ` Vladimir Oltean
2024-10-15 9:09 ` [PATCH net-next v1 4/5] net: stmmac: xgmac: Rename XGMAC_RQ to XGMAC_FPRQ Furong Xu
2024-10-17 12:40 ` Simon Horman
2024-10-17 12:41 ` Simon Horman
2024-10-17 17:18 ` Vladimir Oltean
2024-10-18 19:16 ` Simon Horman
2024-10-15 9:09 ` [PATCH net-next v1 5/5] net: stmmac: xgmac: Complete FPE support Furong Xu
2024-10-17 12:29 ` Simon Horman
2024-10-17 17:31 ` Vladimir Oltean
2024-10-17 17:06 ` Vladimir Oltean [this message]
2024-10-18 1:33 ` [PATCH net-next v1 0/5] net: stmmac: Refactor FPE as a separate module Furong Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241017170652.jtg2abm532sp4uah@skbuf \
--to=olteanv@gmail.com \
--cc=0x1207@gmail.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=fancer.lancer@gmail.com \
--cc=joabreu@synopsys.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=xfr@outlook.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox