[PATCH 0/3 v3] arm64: dts: rockchip: Add Orange Pi 5 Max board

[PATCH 0/3 v3] arm64: dts: rockchip: Add Orange Pi 5 Max board

[Jimmy Hon]

Changes in v3:
- Refactor to share common include with Orange Pi 5 Plus

Changes in v2:
- squashed commits together for initial board file

Link to v1: https://lore.kernel.org/linux-rockchip/20241026100310.52679-1-honyuenkwun@gmail.com/

[PATCH 1/3 v3] arm64: dts: rockchip: refactor common rk3588-orangepi-5.dtsi

[Jimmy Hon]

for Orange Pi 5 Plus/Max/Ultra and AI Max
---
 .../dts/rockchip/rk3588-orangepi-5-plus.dts   | 859 ++----------------
 ...gepi-5-plus.dts => rk3588-orangepi-5.dtsi} | 155 +---
 2 files changed, 69 insertions(+), 945 deletions(-)
 copy arch/arm64/boot/dts/rockchip/{rk3588-orangepi-5-plus.dts => rk3588-orangepi-5.dtsi} (83%)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
index db18bcd310b1..4aff61e83a5f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
@@ -6,66 +6,14 @@
 /dts-v1/;
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/rockchip.h>
-#include <dt-bindings/soc/rockchip,vop2.h>
 #include <dt-bindings/usb/pd.h>
-#include "rk3588.dtsi"
+#include "rk3588-orangepi-5.dtsi"
 
 / {
 	model = "Xunlong Orange Pi 5 Plus";
 	compatible = "xunlong,orangepi-5-plus", "rockchip,rk3588";
 
-	aliases {
-		mmc0 = &sdhci;
-		mmc1 = &sdmmc;
-	};
-
-	chosen {
-		stdout-path = "serial2:1500000n8";
-	};
-
-	adc-keys-0 {
-		compatible = "adc-keys";
-		io-channels = <&saradc 0>;
-		io-channel-names = "buttons";
-		keyup-threshold-microvolt = <1800000>;
-		poll-interval = <100>;
-
-		button-maskrom {
-			label = "Mask Rom";
-			linux,code = <KEY_SETUP>;
-			press-threshold-microvolt = <2000>;
-		};
-	};
-
-	adc-keys-1 {
-		compatible = "adc-keys";
-		io-channels = <&saradc 1>;
-		io-channel-names = "buttons";
-		keyup-threshold-microvolt = <1800000>;
-		poll-interval = <100>;
-
-		button-recovery {
-			label = "Recovery";
-			linux,code = <KEY_VENDOR>;
-			press-threshold-microvolt = <2000>;
-		};
-	};
-
-	speaker_amp: speaker-audio-amplifier {
-		compatible = "simple-audio-amplifier";
-		enable-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
-		sound-name-prefix = "Speaker Amp";
-	};
-
-	headphone_amp: headphones-audio-amplifier {
-		compatible = "simple-audio-amplifier";
-		enable-gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
-		sound-name-prefix = "Headphones Amp";
-	};
-
 	ir-receiver {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
@@ -73,356 +21,84 @@ ir-receiver {
 		pinctrl-0 = <&ir_receiver_pin>;
 	};
 
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&blue_led_pin>;
-
-		led {
-			color = <LED_COLOR_ID_BLUE>;
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <1>;
-			gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	hdmi0-con {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi0_con_in: endpoint {
-				remote-endpoint = <&hdmi0_out_con>;
-			};
-		};
-	};
-
-	fan: pwm-fan {
-		compatible = "pwm-fan";
-		cooling-levels = <0 70 75 80 100>;
-		fan-supply = <&vcc5v0_sys>;
-		pwms = <&pwm3 0 50000 0>;
-		#cooling-cells = <2>;
-	};
-
-	pwm-leds {
-		compatible = "pwm-leds";
-
-		led {
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <2>;
-			max-brightness = <255>;
-			pwms = <&pwm2 0 25000 0>;
-		};
-	};
-
 	rfkill {
 		compatible = "rfkill-gpio";
 		label = "rfkill-pcie-wlan";
 		radio-type = "wlan";
 		shutdown-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
 	};
-
-	sound {
-		compatible = "simple-audio-card";
-		pinctrl-names = "default";
-		pinctrl-0 = <&hp_detect>;
-		simple-audio-card,name = "Analog";
-		simple-audio-card,aux-devs = <&speaker_amp>, <&headphone_amp>;
-		simple-audio-card,format = "i2s";
-		simple-audio-card,mclk-fs = <256>;
-		simple-audio-card,hp-det-gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_LOW>;
-		simple-audio-card,bitclock-master = <&daicpu>;
-		simple-audio-card,frame-master = <&daicpu>;
-		/*TODO: SARADC_IN3 is used as MIC detection / key input */
-
-		simple-audio-card,widgets =
-			"Microphone", "Onboard Microphone",
-			"Microphone", "Microphone Jack",
-			"Speaker", "Speaker",
-			"Headphone", "Headphones";
-
-		simple-audio-card,routing =
-			"Headphones", "LOUT1",
-			"Headphones", "ROUT1",
-			"Speaker", "LOUT2",
-			"Speaker", "ROUT2",
-
-			"Headphones", "Headphones Amp OUTL",
-			"Headphones", "Headphones Amp OUTR",
-			"Headphones Amp INL", "LOUT1",
-			"Headphones Amp INR", "ROUT1",
-
-			"Speaker", "Speaker Amp OUTL",
-			"Speaker", "Speaker Amp OUTR",
-			"Speaker Amp INL", "LOUT2",
-			"Speaker Amp INR", "ROUT2",
-
-			/* single ended signal to LINPUT1 */
-			"LINPUT1", "Microphone Jack",
-			"RINPUT1", "Microphone Jack",
-			/* differential signal */
-			"LINPUT2", "Onboard Microphone",
-			"RINPUT2", "Onboard Microphone";
-
-		daicpu: simple-audio-card,cpu {
-			sound-dai = <&i2s0_8ch>;
-			system-clock-frequency = <12288000>;
-		};
-
-		daicodec: simple-audio-card,codec {
-			sound-dai = <&es8388>;
-			system-clock-frequency = <12288000>;
-		};
-	};
-
-	vcc3v3_pcie30: regulator-vcc3v3-pcie30 {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>;
-		regulator-name = "vcc3v3_pcie30";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <5000>;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	vcc3v3_pcie_eth: regulator-vcc3v3-pcie-eth {
-		compatible = "regulator-fixed";
-		gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
-		regulator-name = "vcc3v3_pcie_eth";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <50000>;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	vcc3v3_wf: regulator-vcc3v3-wf {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;
-		regulator-name = "vcc3v3_wf";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <50000>;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	vcc5v0_sys: regulator-vcc5v0-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	vcc5v0_usb20: regulator-vcc5v0-usb20 {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_usb20_en>;
-		regulator-name = "vcc5v0_usb20";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc5v0_sys>;
-	};
-};
-
-&combphy0_ps {
-	status = "okay";
-};
-
-&combphy1_ps {
-	status = "okay";
 };
 
-&combphy2_psu {
+&speaker_amp {
+	enable-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
-&cpu_b0 {
-	cpu-supply = <&vdd_cpu_big0_s0>;
-};
-
-&cpu_b1 {
-	cpu-supply = <&vdd_cpu_big0_s0>;
-};
-
-&cpu_b2 {
-	cpu-supply = <&vdd_cpu_big1_s0>;
-};
-
-&cpu_b3 {
-	cpu-supply = <&vdd_cpu_big1_s0>;
-};
-
-&cpu_l0 {
-	cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&cpu_l1 {
-	cpu-supply = <&vdd_cpu_lit_s0>;
+&headphone_amp {
+	enable-gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
 };
 
-&cpu_l2 {
-	cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&cpu_l3 {
-	cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&gpu {
-	mali-supply = <&vdd_gpu_s0>;
-	status = "okay";
-};
-
-&hdmi0 {
-	status = "okay";
-};
-
-&hdmi0_in {
-	hdmi0_in_vp0: endpoint {
-		remote-endpoint = <&vp0_out_hdmi0>;
-	};
-};
-
-&hdmi0_out {
-	hdmi0_out_con: endpoint {
-		remote-endpoint = <&hdmi0_con_in>;
-	};
-};
-
-&hdptxphy_hdmi0 {
-	status = "okay";
-};
-
-&i2c0 {
+&analog_sound {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0m2_xfer>;
-	status = "okay";
-
-	vdd_cpu_big0_s0: regulator@42 {
-		compatible = "rockchip,rk8602";
-		reg = <0x42>;
-		fcs,suspend-voltage-selector = <1>;
-		regulator-name = "vdd_cpu_big0_s0";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <550000>;
-		regulator-max-microvolt = <1050000>;
-		regulator-ramp-delay = <2300>;
-		vin-supply = <&vcc5v0_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-
-	vdd_cpu_big1_s0: regulator@43 {
-		compatible = "rockchip,rk8603", "rockchip,rk8602";
-		reg = <0x43>;
-		fcs,suspend-voltage-selector = <1>;
-		regulator-name = "vdd_cpu_big1_s0";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <550000>;
-		regulator-max-microvolt = <1050000>;
-		regulator-ramp-delay = <2300>;
-		vin-supply = <&vcc5v0_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
+	pinctrl-0 = <&hp_detect>;
+	simple-audio-card,aux-devs = <&speaker_amp>, <&headphone_amp>;
+	simple-audio-card,hp-det-gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_LOW>;
+	simple-audio-card,widgets =
+		"Microphone", "Onboard Microphone",
+		"Microphone", "Microphone Jack",
+		"Speaker", "Speaker",
+		"Headphone", "Headphones";
+
+	simple-audio-card,routing =
+		"Headphones", "LOUT1",
+		"Headphones", "ROUT1",
+		"Speaker", "LOUT2",
+		"Speaker", "ROUT2",
+
+		"Headphones", "Headphones Amp OUTL",
+		"Headphones", "Headphones Amp OUTR",
+		"Headphones Amp INL", "LOUT1",
+		"Headphones Amp INR", "ROUT1",
+
+		"Speaker", "Speaker Amp OUTL",
+		"Speaker", "Speaker Amp OUTR",
+		"Speaker Amp INL", "LOUT2",
+		"Speaker Amp INR", "ROUT2",
+
+		/* single ended signal to LINPUT1 */
+		"LINPUT1", "Microphone Jack",
+		"RINPUT1", "Microphone Jack",
+		/* differential signal */
+		"LINPUT2", "Onboard Microphone",
+		"RINPUT2", "Onboard Microphone";
 };
 
-&i2c6 {
-	clock-frequency = <400000>;
+&combphy0_ps {
 	status = "okay";
-
-	hym8563: rtc@51 {
-		compatible = "haoyu,hym8563";
-		reg = <0x51>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
-		#clock-cells = <0>;
-		clock-output-names = "hym8563";
-		pinctrl-names = "default";
-		pinctrl-0 = <&hym8563_int>;
-		wakeup-source;
-	};
 };
 
-&i2c7 {
+&combphy1_ps {
 	status = "okay";
+};
 
-	/* PLDO2 vcca 1.8V, BUCK8 gated by PLDO2 being enabled */
-	es8388: audio-codec@11 {
-		compatible = "everest,es8388";
-		reg = <0x11>;
-		clocks = <&cru I2S0_8CH_MCLKOUT>;
-		clock-names = "mclk";
-		AVDD-supply = <&vcc_1v8_s0>;
-		DVDD-supply = <&vcc_1v8_s0>;
-		HPVDD-supply = <&vcc_3v3_s0>;
-		PVDD-supply = <&vcc_3v3_s0>;
-		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
-		assigned-clock-rates = <12288000>;
-		#sound-dai-cells = <0>;
-	};
+&fan {
+	pwms = <&pwm3 0 50000 0>;
 };
 
-&i2s0_8ch {
+&hym8563 {
+	interrupt-parent = <&gpio0>;
+	interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2s0_lrck
-		     &i2s0_mclk
-		     &i2s0_sclk
-		     &i2s0_sdi0
-		     &i2s0_sdo0>;
-	status = "okay";
+	pinctrl-0 = <&hym8563_int>;
 };
 
-&i2s2_2ch {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2s2m0_lrck
-		     &i2s2m0_sclk
-		     &i2s2m0_sdi
-		     &i2s2m0_sdo>;
+&led_blue_gpio {
+	gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
-&package_thermal {
-	polling-delay = <1000>;
-
-	cooling-maps {
-		map0 {
-			trip = <&package_fan0>;
-			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
-		};
-
-		map1 {
-			trip = <&package_fan1>;
-			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
-		};
-	};
-
-	trips {
-		package_fan0: package-fan0 {
-			temperature = <55000>;
-			hysteresis = <2000>;
-			type = "active";
-		};
-
-		package_fan1: package-fan1 {
-			temperature = <65000>;
-			hysteresis = <2000>;
-			type = "active";
-		};
-	};
+&led_green_pwm {
+	pwms = <&pwm2 0 25000 0>;
 };
 
 /* phy1 - M.KEY socket */
@@ -446,16 +122,6 @@ &pcie2x1l2 {
 	status = "okay";
 };
 
-&pcie30phy {
-	status = "okay";
-};
-
-&pcie3x4 {
-	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
-	vpcie3v3-supply = <&vcc3v3_pcie30>;
-	status = "okay";
-};
-
 &pinctrl {
 	hym8563 {
 		hym8563_int: hym8563-int {
@@ -499,405 +165,13 @@ &pwm3 {
 	status = "okay";
 };
 
-&saradc {
-	vref-supply = <&vcc_1v8_s0>;
-	status = "okay";
-};
-
-&sdhci {
-	bus-width = <8>;
-	no-sdio;
-	no-sd;
-	non-removable;
-	max-frequency = <200000000>;
-	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
-	status = "okay";
-};
-
-&sdmmc {
-	bus-width = <4>;
-	cap-sd-highspeed;
-	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
-	disable-wp;
-	max-frequency = <150000000>;
-	no-sdio;
-	no-mmc;
-	sd-uhs-sdr104;
-	vmmc-supply = <&vcc_3v3_s3>;
-	vqmmc-supply = <&vccio_sd_s0>;
+&recovery_button {
 	status = "okay";
 };
 
 &sfc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&fspim1_pins>;
-	status = "okay";
-
-	spi_flash: flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0x0>;
-		spi-max-frequency = <100000000>;
-		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <1>;
-	};
-};
-
-&spi2 {
-	assigned-clocks = <&cru CLK_SPI2>;
-	assigned-clock-rates = <200000000>;
-	num-cs = <1>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
-	status = "okay";
-
-	pmic@0 {
-		compatible = "rockchip,rk806";
-		reg = <0x0>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
-			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
-		spi-max-frequency = <1000000>;
-		system-power-controller;
-
-		vcc1-supply = <&vcc5v0_sys>;
-		vcc2-supply = <&vcc5v0_sys>;
-		vcc3-supply = <&vcc5v0_sys>;
-		vcc4-supply = <&vcc5v0_sys>;
-		vcc5-supply = <&vcc5v0_sys>;
-		vcc6-supply = <&vcc5v0_sys>;
-		vcc7-supply = <&vcc5v0_sys>;
-		vcc8-supply = <&vcc5v0_sys>;
-		vcc9-supply = <&vcc5v0_sys>;
-		vcc10-supply = <&vcc5v0_sys>;
-		vcc11-supply = <&vcc_2v0_pldo_s3>;
-		vcc12-supply = <&vcc5v0_sys>;
-		vcc13-supply = <&vdd2_ddr_s3>;
-		vcc14-supply = <&vdd2_ddr_s3>;
-		vcca-supply = <&vcc5v0_sys>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		rk806_dvs1_null: dvs1-null-pins {
-			pins = "gpio_pwrctrl1";
-			function = "pin_fun0";
-		};
-
-		rk806_dvs2_null: dvs2-null-pins {
-			pins = "gpio_pwrctrl2";
-			function = "pin_fun0";
-		};
-
-		rk806_dvs3_null: dvs3-null-pins {
-			pins = "gpio_pwrctrl3";
-			function = "pin_fun0";
-		};
-
-		regulators {
-			vdd_gpu_s0: dcdc-reg1 {
-				regulator-name = "vdd_gpu_s0";
-				regulator-boot-on;
-				regulator-enable-ramp-delay = <400>;
-				regulator-min-microvolt = <550000>;
-				regulator-max-microvolt = <950000>;
-				regulator-ramp-delay = <12500>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_cpu_lit_s0: dcdc-reg2 {
-				regulator-name = "vdd_cpu_lit_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <550000>;
-				regulator-max-microvolt = <950000>;
-				regulator-ramp-delay = <12500>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_log_s0: dcdc-reg3 {
-				regulator-name = "vdd_log_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <675000>;
-				regulator-max-microvolt = <825000>;
-				regulator-ramp-delay = <12500>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <750000>;
-				};
-			};
-
-			vdd_vdenc_s0: dcdc-reg4 {
-				regulator-name = "vdd_vdenc_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <550000>;
-				regulator-max-microvolt = <825000>;
-				regulator-ramp-delay = <12500>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_ddr_s0: dcdc-reg5 {
-				regulator-name = "vdd_ddr_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <675000>;
-				regulator-max-microvolt = <900000>;
-				regulator-ramp-delay = <12500>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <850000>;
-				};
-			};
-
-			vdd2_ddr_s3: dcdc-reg6 {
-				regulator-name = "vdd2_ddr_s3";
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_2v0_pldo_s3: dcdc-reg7 {
-				regulator-name = "vdd_2v0_pldo_s3";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <2000000>;
-				regulator-max-microvolt = <2000000>;
-				regulator-ramp-delay = <12500>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <2000000>;
-				};
-			};
-
-			vcc_3v3_s3: dcdc-reg8 {
-				regulator-name = "vcc_3v3_s3";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vddq_ddr_s0: dcdc-reg9 {
-				regulator-name = "vddq_ddr_s0";
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_1v8_s3: dcdc-reg10 {
-				regulator-name = "vcc_1v8_s3";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			avcc_1v8_s0: pldo-reg1 {
-				regulator-name = "avcc_1v8_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			/* shorted to avcc_1v8_s0 on the board */
-			vcc_1v8_s0: pldo-reg2 {
-				regulator-name = "vcc_1v8_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			avdd_1v2_s0: pldo-reg3 {
-				regulator-name = "avdd_1v2_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_3v3_s0: pldo-reg4 {
-				regulator-name = "vcc_3v3_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-ramp-delay = <12500>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vccio_sd_s0: pldo-reg5 {
-				regulator-name = "vccio_sd_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-ramp-delay = <12500>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			pldo6_s3: pldo-reg6 {
-				regulator-name = "pldo6_s3";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vdd_0v75_s3: nldo-reg1 {
-				regulator-name = "vdd_0v75_s3";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <750000>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <750000>;
-				};
-			};
-
-			vdd_ddr_pll_s0: nldo-reg2 {
-				regulator-name = "vdd_ddr_pll_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <850000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <850000>;
-				};
-			};
-
-			avdd_0v75_s0: nldo-reg3 {
-				regulator-name = "avdd_0v75_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				/*
-				 * The schematic mentions that actual setting
-				 * should be 0.8375V. RK3588 datasheet specifies
-				 * maximum as 0.825V. So we set datasheet max
-				 * here.
-				 */
-				regulator-min-microvolt = <825000>;
-				regulator-max-microvolt = <825000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_0v85_s0: nldo-reg4 {
-				regulator-name = "vdd_0v85_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <850000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_0v75_s0: nldo-reg5 {
-				regulator-name = "vdd_0v75_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <750000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-		};
-	};
-};
-
-&tsadc {
-	status = "okay";
-};
-
-&u2phy2 {
-	status = "okay";
-};
-
-&u2phy3 {
-	status = "okay";
-};
-
-&u2phy2_host {
-	phy-supply = <&vcc5v0_usb20>;
-	status = "okay";
-};
-
-&u2phy3_host {
-	phy-supply = <&vcc5v0_usb20>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-0 = <&uart2m0_xfer>;
-	status = "okay";
 };
 
 &uart9 {
@@ -905,33 +179,16 @@ &uart9 {
 	status = "okay";
 };
 
-&usb_host0_ehci {
-	status = "okay";
+&vcc3v3_pcie_eth {
+	gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
 };
 
-&usb_host0_ohci {
+&vcc3v3_wf {
 	status = "okay";
 };
 
-&usb_host1_ehci {
-	status = "okay";
-};
-
-&usb_host1_ohci {
-	status = "okay";
-};
-
-&vop_mmu {
-	status = "okay";
-};
-
-&vop {
-	status = "okay";
-};
-
-&vp0 {
-	vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
-		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
-		remote-endpoint = <&hdmi0_in_vp0>;
-	};
+&vcc5v0_usb20 {
+	gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc5v0_usb20_en>;
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi
similarity index 83%
copy from arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
copy to arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi
index db18bcd310b1..3c6e1321f13f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi
@@ -14,9 +14,6 @@
 #include "rk3588.dtsi"
 
 / {
-	model = "Xunlong Orange Pi 5 Plus";
-	compatible = "xunlong,orangepi-5-plus", "rockchip,rk3588";
-
 	aliases {
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
@@ -40,12 +37,13 @@ button-maskrom {
 		};
 	};
 
-	adc-keys-1 {
+	recovery_button: adc-keys-1 {
 		compatible = "adc-keys";
 		io-channels = <&saradc 1>;
 		io-channel-names = "buttons";
 		keyup-threshold-microvolt = <1800000>;
 		poll-interval = <100>;
+		status = "disabled";
 
 		button-recovery {
 			label = "Recovery";
@@ -56,33 +54,23 @@ button-recovery {
 
 	speaker_amp: speaker-audio-amplifier {
 		compatible = "simple-audio-amplifier";
-		enable-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
 		sound-name-prefix = "Speaker Amp";
+		status = "disabled";
 	};
 
 	headphone_amp: headphones-audio-amplifier {
 		compatible = "simple-audio-amplifier";
-		enable-gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
 		sound-name-prefix = "Headphones Amp";
 	};
 
-	ir-receiver {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ir_receiver_pin>;
-	};
-
 	gpio-leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&blue_led_pin>;
 
-		led {
+		led_blue_gpio: led {
 			color = <LED_COLOR_ID_BLUE>;
 			function = LED_FUNCTION_INDICATOR;
 			function-enumerator = <1>;
-			gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;
+			status = "disabled";
 		};
 	};
 
@@ -101,19 +89,17 @@ fan: pwm-fan {
 		compatible = "pwm-fan";
 		cooling-levels = <0 70 75 80 100>;
 		fan-supply = <&vcc5v0_sys>;
-		pwms = <&pwm3 0 50000 0>;
 		#cooling-cells = <2>;
 	};
 
 	pwm-leds {
 		compatible = "pwm-leds";
 
-		led {
+		led_green_pwm: led-2 {
 			color = <LED_COLOR_ID_GREEN>;
 			function = LED_FUNCTION_INDICATOR;
 			function-enumerator = <2>;
 			max-brightness = <255>;
-			pwms = <&pwm2 0 25000 0>;
 		};
 	};
 
@@ -124,48 +110,15 @@ rfkill {
 		shutdown-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
 	};
 
-	sound {
+	analog_sound: sound {
 		compatible = "simple-audio-card";
-		pinctrl-names = "default";
-		pinctrl-0 = <&hp_detect>;
 		simple-audio-card,name = "Analog";
-		simple-audio-card,aux-devs = <&speaker_amp>, <&headphone_amp>;
 		simple-audio-card,format = "i2s";
 		simple-audio-card,mclk-fs = <256>;
-		simple-audio-card,hp-det-gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_LOW>;
 		simple-audio-card,bitclock-master = <&daicpu>;
 		simple-audio-card,frame-master = <&daicpu>;
 		/*TODO: SARADC_IN3 is used as MIC detection / key input */
 
-		simple-audio-card,widgets =
-			"Microphone", "Onboard Microphone",
-			"Microphone", "Microphone Jack",
-			"Speaker", "Speaker",
-			"Headphone", "Headphones";
-
-		simple-audio-card,routing =
-			"Headphones", "LOUT1",
-			"Headphones", "ROUT1",
-			"Speaker", "LOUT2",
-			"Speaker", "ROUT2",
-
-			"Headphones", "Headphones Amp OUTL",
-			"Headphones", "Headphones Amp OUTR",
-			"Headphones Amp INL", "LOUT1",
-			"Headphones Amp INR", "ROUT1",
-
-			"Speaker", "Speaker Amp OUTL",
-			"Speaker", "Speaker Amp OUTR",
-			"Speaker Amp INL", "LOUT2",
-			"Speaker Amp INR", "ROUT2",
-
-			/* single ended signal to LINPUT1 */
-			"LINPUT1", "Microphone Jack",
-			"RINPUT1", "Microphone Jack",
-			/* differential signal */
-			"LINPUT2", "Onboard Microphone",
-			"RINPUT2", "Onboard Microphone";
-
 		daicpu: simple-audio-card,cpu {
 			sound-dai = <&i2s0_8ch>;
 			system-clock-frequency = <12288000>;
@@ -190,12 +143,11 @@ vcc3v3_pcie30: regulator-vcc3v3-pcie30 {
 
 	vcc3v3_pcie_eth: regulator-vcc3v3-pcie-eth {
 		compatible = "regulator-fixed";
-		gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
 		regulator-name = "vcc3v3_pcie_eth";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		startup-delay-us = <50000>;
-		vin-supply = <&vcc5v0_sys>;
+		vin-supply = <&vcc_3v3_s3>;
 	};
 
 	vcc3v3_wf: regulator-vcc3v3-wf {
@@ -207,6 +159,7 @@ vcc3v3_wf: regulator-vcc3v3-wf {
 		regulator-max-microvolt = <3300000>;
 		startup-delay-us = <50000>;
 		vin-supply = <&vcc5v0_sys>;
+		status = "disabled";
 	};
 
 	vcc5v0_sys: regulator-vcc5v0-sys {
@@ -221,9 +174,6 @@ vcc5v0_sys: regulator-vcc5v0-sys {
 	vcc5v0_usb20: regulator-vcc5v0-usb20 {
 		compatible = "regulator-fixed";
 		enable-active-high;
-		gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_usb20_en>;
 		regulator-name = "vcc5v0_usb20";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
@@ -231,14 +181,6 @@ vcc5v0_usb20: regulator-vcc5v0-usb20 {
 	};
 };
 
-&combphy0_ps {
-	status = "okay";
-};
-
-&combphy1_ps {
-	status = "okay";
-};
-
 &combphy2_psu {
 	status = "okay";
 };
@@ -347,12 +289,8 @@ &i2c6 {
 	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
 		#clock-cells = <0>;
 		clock-output-names = "hym8563";
-		pinctrl-names = "default";
-		pinctrl-0 = <&hym8563_int>;
 		wakeup-source;
 	};
 };
@@ -366,10 +304,10 @@ es8388: audio-codec@11 {
 		reg = <0x11>;
 		clocks = <&cru I2S0_8CH_MCLKOUT>;
 		clock-names = "mclk";
-		AVDD-supply = <&vcc_1v8_s0>;
+		AVDD-supply = <&vcc_3v3_s0>;
 		DVDD-supply = <&vcc_1v8_s0>;
 		HPVDD-supply = <&vcc_3v3_s0>;
-		PVDD-supply = <&vcc_3v3_s0>;
+		PVDD-supply = <&vcc_1v8_s0>;
 		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
 		assigned-clock-rates = <12288000>;
 		#sound-dai-cells = <0>;
@@ -425,27 +363,6 @@ package_fan1: package-fan1 {
 	};
 };
 
-/* phy1 - M.KEY socket */
-&pcie2x1l0 {
-	reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
-	vpcie3v3-supply = <&vcc3v3_wf>;
-	status = "okay";
-};
-
-/* phy2 - right ethernet port */
-&pcie2x1l1 {
-	reset-gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>;
-	vpcie3v3-supply = <&vcc3v3_pcie_eth>;
-	status = "okay";
-};
-
-/* phy0 - left ethernet port */
-&pcie2x1l2 {
-	reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
-	vpcie3v3-supply = <&vcc3v3_pcie_eth>;
-	status = "okay";
-};
-
 &pcie30phy {
 	status = "okay";
 };
@@ -456,49 +373,6 @@ &pcie3x4 {
 	status = "okay";
 };
 
-&pinctrl {
-	hym8563 {
-		hym8563_int: hym8563-int {
-			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	leds {
-		blue_led_pin: blue-led {
-			rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	ir-receiver {
-		ir_receiver_pin: ir-receiver-pin {
-			rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	sound {
-		hp_detect: hp-detect {
-			rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	usb {
-		vcc5v0_usb20_en: vcc5v0-usb20-en {
-			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&pwm2 {
-	pinctrl-0 = <&pwm2m1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-0 = <&pwm3m1_pins>;
-	status = "okay";
-};
-
 &saradc {
 	vref-supply = <&vcc_1v8_s0>;
 	status = "okay";
@@ -530,8 +404,6 @@ &sdmmc {
 };
 
 &sfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&fspim1_pins>;
 	status = "okay";
 
 	spi_flash: flash@0 {
@@ -900,11 +772,6 @@ &uart2 {
 	status = "okay";
 };
 
-&uart9 {
-	pinctrl-0 = <&uart9m0_xfer>;
-	status = "okay";
-};
-
 &usb_host0_ehci {
 	status = "okay";
 };
-- 
2.47.0

[PATCH 2/3 v3] dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Max

[Jimmy Hon]

Add devicetree binding for the Xunlong Orange Pi 5 Max board.

The Orange Pi 5 Max is a single board computer powered by the Rockchip
RK3588 similar to the Orange Pi 5 Plus.

Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
---
 Documentation/devicetree/bindings/arm/rockchip.yaml | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index a5a8f8bb9e48..82fbb22de207 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -1070,9 +1070,11 @@ properties:
           - const: xunlong,orangepi-3b
           - const: rockchip,rk3566
 
-      - description: Xunlong Orange Pi 5 Plus
+      - description: Xunlong Orange Pi 5 Max/Plus
         items:
-          - const: xunlong,orangepi-5-plus
+          - enum:
+              - xunlong,orangepi-5-max
+              - xunlong,orangepi-5-plus
           - const: rockchip,rk3588
 
       - description: Xunlong Orange Pi R1 Plus / LTS
-- 
2.47.0

[PATCH 3/3 v3] arm64: dts: rockchip: Add Orange Pi 5 Max board

[Jimmy Hon]

The RK3588 Single Board Computer includes
- eMMC
- microSD
- UART
- 2 PWM LEDs
- RTC
- RTL8125 network controller on PCIe 2.0x1.
- M.2 M-key connector routed to PCIe 3.0x4
- PWM controlled heat sink fan.
- 2 USB2 ports
- lower USB3 port
- upper USB3 port with OTG capability
- Mali GPU
- SPI NOR flash
- Mask Rom button
- Analog audio using es8388 codec via the headset jack and onboard mic
- HDMI0

the vcc5v0_usb30 regulator shares the same enable gpio pin as the
vcc5v0_usb20 regulator.

Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
---
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../dts/rockchip/rk3588-orangepi-5-max.dts    | 130 ++++++++++++++++++
 .../boot/dts/rockchip/rk3588-orangepi-5.dtsi  |   8 ++
 3 files changed, 139 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 86cc418a2255..83ad11650f0b 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -142,6 +142,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6-lts.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-ok3588-c.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-max.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5-itx.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts
new file mode 100644
index 000000000000..c9f17bb31710
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3588-orangepi-5.dtsi"
+
+/ {
+	model = "Xunlong Orange Pi 5 Max";
+	compatible = "xunlong,orangepi-5-max", "rockchip,rk3588";
+};
+
+&headphone_amp {
+	/* PHONE_CTL */
+	enable-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+};
+
+&analog_sound {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hp_detect>;
+	simple-audio-card,aux-devs = <&headphone_amp>;
+	simple-audio-card,hp-det-gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>;
+
+	simple-audio-card,routing =
+		"Headphones", "LOUT1",
+		"Headphones", "ROUT1",
+		"LINPUT1", "Microphone Jack",
+		"RINPUT1", "Microphone Jack",
+		"LINPUT2", "Onboard Microphone",
+		"RINPUT2", "Onboard Microphone";
+	simple-audio-card,widgets =
+		"Microphone", "Microphone Jack",
+		"Microphone", "Onboard Microphone",
+		"Headphone", "Headphones";
+};
+
+&fan {
+	/* FAN_CTL_H */
+	pwms = <&pwm9 0 50000 0>;
+};
+
+&hym8563 {
+	interrupt-parent = <&gpio0>;
+	interrupts = <RK_PC4 IRQ_TYPE_LEVEL_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rtc_int_l>;
+};
+
+&led_blue_pwm {
+	/* PWM_LED1 */
+	pwms = <&pwm4 0 25000 0>;
+	status = "okay";
+};
+
+&led_green_pwm {
+	/* PWM_LED2 */
+	pwms = <&pwm5 0 25000 0>;
+};
+
+/* phy2 */
+&pcie2x1l1 {
+	reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie_eth>;
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		rtc_int_l: hym8563-int {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sound {
+		hp_detect: hp-detect {
+			rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		usb_host_pwren: usb-host-pwren {
+			rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usb_otg_pwren: usb-otg-pwren {
+			rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm4m0_pins>;
+	status = "okay";
+};
+
+&pwm5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm5m1_pins>;
+	status = "okay";
+};
+
+&pwm9 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm9m2_pins>;
+	status = "okay";
+};
+
+&sfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&fspim2_pins>;
+};
+
+/* pcie eth. not a real regulator. 33VAUX */
+&vcc3v3_pcie_eth {
+	/* Ethernet_power_en */
+	gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>;
+};
+
+/*
+ * Represents the vcc5v0_usb20 and vcc5v0_usb30 in the schematic,
+ * both regulators share the same enable gpio
+ */
+&vcc5v0_usb20 {
+	/* USB_HOST_PWREN */
+	gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb_host_pwren>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi
index 3c6e1321f13f..6459a277f973 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi
@@ -95,6 +95,14 @@ fan: pwm-fan {
 	pwm-leds {
 		compatible = "pwm-leds";
 
+		led_blue_pwm: led-1 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			linux,default-trigger = "heartbeat";
+			max-brightness = <255>;
+			status = "disabled";
+		};
+
 		led_green_pwm: led-2 {
 			color = <LED_COLOR_ID_GREEN>;
 			function = LED_FUNCTION_INDICATOR;
-- 
2.47.0

Re: [PATCH 2/3 v3] dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Max

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 357 bytes --]

On Sun, Nov 10, 2024 at 10:53:25PM -0600, Jimmy Hon wrote:
> Add devicetree binding for the Xunlong Orange Pi 5 Max board.
> 
> The Orange Pi 5 Max is a single board computer powered by the Rockchip
> RK3588 similar to the Orange Pi 5 Plus.
> 
> Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>

Acked-by: Conor Dooley <conor.dooley@microchip.com>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH 2/3 v3] dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Max

[Rob Herring (Arm)]

On Sun, 10 Nov 2024 22:53:25 -0600, Jimmy Hon wrote:
> Add devicetree binding for the Xunlong Orange Pi 5 Max board.
> 
> The Orange Pi 5 Max is a single board computer powered by the Rockchip
> RK3588 similar to the Orange Pi 5 Plus.
> 
> Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
> ---
>  Documentation/devicetree/bindings/arm/rockchip.yaml | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 


Please add Acked-by/Reviewed-by tags when posting new versions. However,
there's no need to repost patches *only* to add the tags. The upstream
maintainer will do that for acks received on the version they apply.

If a tag was not added on purpose, please state why and what changed.

Missing tags:

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Re: [PATCH 2/3 v3] dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Max

[Jimmy Hon]

On Mon, Nov 11, 2024 at 2:57 PM Rob Herring (Arm) <robh@kernel.org> wrote:
>
>
> On Sun, 10 Nov 2024 22:53:25 -0600, Jimmy Hon wrote:
> > Add devicetree binding for the Xunlong Orange Pi 5 Max board.
> >
> > The Orange Pi 5 Max is a single board computer powered by the Rockchip
> > RK3588 similar to the Orange Pi 5 Plus.
> >
> > Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
> > ---
> >  Documentation/devicetree/bindings/arm/rockchip.yaml | 6 ++++--
> >  1 file changed, 4 insertions(+), 2 deletions(-)
> >
>
>
> Please add Acked-by/Reviewed-by tags when posting new versions. However,
> there's no need to repost patches *only* to add the tags. The upstream
> maintainer will do that for acks received on the version they apply.
>
> If a tag was not added on purpose, please state why and what changed.
This v3 version is now sharing a base dtsi with the Orange Pi 5 Plus.
So it's not a separate entry in the dt-bindings like it was in v2.

I'm eager to hear from the Orange Pi 5 Plus maintainer if this
approach is good, or if the boards are considered two divergent and
trying to share a dtsi is going to cause more headaches when enabling
features that are unique to the Orange Pi 5 Plus.

In this case, it's not as similar as the NanoPi R6C vs R6S or the
Orange Pi 5 vs Pi 5B.

So if we decide to use the common approach, I can use Conor's Ack. But
if we decide to use the separate approach, I can use your Ack from v2.

>
> Missing tags:
>
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
>
>

Jimmy

Re: [PATCH 3/3 v3] arm64: dts: rockchip: Add Orange Pi 5 Max board

[Marco Schirrmeister]

Hello Jimmy,

On Mon, Nov 11, 2024 at 6:01 AM Jimmy Hon <honyuenkwun@gmail.com> wrote:
>
> The RK3588 Single Board Computer includes
> - eMMC
> - microSD
> - UART
> - 2 PWM LEDs
> - RTC
> - RTL8125 network controller on PCIe 2.0x1.
> - M.2 M-key connector routed to PCIe 3.0x4
> - PWM controlled heat sink fan.
> - 2 USB2 ports
> - lower USB3 port
> - upper USB3 port with OTG capability
> - Mali GPU
> - SPI NOR flash
> - Mask Rom button
> - Analog audio using es8388 codec via the headset jack and onboard mic
> - HDMI0

in your v1 patch series you mentioned you do not have access to EMMC
to test. I am happy to test EMMC, but I had problems with the v2 and
v3 patches.
v2 dts did not compile and I was getting errors for the hdmi0 entries
like "Label or path hdmi0 not found". I assume I am missing patches.
After removing it compiles but the board does not boot.

v3 patches don't work against 6.12-rc6/rc7 snapshot. The patch that
modifies the 5 plus dts fails. I again assume I am missing other
patches.

If you have some info with which kernel or other modifications I can
use your patches, then I am happy to do some testing.

Cheers,
Marco

Re: [PATCH 3/3 v3] arm64: dts: rockchip: Add Orange Pi 5 Max board

[Jimmy Hon]

>
> in your v1 patch series you mentioned you do not have access to EMMC
> to test. I am happy to test EMMC, but I had problems with the v2 and
> v3 patches.
> v2 dts did not compile and I was getting errors for the hdmi0 entries
> like "Label or path hdmi0 not found". I assume I am missing patches.
> After removing it compiles but the board does not boot.
>
> v3 patches don't work against 6.12-rc6/rc7 snapshot. The patch that
> modifies the 5 plus dts fails. I again assume I am missing other
> patches.
>
> If you have some info with which kernel or other modifications I can
> use your patches, then I am happy to do some testing.

If your primary focus is to only test eMMC support for the Orange Pi 5
Max, then apply the patches on top linux-rockchip for-next.
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git/log/?h=for-next
That generated DTB should be able to run against an older kernel since
the Orange Pi 5 Plus already works.

It's complicated since the HDMI Bridge support is in the pipeline for
6.13-rc1 but it goes through different trees..
The driver itself is merged into drm-misc next

Where as the DTS updates are in linux-rockchip branch

Also, regarding v3, I rebased on top of linux-rockchip for-next to
include the updates for HDMI and GPU on the Orange Pi 5 Plus.

For my development testing, I used Collabora's rk3588-test development
branch, so all the needed patches were already in one place (since
they test on a Radxa Rock 5B with the RK3588).
https://gitlab.collabora.com/hardware-enablement/rockchip-3588/linux/-/commits/rk3588-test/?ref_type=heads

So for v3, I had to first cherry-pick the Orange Pi 5 Plus changes
from linux-rockchip for-next.

Note: for v3 I held off on adding the USB 3 support for the Max, I was
going to let the Orange Pi 5 Plus finish their USB 3 submission before
trying to refactor the common DTS nodes.
https://lore.kernel.org/linux-rockchip/20241025175415.887368-1-wens@kernel.org/

>
> Cheers,
> Marco

Re: [PATCH 3/3 v3] arm64: dts: rockchip: Add Orange Pi 5 Max board

[Marco Schirrmeister]

Hello Jimmy,

sorry for my late reply.

On Fri, Nov 15, 2024 at 5:56 PM Jimmy Hon <honyuenkwun@gmail.com> wrote:

> If your primary focus is to only test eMMC support for the Orange Pi 5
> Max, then apply the patches on top linux-rockchip for-next.
> https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git/log/?h=for-next
> That generated DTB should be able to run against an older kernel since
> the Orange Pi 5 Plus already works.

applying v2 patches was working fine with this kernel. But I still had
the same problem when booting, where it is stuck during hardware
initialization.
Need to check more on this and retry with the latest version.

> Also, regarding v3, I rebased on top of linux-rockchip for-next to
> include the updates for HDMI and GPU on the Orange Pi 5 Plus.
>
> For my development testing, I used Collabora's rk3588-test development
> branch, so all the needed patches were already in one place (since
> they test on a Radxa Rock 5B with the RK3588).
> https://gitlab.collabora.com/hardware-enablement/rockchip-3588/linux/-/commits/rk3588-test/?ref_type=heads
>
> So for v3, I had to first cherry-pick the Orange Pi 5 Plus changes
> from linux-rockchip for-next.

I was not successful with applying the patches yet with the Collabora
branch you mentioned. I guess I did not cherry pick the right ones,
yet.
I will do some more testing to see if I can figure it out. Otherwise I
will wait until the first version is merged and test then.