[PATCH v3 2/4] drm/bridge: imx8mp-hdmi-tx: switch to bridge DRM_BRIDGE_ATTACH_NO_CONNECTOR

[Marek Vasut <marex@denx.de>]

The dw-hdmi output_port is set to 1 in order to look for a connector
next bridge in order to get DRM_BRIDGE_ATTACH_NO_CONNECTOR working.
The output_port set to 1 makes the DW HDMI driver core look up the
next bridge in DT, where the next bridge is often the hdmi-connector .

Similar to 0af5e0b41110 ("drm/meson: encoder_hdmi: switch to bridge DRM_BRIDGE_ATTACH_NO_CONNECTOR")

Note that looking at the upstream arch/arm64/boot/dts/freescale/imx8mp*dts ,
the oldest commit which adds HDMI support is commit:

3e67a1ddd56d ("arm64: dts: imx8mp: Enable HDMI on TQMa8MPxL/MBa8MPxL")

That already contains the HDMI connector node. Most follow up additions
of HDMI support to another devices has been a variation of the same commit,
including connector node, which is the proper way of eanbling HDMI on the
i.MX8MP.

The rest should be covered by output_port_optional which should make systems
with DTs without HDMI connector node work, but such DTs should be updated and
the HDMI connector node should be added.

Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Liu Ying <victor.liu@nxp.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: dri-devel@lists.freedesktop.org
Cc: imx@lists.linux.dev
Cc: linux-arm-kernel@lists.infradead.org
---
V2: No change
V3: - Update commit message
    - Move select DRM_DISPLAY_CONNECTOR to DRM_IMX8MP_DW_HDMI_BRIDGE
    - Enable output_port_optional
---
 drivers/gpu/drm/bridge/imx/Kconfig          | 1 +
 drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c | 2 ++
 2 files changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/bridge/imx/Kconfig b/drivers/gpu/drm/bridge/imx/Kconfig
index 9a480c6abb856..db5c8a76193ac 100644
--- a/drivers/gpu/drm/bridge/imx/Kconfig
+++ b/drivers/gpu/drm/bridge/imx/Kconfig
@@ -17,6 +17,7 @@ config DRM_IMX8MP_DW_HDMI_BRIDGE
 	tristate "Freescale i.MX8MP HDMI-TX bridge support"
 	depends on OF
 	depends on COMMON_CLK
+	select DRM_DISPLAY_CONNECTOR
 	select DRM_DW_HDMI
 	imply DRM_IMX8MP_HDMI_PVI
 	imply PHY_FSL_SAMSUNG_HDMI_PHY
diff --git a/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c b/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c
index 1e7a789ec2890..3d63200e468bf 100644
--- a/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c
+++ b/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c
@@ -101,6 +101,8 @@ static int imx8mp_dw_hdmi_probe(struct platform_device *pdev)
 	plat_data->phy_name = "SAMSUNG HDMI TX PHY";
 	plat_data->priv_data = hdmi;
 	plat_data->phy_force_vendor = true;
+	plat_data->output_port = 1;
+	plat_data->output_port_optional = true;
 
 	hdmi->dw_hdmi = dw_hdmi_probe(pdev, plat_data);
 	if (IS_ERR(hdmi->dw_hdmi))
-- 
2.45.2