From: Francesco Dolcini <francesco@dolcini.it>
To: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
Tero Kristo <kristo@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Francesco Dolcini <francesco.dolcini@toradex.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v1 0/6] arm64: dts: ti: Add Toradex Verdin AM62P
Date: Wed, 30 Apr 2025 12:28:09 +0200 [thread overview]
Message-ID: <20250430102815.149162-1-francesco@dolcini.it> (raw)
From: Francesco Dolcini <francesco.dolcini@toradex.com>
This series adds support for the Toradex Verdin AM62 SoM which can be used on
different carrier boards (Verdin Development Board, Dahlia, Yavia, Mallow and
Ivy).
The module consists of an TI AM62P family SoC, a TPS65219 PMIC, a Gigabit
Ethernet PHY, up to 8GB of LPDDR4 RAM, an eMMC, a TLA2024 ADC, an I2C EEPROM,
an RX8130 RTC, plus an optional Bluetooth/Wi-Fi module.
Link: https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
Francesco Dolcini (6):
dt-bindings: arm: ti: Add Toradex Verdin AM62P
arm64: dts: ti: add Toradex Verdin AM62P
arm64: dts: ti: am62p-verdin: add dahlia
arm64: dts: ti: am62p-verdin: add mallow
arm64: dts: ti: am62p-verdin: add yavia
arm64: dts: ti: am62p-verdin: add ivy
.../devicetree/bindings/arm/ti/k3.yaml | 24 +
arch/arm64/boot/dts/ti/Makefile | 10 +
.../boot/dts/ti/k3-am62p-verdin-dahlia.dtsi | 228 +++
.../boot/dts/ti/k3-am62p-verdin-dev.dtsi | 245 +++
.../boot/dts/ti/k3-am62p-verdin-ivy.dtsi | 629 ++++++++
.../boot/dts/ti/k3-am62p-verdin-mallow.dtsi | 213 +++
.../boot/dts/ti/k3-am62p-verdin-nonwifi.dtsi | 15 +
.../boot/dts/ti/k3-am62p-verdin-wifi.dtsi | 31 +
.../boot/dts/ti/k3-am62p-verdin-yavia.dtsi | 219 +++
arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi | 1405 +++++++++++++++++
.../ti/k3-am62p5-verdin-nonwifi-dahlia.dts | 22 +
.../dts/ti/k3-am62p5-verdin-nonwifi-dev.dts | 22 +
.../dts/ti/k3-am62p5-verdin-nonwifi-ivy.dts | 22 +
.../ti/k3-am62p5-verdin-nonwifi-mallow.dts | 22 +
.../dts/ti/k3-am62p5-verdin-nonwifi-yavia.dts | 22 +
.../dts/ti/k3-am62p5-verdin-wifi-dahlia.dts | 22 +
.../boot/dts/ti/k3-am62p5-verdin-wifi-dev.dts | 22 +
.../boot/dts/ti/k3-am62p5-verdin-wifi-ivy.dts | 22 +
.../dts/ti/k3-am62p5-verdin-wifi-mallow.dts | 22 +
.../dts/ti/k3-am62p5-verdin-wifi-yavia.dts | 22 +
20 files changed, 3239 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-am62p-verdin-dahlia.dtsi
create mode 100644 arch/arm64/boot/dts/ti/k3-am62p-verdin-dev.dtsi
create mode 100644 arch/arm64/boot/dts/ti/k3-am62p-verdin-ivy.dtsi
create mode 100644 arch/arm64/boot/dts/ti/k3-am62p-verdin-mallow.dtsi
create mode 100644 arch/arm64/boot/dts/ti/k3-am62p-verdin-nonwifi.dtsi
create mode 100644 arch/arm64/boot/dts/ti/k3-am62p-verdin-wifi.dtsi
create mode 100644 arch/arm64/boot/dts/ti/k3-am62p-verdin-yavia.dtsi
create mode 100644 arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi
create mode 100644 arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-dahlia.dts
create mode 100644 arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-dev.dts
create mode 100644 arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-ivy.dts
create mode 100644 arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-mallow.dts
create mode 100644 arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-yavia.dts
create mode 100644 arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-dahlia.dts
create mode 100644 arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-dev.dts
create mode 100644 arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-ivy.dts
create mode 100644 arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-mallow.dts
create mode 100644 arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-yavia.dts
--
2.39.5
next reply other threads:[~2025-04-30 10:56 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-30 10:28 Francesco Dolcini [this message]
2025-04-30 10:28 ` [PATCH v1 1/6] dt-bindings: arm: ti: Add Toradex Verdin AM62P Francesco Dolcini
2025-04-30 15:30 ` Conor Dooley
2025-04-30 10:28 ` [PATCH v1 2/6] arm64: dts: ti: add " Francesco Dolcini
2025-04-30 10:28 ` [PATCH v1 3/6] arm64: dts: ti: am62p-verdin: add dahlia Francesco Dolcini
2025-04-30 10:28 ` [PATCH v1 4/6] arm64: dts: ti: am62p-verdin: add mallow Francesco Dolcini
2025-04-30 10:28 ` [PATCH v1 5/6] arm64: dts: ti: am62p-verdin: add yavia Francesco Dolcini
2025-04-30 10:28 ` [PATCH v1 6/6] arm64: dts: ti: am62p-verdin: add ivy Francesco Dolcini
2025-05-02 14:44 ` [PATCH v1 0/6] arm64: dts: ti: Add Toradex Verdin AM62P Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250430102815.149162-1-francesco@dolcini.it \
--to=francesco@dolcini.it \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=francesco.dolcini@toradex.com \
--cc=kristo@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox