[PATCH 0/3] arm64: dts: rockchip: Add device tree for the Orange Pi CM5 Base board

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hello,

This patch series adds a device tree for the Orange Pi CM5 Base board
from Xunlong. This is a combination of a compute module and a carrier
board, so the device tree is split in two files.

The work is based on a combination of upstream device trees for other
RK3588-based Orange Pi boards and the downstream device tree, all
checked against the available schematics for the carrier board. The
compute module schematics is unfortunately not available.

The series starts by adding a new compatible for the board to
arm/rockchip.yaml. The next patch documents a missing property in the
rk3588-dw-hdmi-qp bindings that the device tree needs. Finally, the last
patch adds the device tree.

Patch 2/3 may be slightly controversial as the new DT property could be
better named. It has been supported in the driver for a year now, so
there could be users in the wild. I have therefore decided to keep the
current name. I am open to alternative solutions.

Laurent Pinchart (3):
  dt-bindings: arm: rockchip: Add Orange Pi CM5 Base
  dt-bindings: display: rk3588-dw-hdmi-qp: Document enable-gpios
    property
  arm64: dts: rockchip: Add rk3588s-orangepi-cm5-base device tree

 .../devicetree/bindings/arm/rockchip.yaml     |   6 +
 .../rockchip/rockchip,rk3588-dw-hdmi-qp.yaml  |   4 +
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../rockchip/rk3588s-orangepi-cm5-base.dts    | 342 +++++++++++++
 .../dts/rockchip/rk3588s-orangepi-cm5.dtsi    | 450 ++++++++++++++++++
 5 files changed, 803 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-orangepi-cm5-base.dts
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-orangepi-cm5.dtsi


base-commit: c17b750b3ad9f45f2b6f7e6f7f4679844244f0b9
-- 
Regards,

Laurent Pinchart